J18 COS Cosworth rebuild and restoration
#127
RSHoleinator
iTrader: (10)
Try and keep away from Ford as much as you can as the prices of the stuff are just plain crazy
I've got the Ford microcat system on one of my computers at home so I can get all the FINIS numbers for the special bolts like the beam/diff/arms/Blue prop bolts etc.
Most of the other nuts/bolts/washer are standard sizes, so I bought bulk and had them zonc plated.
I remember the flanged bolts hard to find, the bolts for the arms and the long bolt through the diff M12x210mm
If your stuck with any let me know and tell you where I got them
I've got the Ford microcat system on one of my computers at home so I can get all the FINIS numbers for the special bolts like the beam/diff/arms/Blue prop bolts etc.
Most of the other nuts/bolts/washer are standard sizes, so I bought bulk and had them zonc plated.
I remember the flanged bolts hard to find, the bolts for the arms and the long bolt through the diff M12x210mm
If your stuck with any let me know and tell you where I got them
#128
I would like the build to be finished though so I can get back on the RS scene again and start back up attending some meetings
#130
Apologies for the few updates, small purchases have been made to stock pile the bits needed for the steering, pics to follow....
Anyway, I would like to ask what people's opinions are on Samco hoses,
I will be ordering up a full set of new Samco's and can't decide wether to go for shiney silicone Black or go for the Classic Matt black??
Any input greatly received, thanks boys
Anyway, I would like to ask what people's opinions are on Samco hoses,
I will be ordering up a full set of new Samco's and can't decide wether to go for shiney silicone Black or go for the Classic Matt black??
Any input greatly received, thanks boys
#139
http://www.cbsonline.co.uk/product/H...sulation_HTMAT
and a litre tin of this,
http://www.cbsonline.co.uk/product/H...ve_1Ltr_ADHCON
bit patience and it'll look nice
#141
PassionFord Regular
iTrader: (1)
No problem, I bought a metre length of this,
http://www.cbsonline.co.uk/product/H...sulation_HTMAT
and a litre tin of this,
http://www.cbsonline.co.uk/product/H...ve_1Ltr_ADHCON
bit patience and it'll look nice
http://www.cbsonline.co.uk/product/H...sulation_HTMAT
and a litre tin of this,
http://www.cbsonline.co.uk/product/H...ve_1Ltr_ADHCON
bit patience and it'll look nice
#142
PassionFord Post Troll
iTrader: (11)
Mike,I love the look of this sapp,reminds me of the Moony J plater which was totally standard to,I owned mine in 1999,was a 1 owner car aswell.
The car looks awesome,the underside is something else,great work,credit where it's due fair play to you.I look forward to more updates as an when etc.
Thanks.Lee.
The car looks awesome,the underside is something else,great work,credit where it's due fair play to you.I look forward to more updates as an when etc.
Thanks.Lee.
#143
Mike,I love the look of this sapp,reminds me of the Moony J plater which was totally standard to,I owned mine in 1999,was a 1 owner car aswell.
The car looks awesome,the underside is something else,great work,credit where it's due fair play to you.I look forward to more updates as an when etc.
Thanks.Lee.
The car looks awesome,the underside is something else,great work,credit where it's due fair play to you.I look forward to more updates as an when etc.
Thanks.Lee.
Mines a 2 owner car, me being the 3rd
#144
Been buying some new bits which have been arriving over the last couple of weeks
Brand new Genuine Ford water pump, complete with refurbed pulley and new bolts replated in gold zinc.
Brand new ISCV
Magnetic plug for the rear diff. Plating on it is poor so not sure what to do with it
Complete set of new, old stock Motorcraft belts for alternator and power steering pump
and Gates belts, not sure which to use,
New genuine Crank sensor
Tarox G88 disc's for the rear
I will be fitting Ferodo DS2500 pads soon. The idea is to get the car running and use it for a bit before going for the Reyland conversion (that way I dont need to fork out on pads again if I already have them)
Brand new Genuine Ford water pump, complete with refurbed pulley and new bolts replated in gold zinc.
Brand new ISCV
Magnetic plug for the rear diff. Plating on it is poor so not sure what to do with it
Complete set of new, old stock Motorcraft belts for alternator and power steering pump
and Gates belts, not sure which to use,
New genuine Crank sensor
Tarox G88 disc's for the rear
I will be fitting Ferodo DS2500 pads soon. The idea is to get the car running and use it for a bit before going for the Reyland conversion (that way I dont need to fork out on pads again if I already have them)
Last edited by Cossy Mike; 07-04-2013 at 01:23 PM.
#148
Bit of a headache the discs....cost £60 but they sent solid discs had to return them and pay an extra £50, £110 all together.
I want the Reyland conversion for the rear once it's on the road but I can't honestly afford AP's for the front so we'll have to see what happens...
I want the Reyland conversion for the rear once it's on the road but I can't honestly afford AP's for the front so we'll have to see what happens...
#150
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
Received 1,042 Likes
on
996 Posts
Bit of a headache the discs....cost £60 but they sent solid discs had to return them and pay an extra £50, £110 all together.
I want the Reyland conversion for the rear once it's on the road but I can't honestly afford AP's for the front so we'll have to see what happens...
I want the Reyland conversion for the rear once it's on the road but I can't honestly afford AP's for the front so we'll have to see what happens...
#151
wow! You're doing a great job properly! I don't know much but i know when i see something done properly. In afrikaans there's a saying "bo bont en onder stront" which basically means "nice on top but underneath sh%tty. Can hardly wait to see the end result. So hurry up now!
#155
Brakes fitted up this morning as I had a couple of hours to myself, just needs handbrake adjusting now.
Tarox G88 discs, new calipers and Ferodo DS2500 pads,
Got a good deal on them to,
Poor photo's I know but it's a new camera and battery was going flat, I think I'll stick with the iphone
Samco hoses have been ordered up and I've been informed of 5/8 weeks lead time
Tarox G88 discs, new calipers and Ferodo DS2500 pads,
Got a good deal on them to,
Poor photo's I know but it's a new camera and battery was going flat, I think I'll stick with the iphone
Samco hoses have been ordered up and I've been informed of 5/8 weeks lead time
Last edited by Cossy Mike; 12-04-2013 at 06:47 PM.