Ebony Black 4x4 Saff
#83
PassionFord Post Troll
Looking really good, you can buy a blanking plug from Anembo engineering to replace the fitting on the inlet for the factory oil breather rather than using a hose with a bung, that's what I did with mine looks a lot better.
Keep up the good work
Keep up the good work
#88
engine running for the first time. started on the button with new CW loom. the one thing i didnt change was the water pump due to the price of the things and in typical cossie fashion, it leaks from the feed pipe which was a bit corroded new water pump it is then.
https://1drv.ms/v/s!AttvzAYcaToWkFTPilvy86rCZSUf
https://1drv.ms/v/s!AttvzAYcaToWkFTPilvy86rCZSUf
Last edited by chrisa3; 25-11-2016 at 10:01 PM.
#89
Advanced PassionFord User
iTrader: (1)
engine running for the first time. started on the button with new CW loom. the one thing i didnt change was the water pump due to the price of the things and in typical cossie fashion, it leaks from the feed pipe which was a bit corroded new water pump it is then.
https://1drv.ms/v/s!AttvzAYcaToWkFTPilvy86rCZSUf
https://1drv.ms/v/s!AttvzAYcaToWkFTPilvy86rCZSUf
#90
exterior finished
All the paintwork finally finished. both rear arches have been replaced, new genuine front wing. rest of the car flattened back with 3000 wet and dry.
<img src="https://zp1q9a-sn3301.files.1drv.com/y3m6BJVvqRDy8NTZ3pQ_3CvA0rnJ1pIfNco3BDqT1FFk0rNTc6 Hh9g9CxhPn12W6xaUHmTs4OoQMaEg6Vo5iHRWR7f9sWkKAhg1-1ddibh02h-EQi6NAj32-mX5wPvJE2-eP2wlFez2KjPp-D6Bm71cXYTNICyXotup0RtDZtyVsoc?width=660&height=37 1&cropmode=none" width="660" height="371" />
<img src="https://yf1q9a-sn3301.files.1drv.com/y3mdB2dYIO5fZ7ssWHxHtlmOdfHc-sF0vnFEeLZgv9PGqcpZi8CQBXrj7y_yPhlshTON00vq8gcRK0a LTMKOoX3Y_z3I-QU3gVGeeLXRQDbH6RFwd27HSDP4GRNs1PH8IXmjflR1YHPpLWC bepBFPDeilpoFgpJDdvbHABwsaV5DdM?width=371&height=6 60&cropmode=none" width="371" height="660" />
<img src="https://zp1q9a-sn3301.files.1drv.com/y3m6BJVvqRDy8NTZ3pQ_3CvA0rnJ1pIfNco3BDqT1FFk0rNTc6 Hh9g9CxhPn12W6xaUHmTs4OoQMaEg6Vo5iHRWR7f9sWkKAhg1-1ddibh02h-EQi6NAj32-mX5wPvJE2-eP2wlFez2KjPp-D6Bm71cXYTNICyXotup0RtDZtyVsoc?width=660&height=37 1&cropmode=none" width="660" height="371" />
<img src="https://yf1q9a-sn3301.files.1drv.com/y3mdB2dYIO5fZ7ssWHxHtlmOdfHc-sF0vnFEeLZgv9PGqcpZi8CQBXrj7y_yPhlshTON00vq8gcRK0a LTMKOoX3Y_z3I-QU3gVGeeLXRQDbH6RFwd27HSDP4GRNs1PH8IXmjflR1YHPpLWC bepBFPDeilpoFgpJDdvbHABwsaV5DdM?width=371&height=6 60&cropmode=none" width="371" height="660" />
The following users liked this post:
chrisa3 (30-12-2016)
#94
update
Bit more done on the shed. got the strut brace powder coated and made a mount for the breather. painted it satin black as well as wasnt too keen and too much silver.
Just need to get the hoses swapped out for black ones next.
Just need to get the hoses swapped out for black ones next.
#98
thanks for allt he comments . got some teething problems, but keep forgetting its a cossie
went over the outside today and cleaned all the plastics. Used some of those magic eraser sponges and they are amazing. take all the wax stains and shite away which was making them look grey.
passed is mot with no advisories as well.
went over the outside today and cleaned all the plastics. Used some of those magic eraser sponges and they are amazing. take all the wax stains and shite away which was making them look grey.
passed is mot with no advisories as well.
#99
I've found that life I needed.. It's HERE!!
Really does look stunning mate out in the sunshine any links to this wax eraser I need one of them for my daily looks like someone has polished all the plastics with the paintwork
#101
Yeah got 2 knuckles and stub shafts from jason. Got some SKF bearings fitted today so going to take the car down to the unit tomorrow and swap them out.
#103
Advanced PassionFord User
Looks minty mate, top job
Cheers Paul
Cheers Paul
The following users liked this post:
greendragon3 (03-06-2017)
Thread
Thread Starter
Forum
Replies
Last Post
BMG
General Car Related Discussion.
2
11-05-2016 09:04 PM
lee2cossies
Ford RS Cosworth Parts for Sale
1
11-05-2016 06:49 PM
bgreywolf
General Car Related Discussion.
11
07-05-2016 11:31 AM