My first Ford - mk2 fiesta. It's good to be back...
#42
The only way is dagenham
Thread Starter
Sorry mate not my cupa tea
Thanks mate will update some more this weekend
Thanks mate she's getting there.
Yep if i hadent of done she would of been crushed. and a mk2 fiesta is one of my dream cars so i wasn't going to lest that happen
Thanks mate
Thanks mate will be doing some more work on her this weekend so will update than
Yep if i hadent of done she would of been crushed. and a mk2 fiesta is one of my dream cars so i wasn't going to lest that happen
Thanks mate
Thanks mate will be doing some more work on her this weekend so will update than
#43
The only way is dagenham
Thread Starter
Hi all.
I've done a bit more work to the car over the past week.
T'cuting the rear wing
T'cuting half the boot.
And test fiting new resprayed matt black rear bumper. (sorry about the mess in front of the car lol)
I will do some more to the car tomorrow if not raining so will do some more updates
I would like also like to say a big thanks to TREVCOS as i have noticed that you have been following the project right from the start. So thanks buddy
I've done a bit more work to the car over the past week.
T'cuting the rear wing
T'cuting half the boot.
And test fiting new resprayed matt black rear bumper. (sorry about the mess in front of the car lol)
I will do some more to the car tomorrow if not raining so will do some more updates
I would like also like to say a big thanks to TREVCOS as i have noticed that you have been following the project right from the start. So thanks buddy
Last edited by sridgett; 15-08-2014 at 03:25 PM.
#44
10K+ Poster!!
Fair play you've done a great job on those wheels! Its coming on really good with you.
#45
The only way is dagenham
Thread Starter
#49
10K+ Poster!!
Looking good!
#51
10K+ Poster!!
Good stuff!
#53
The only way is dagenham
Thread Starter
Right so the valance is done.
Primer.
After 2 coats of paint.
After removal of masking tape and old MCN paper.lol
This is the 1st time i've ever sprayed anything like this so im chufed with how its come out.
Next thing to do as you can see is the wing.
Primer.
After 2 coats of paint.
After removal of masking tape and old MCN paper.lol
This is the 1st time i've ever sprayed anything like this so im chufed with how its come out.
Next thing to do as you can see is the wing.
Last edited by sridgett; 21-08-2014 at 10:20 AM.
#55
Too many posts.. I need a life!!
#56
The only way is dagenham
Thread Starter
#58
The only way is dagenham
Thread Starter
#60
Reminds me of my fiesta it was a 950 cc popular plus in same red I remember one summer me and my dad spaying it up and derusting it I had my wheels of at time and someone got around back off house and nicked mums bike but left the pepper pots lol I laughed as it wasnt that great of bike but it was fact that the wheels was worth more keep up good work
#61
The only way is dagenham
Thread Starter
Update.
Well a bit more has been done to the car. It's staring to look like a car again.lol
Repainted the front wing.
After removal of the masking tape. As you can see there is a small colour difference. But that wing is faded.
After some t-cuting and a coat of polish. And refiting the bumper,now matt black.
Towing point now also matt black.
Couple of quick shot's from the front and back.
Just the fooked up door to do next.
Also got a cover for it as been said where in for a bad winter.
Well that all for this weekend.
Kind regards sam
Repainted the front wing.
After removal of the masking tape. As you can see there is a small colour difference. But that wing is faded.
After some t-cuting and a coat of polish. And refiting the bumper,now matt black.
Towing point now also matt black.
Couple of quick shot's from the front and back.
Just the fooked up door to do next.
Also got a cover for it as been said where in for a bad winter.
Well that all for this weekend.
Kind regards sam
Last edited by sridgett; 31-08-2014 at 12:26 PM.
#62
10K+ Poster!!
That's looking really god with you! Be a minter in no time!
#63
The only way is dagenham
Thread Starter
Been a while since i've done any work to the the fezz, but though i would do the battery tray today!
After cutting it out, revealed a big rust hole in the inner wing!
the remains of the battery tray!
will make a new battery try at work, weld up the inner wing etc.........
After cutting it out, revealed a big rust hole in the inner wing!
the remains of the battery tray!
will make a new battery try at work, weld up the inner wing etc.........
Last edited by sridgett; 25-01-2015 at 02:00 PM.
#67
10K+ Poster!!
Its getting there, good to see you aint shy when it comes to rust, just cut the fucking lot out!
#68
The only way is dagenham
Thread Starter
It sure will dude, i'll be a very happy boy
Cheers mate. Yeah as you say there is no point in worrying about in, just crack on with it!
Cheers mate. Yeah as you say there is no point in worrying about in, just crack on with it!
#71
The only way is dagenham
Thread Starter
#74
The only way is dagenham
Thread Starter
Cheers mate, yeah there a great little car to work on. My new plan is to build a series "x" 1100 engine for it, it won't have as much power as some mk2's but it will be different! And still good for 100 odd bhp.
#75
The only way is dagenham
Thread Starter
Well after a long time i have done some work to my Fiesta, I fixed the hole buy the window, still not finished yet though
The hole
Welded
Filled after welded
Then sanded
The in primer to stop it rusting during the week while I can't work on the car
That's about it for now. I will fix the inperfections during next week end probably
The hole
Welded
Filled after welded
Then sanded
The in primer to stop it rusting during the week while I can't work on the car
That's about it for now. I will fix the inperfections during next week end probably
#76
10K+ Poster!!
Coming on very well with you. You do good welding repairs.
#77
The only way is dagenham
Thread Starter
#78
The only way is dagenham
Thread Starter
Evening all. Well recently thought I'd pop in to say hello and see what was going on. I must say I was so happy to see the forum was still going strong I thought I'd update this thread. Despite having a few nicer cars these days I still have this old banger. Here is what's been going on.....
First a lot of welding and rust repair
Some new parts...
Some more rust repair
Engine bay repainted and new batterie tray...
New front panel and test fit of wings...
Touch up of passenger sill and door pillar
And this is how it sits now. Its had to find the time to work on it these days with work and all that. But it will get there
First a lot of welding and rust repair
Some new parts...
Some more rust repair
Engine bay repainted and new batterie tray...
New front panel and test fit of wings...
Touch up of passenger sill and door pillar
And this is how it sits now. Its had to find the time to work on it these days with work and all that. But it will get there
Thread
Thread Starter
Forum
Replies
Last Post
steerfromdarear
Restorations, Rebuilds & Projects.
28
29-01-2016 06:14 PM
tlsjk
Restorations, Rebuilds & Projects.
39
22-09-2013 07:44 PM
leedsrhinos126
Restorations, Rebuilds & Projects.
1589
19-09-2012 09:09 AM