djryan25

Another job I thought would only take half an hour. Decided to paint the edges of the disc to help with corrosion. They match the front now. Also coloured the bolts. I may see if I can get some titanium ones to fit.

djryan25

Finished my latest mod. Custom one off boost pod. Here's a little vid

djryan25

Managed to prep the rear ready for my big brakes. all cleaned, painted and wheels have hasd a ceramic coating with gtechnic c5 on the inside, the cant get wet so ive had to cover them up, also made and replaced my mudflaps. not bad for an afternoons work

djryan25

Had a spare morning so i stripped down the front calipers to regrease and clean down.
Also cleaned all the arches down. Calipers and wheels have had a coat of c5

djryan25

There on. Ended up having two new bearings too. Also put one eye brow on. Snows back lol

PaulinhoT

They do look rather nice well done

djryan25

Few pics before the rain. 90% ready for Thoresby show on Sunday. Weather permitting

djryan25

djryan25

Couldnt make any shows today as i was djin to thecearly hors. I have managed to fit my reverse camera today. Took me ages as I've made it all fit neatly. All soldered and heat shrunk connections. Plus I wanted to keep my reg plate bulb holders so I've cut a nest hole for the camera to sit in. Also changed the front wing decals. Dmb sent me some longer decals.

djryan25

Got rid of the black and silver badges and replaced with black and red to match the theme. Also one I've done for a mates transit.

djryan25

Just a few pictures from today's meeting in Doncaster.

djryan25

So I decided to have a go at doing my own headlights. Just on with the second but the first has come out really well. I've matt blacked all the chrome and sprayed the hid cover sea grey. Not very noticeable on the pictures. I could have gone all out with fancied bits but there just wasted on me. And not the look I was after. I have added red demon eyes with remote tho just for shows.

djryan25

few recent pics












managed to get one of the first anembo cam covers. wasnt a two minute job as first thought. but me being me with my ocd i ended up painting all the screws to tidy them up. painted the bits of the cover not covered by the cover. and then just a general good clean up. not all finished but the rain come.

djryan25

Lots of new photos with the new camera. For my first shots I love them. Been to caravan over the weekend. Not much to do so got some beers and spent many hours on the car between showers. Bar the roof and wheels it's all had a few coats of wax and a good quick detailer on top.

djryan25

Also managed to fit another mod in while cleaning the car. Got rid of all the mess under the bonnet. Hidden hose and wires. Not a two minute job but we'll worth it.

Mondi-DZK

iTrader: (1)

Impressive shine.

I think you have to much time.

Under bonnet detail is a nice touch to!

djryan25

Cheers pal.

Everyone says that. I just do bits at a time. Don't drive it much due to having a work car. This weekend was a one of being at a families caravan. Not much else to do. Plus I wanted to try out the new camera.

Mondi-DZK

iTrader: (1)

It's nice to drive a (super) clean car.

djryan25

It's is. For the whole 10 minutes lol. Don't recommend black wheels. Especially rs ones. A pain to clean. And I've got ceramic coating on them.

djryan25

Another little mod to tidy the bay

djryan25

a few more pictures from the shoot.

djryan25

Just treat myself to a new intake. Pick it up Sunday. Also been cleaning the bay

djryan25

Few pics before leaving ford fair

AJB222

Stunning as always, looked great at ford fair!

djryan25

Cheers pal. I didn't do much walking round. Sun got to me lol

djryan25

Well on its way now. Prepped. Few more coats of primer then paint. Ordered a ecu holder. Bracket. Rubbers. Black jubilee. And 90 bend

djryan25

More work on the box tonight. Painted the air filter lid sea grey. The box matte black. Few more coats then it will be ready. I'll be putting a decal on of some sort. Not sure yet. If the car suits the new mod I may paint all the bay sea grey. We shall see.

craigfocus

is your grill hydro dipped? and love the shine puts my wrecker to shame ��

djryan25

Nearly there. Few more bits to come. Stickers not going on till fitted so I can line it up. Not to everyone's taste I know ow that. But if u have seen my bay it will hopefully all fit together.

djryan25

It's a stiffer grill. It is dipped. I think I was before it was all readily available.

djryan25

Been pretty much all day dismantling. Painting and rebuilding the air intake today. Not really a hard job but with all the planting cleaning. It's took some time. Molded my old slam panel. Looks better than a rs one.

djryan25

Another little mod today to clean up the bay. Looks fresh now.

djryan25

Finally fitted. Few things I need to finish off. Ordered some new wrap. Going to run it for a few days but seems to be running mint. Cut a little of the crossover so the maf can sit further up.

djryan25

djryan25

I'm at squiers meet Sunday. So gave the old girl a new set of rs plugs and a good clean. Only pt1 at the mo. I'm organising my engagement party so may not get any more done.

djryan25

A little mod from squiers. A gloss black Ariel and Base.

PaulinhoT

Lot's and lot's of tasty mods going on here well done the car looks lush.

djryan25

Cheers pal.

djryan25

Mate from bespoked has got a new product out. So I decided to have a custom made one done. Not sure if I'll use it at shows or just as my beer mat.

djryan25

Had another rolling shot done. Really like this one. Thinking of having the front done again to match.