My Focus T190 **UPDATE 18/10/13**
#1
15000
Thread Starter
Join Date: Dec 2011
Location: Birkenhead
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
My Focus T190 **UPDATE 18/10/13**
here's a few pics of my '00 Panther Black Ford Focus T190
Got a few goodies!
2.1 Block with CP Pistons and Eagle Rods
Area Six fully ported and polished head with ultimate spool cams and piper vernier pulleys
WRC Waterpump
Pro Alloy Front Mount Intercooler
Full Miltek System with Decat and Flexi
GT28 Turbo
Siemens 63lb Injectors
AP 6 Paddle Clutch
Brembo 4 pot Calipers with Goodridge Braided Lines
O.Z Ultraleggera 18" Alloys
SPA Oil Temp and Boost Gauge
Since I've had it i've had the AP 6 paddle changed for a sachs full face and had Gaz (rst-G) change the gearbox to my Focus RS 'box with KAAZ diff!
and a pic of my oil breather set up going on this week;
Got a few things planned for her but nothing major at the min as im saving up for my next project
Got a few goodies!
2.1 Block with CP Pistons and Eagle Rods
Area Six fully ported and polished head with ultimate spool cams and piper vernier pulleys
WRC Waterpump
Pro Alloy Front Mount Intercooler
Full Miltek System with Decat and Flexi
GT28 Turbo
Siemens 63lb Injectors
AP 6 Paddle Clutch
Brembo 4 pot Calipers with Goodridge Braided Lines
O.Z Ultraleggera 18" Alloys
SPA Oil Temp and Boost Gauge
Since I've had it i've had the AP 6 paddle changed for a sachs full face and had Gaz (rst-G) change the gearbox to my Focus RS 'box with KAAZ diff!
and a pic of my oil breather set up going on this week;
Got a few things planned for her but nothing major at the min as im saving up for my next project
Last edited by joffo; 18-10-2013 at 08:13 PM.
#4
Ben
I really like these! Quite rare are they not?
Trending Topics
#8
15000
Thread Starter
Join Date: Dec 2011
Location: Birkenhead
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Nope, he sold it to the fella I bought it off
Was about 25 produced in 2000 so yeah
No Ian, I've still got the shell and quite a few bits, just deciding what route to take with it
Was about 25 produced in 2000 so yeah
No Ian, I've still got the shell and quite a few bits, just deciding what route to take with it
#11
15000
Thread Starter
Join Date: Dec 2011
Location: Birkenhead
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
PM on its way Ian!
nevsrevs - No pics at the minute, Will get a few this weekend, tbh its a bit bland at the min.
Was told by the previous its around 350BHP and it does feel it
nevsrevs - No pics at the minute, Will get a few this weekend, tbh its a bit bland at the min.
Was told by the previous its around 350BHP and it does feel it
#18
Advanced PassionFord User
Looking good
#21
I've found that life I needed.. It's HERE!!
I can't help but think without the spoiler and bonnet/ lights it would be such an awesome sleeper!
Although, how rare it is and what's on it make it uber cool!
Although, how rare it is and what's on it make it uber cool!
#24
15000
Thread Starter
Join Date: Dec 2011
Location: Birkenhead
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Not much of an update as I've tried to calm down spending money on cars lately
But fitted new rocker cover;
Before;
During;
After;
Thanks to Big Gaz Aka rst-g for sorting that out while I supervised
Might lose the red MSD coilpack, got some powdercoated heatshields and odd bits of carbon to fit but nothing much.
and had a tinted sunstrip fitted this morning;
But fitted new rocker cover;
Before;
During;
After;
Thanks to Big Gaz Aka rst-g for sorting that out while I supervised
Might lose the red MSD coilpack, got some powdercoated heatshields and odd bits of carbon to fit but nothing much.
and had a tinted sunstrip fitted this morning;
#26
15000
Thread Starter
Join Date: Dec 2011
Location: Birkenhead
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Quick pic of it all clean day before Ford Fair;
at ford fair;
So day after Ford Fair, one of the coolant pipes split and the car pissed itself. So decided to change the whole lot to Focus RS Roose ones as the way the coolant pipes ran before was a complete bodge job.
Water Temp Sensor moved from under thermostat housing into hose from stat to rad;
Had a few things powder coated while waiting for the hoses to be made and delivered;
Coil pack cleaned up and fitted to its freshly coated bracket;
Fans all build back up;
fitted with all new nuts and bolts;
And mated to its best mate (Pro Alloy Radiator);
Intercooler coated satin black;
and fitted;
Strut brace mounts coated same colour as coil pack bracket;
engine mount done the same and fitted with new Vibra Technic Road mount;
and VT gearbox mount fitted with coated battery/airbox tray;
Billet Thermostat housing fitted with RS adaptor plate for turbo feed;
Header tank freshly coated satin black;
Also relocated the battery to the boot to give more space for the breather set up, fresh MOT and 6 months Tax
Second day back on the road, sight glass on the header tank decided to give up on life and shat itself;
Luckily I had a new Ford one in the parts department! So fitted that and all good!
Got hold of some New wheels and a spare ST170 Rear beam read for the powdercoating and polybush treatment
at ford fair;
So day after Ford Fair, one of the coolant pipes split and the car pissed itself. So decided to change the whole lot to Focus RS Roose ones as the way the coolant pipes ran before was a complete bodge job.
Water Temp Sensor moved from under thermostat housing into hose from stat to rad;
Had a few things powder coated while waiting for the hoses to be made and delivered;
Coil pack cleaned up and fitted to its freshly coated bracket;
Fans all build back up;
fitted with all new nuts and bolts;
And mated to its best mate (Pro Alloy Radiator);
Intercooler coated satin black;
and fitted;
Strut brace mounts coated same colour as coil pack bracket;
engine mount done the same and fitted with new Vibra Technic Road mount;
and VT gearbox mount fitted with coated battery/airbox tray;
Billet Thermostat housing fitted with RS adaptor plate for turbo feed;
Header tank freshly coated satin black;
Also relocated the battery to the boot to give more space for the breather set up, fresh MOT and 6 months Tax
Second day back on the road, sight glass on the header tank decided to give up on life and shat itself;
Luckily I had a new Ford one in the parts department! So fitted that and all good!
Got hold of some New wheels and a spare ST170 Rear beam read for the powdercoating and polybush treatment
Last edited by joffo; 18-10-2013 at 08:12 PM.
#27
Advanced PassionFord User
This is all looking rather night
#28
PassionFord Regular
t190
Hi Mate - that looks awsome. Just wanted to ask if you have any problems after moving temp sensor from thermo housing to the adapter in the rad hose?
thanks - was thinking of doing the same.
thanks - was thinking of doing the same.
Thread
Thread Starter
Forum
Replies
Last Post
wowk
General Car Related Discussion.
4
30-03-2021 07:49 PM