Focus ST oem+ (im back 😁)
#81
Regular Contributor
Thread Starter
FAIL .. well i noticed a little slice in my gear gaitor. you could see it but i wanted it to be right. well i purchased one of the bay with red stitching. looked good but needed stretching an inch. a ball ache but i managed it. eventually got it fitted (while putting screwdriver through my hand) looked bang on. fitted it in the car today. too bloody tight. when i put it in reverse it pulls it out. so if any one knows of a decent gaitor, preferably with red stitching let us know.
a pic as it looked before fitting into the car..
a pic as it looked before fitting into the car..
#83
Regular Contributor
Thread Starter
The following users liked this post:
djryan25 (26-03-2015)
#86
Regular Contributor
Thread Starter
been busy this afternoon. ive took of my stoffler diffuser because it was peeling. its in primer and going to be gloss black for the time being. ive also taken off my carbon fibre mirror covers to re gloss. not finished but im on with it and finally sprayed the st logo on my boot mat red to match the rest of the car.
before
getting there
Boot Mat.
before
getting there
Boot Mat.
The following users liked this post:
djryan25 (20-03-2015)
#88
ffoc.co.uk
They came up very well, good job .
The following users liked this post:
djryan25 (20-03-2015)
#89
Regular Contributor
Thread Starter
#90
Regular Contributor
Thread Starter
#91
Regular Contributor
Thread Starter
eventually re fitted my mirrors and carbon fiber covers, rear diffuser and rear wiper. I ended up purchasing two new mirrors so they looked the same. (my ocd took over lol) bought some new wax so decided to give the car a clean.
i only bonded the drivers side this morning. so ive covered it and wrapped it with rubber bands for a little longer.
i only bonded the drivers side this morning. so ive covered it and wrapped it with rubber bands for a little longer.
The following users liked this post:
H3lsing (26-03-2015)
#97
Regular Contributor
Thread Starter
Well got another job done yesterday. Not looking forward going out to see if rains buggered it. Should be ok. I used a heat gun between every coat. And before anyone says. I couldnt take it of because the lovely owner fecided to bond it on lol.
Cant wait to get the vents done. Rains put hold on it all tho.
Cant wait to get the vents done. Rains put hold on it all tho.
#98
Regular Contributor
Thread Starter
Never heard owt bout that pal. Know a few with thhe older ones. I guess everything has faults. These one do look really well made to be honest. The pad carriers are all coated ect. Time will tell.
The following users liked this post:
H3lsing (05-04-2015)
#102
Regular Contributor
Thread Starter
#103
Regular Contributor
Thread Starter
Ooo the cleanings getting serious. thought id get some jobs out of the way while our lass is at work. got the dremel out to polish up the exhaust. best it would come up so might buy some new tips. also decided i dont like waxing rs wheels. never ending especially having to re clean them after taking the car for a quick spin ended up in a little blast after running into a fellow RS member lol.
#104
Advanced PassionFord User
Good thread and lovely cars these, keep up the good work.
The following users liked this post:
djryan25 (12-04-2015)
#106
Regular Contributor
Thread Starter
Bought another new toy, Hopefully the last for a bit. A pumaspeed plenum, Not so keen on the others on the market and the Anembo ones a bit pricey.also freshened up the engine bay. the cars also had another clean and all the leathers waxed.
Not the best pics of the interior. Its a rare sight seeing my fronts as there normally covered up.
Roll on friday for the K Sports.
Not the best pics of the interior. Its a rare sight seeing my fronts as there normally covered up.
Roll on friday for the K Sports.
The following users liked this post:
djryan25 (15-04-2015)
The following users liked this post:
djryan25 (15-04-2015)
#110
Regular Contributor
Thread Starter
it wasnt too bad. the car was running rough on idle at first, i thought id messed the seals up. finally figured it out i needed an extra bolt lol. you use your originals so i mush have been missing one and it was sucking air through the bolt hole.
I took it off 3 times to find the problem so you can imagine the mood i was in. Other than that it was easy. ive got nothing in the way, my ecu is connected to the K&N box.
I took it off 3 times to find the problem so you can imagine the mood i was in. Other than that it was easy. ive got nothing in the way, my ecu is connected to the K&N box.
#111
PassionFord Post Whore!!
Stunning car. I adore Focus ST's now ever since I went out in my friends st-2 with a load of mods. Before I wasn't a fan but now I need to own one haha. He booted it and it pinned me back in my seat while flying up the road. Doesn't the ST3 have the Sony sound system package? Any more plans?
#112
Regular Contributor
Thread Starter
The sony didnt last long. Ive always had a decent sound setup and the sony wasnt up to it. Plans. Ooo well its just a never ending. I think next job will be bushes.
The following users liked this post:
djryan25 (16-04-2015)
#114
Regular Contributor
Thread Starter
#115
Regular Contributor
Thread Starter
The following users liked this post:
djryan25 (19-04-2015)
The following users liked this post:
djryan25 (19-04-2015)
The following users liked this post:
djryan25 (19-04-2015)