When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well not a big update, I haven't had alot of time or money come to think of it.anyway I went to and it gave me the kick up the ass I needed to get cracking with it, so I brought some new hoses in RS green (rad induction. And washer jet)also got an afr gauge and a spoiler.
So iv fitted the new hoses and topped up with fluid,fitted my aux belt tensioner and measured up for my belt .
Just got to wire up my afr gauge no good with wiring but Il get there need to bleed my brakes but haven't got the right size spanner (must be a half size)
Just need to buy the rest of them I quite like the colour
Also my paint turned up today so. Need to get my arse in gear and get the car preped hope going to do that at the weekend also need need to bleed brakes.need it done before I get married next year lol
I managed to get the brakes bled what a drama that was couldn't get one of the bleed nipples to undo but after some messing with it I sorted it,got the handbrake all connected the I turned the engine over and all was good there so I put some momentum in it and it fired straight away so all good, but iv got a few issues it revs like took when you start it the it calms down and iv got a fuel leak from the tank but so be sorted soon
Just on its own at startup?? I suppose try cleaning the idle control valve and see how you get on. i had a sticky one on my old puma engine that used to stick at around 3k on startup.
Just on its own at startup?? I suppose try cleaning the idle control valve and see how you get on. i had a sticky one on my old puma engine that used to stick at around 3k on startup.
Yep on its own iv been told to check idle control valve tps and the power. Steering aswell
Iv not had any time to do anything lately,so iv decided to pull me finger out so I fitted my seat but the sidemounts didn't line up so had a little think and decided to chop the old seat up and came up with this still needs to be bolted together
That's essentially what I did with seats in my Puma, butchered the original subframe and pressed up some plates at work to weld into what was left. Worked quite well really!