3dr cosworth!! Frozen white, carbon roof, caged, full rebuild an remapped !!15/4/18
#125
PassionFord Regular
Thread Starter
#128
PassionFord Regular
Thread Starter
Done a bit more the interior is in primer, the aerocatches are in the bonnet an boot. All the new steering rack parts are on hubs, shocks etc. The back is on the floor but had to send the front shock plates an all alloys tanks brace etc off for powdercoating! i will put more pics up when i take them. feel like its getting somewere now!
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
#131
PassionFord Regular
Thread Starter
#133
PassionFord Regular
Thread Starter
#135
PassionFord Regular
Thread Starter
Been doing a bit more ARB on an spacers so the wheels could be fitted now its one the ground!! Feels like it getting somewere now . Hasn't been on all 4s since 2011. Also few other bits so if its nice over the weekend be getting some sun on her an fitting bits. Hopefully sort the engine out with new gaskets aswel
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Last edited by bull-turbo; 16-05-2014 at 06:54 PM.
#139
PassionFord Regular
Thread Starter
Its a omp deep dish its off my mates old car only using it to move it about ill get a new one then. Its well worn in suede lol.
An thanks for the nice comments guys!!
An thanks for the nice comments guys!!
Last edited by bull-turbo; 16-05-2014 at 10:22 PM.
#140
PassionFord Regular
Thread Starter
#142
PassionFord Regular
Thread Starter
#144
PassionFord Regular
Thread Starter
#146
PassionFord Regular
Thread Starter
#147
Regular Contributor
#149
10K+ Poster!!
Its coming on great with you, will be a lovely car when done.
#150
PassionFord Regular
Thread Starter
Been doing a bit more, The cage an rear strut brace is painted (gunmetal) an fitted half. The engine is nearly ready to be fitted in! With all new head gasket an all new seals, bolts an gasket everywere. The rocker cover is goin to be red aswel!
[IMG][/IMG] [IMG][/IMG][IMG][/IMG]
[IMG][/IMG] [IMG][/IMG][IMG][/IMG]
Last edited by bull-turbo; 22-06-2014 at 09:07 PM.
#153
PassionFord Regular
Thread Starter
Hi guys been a while, been doing bits on the car just havent had time to update this. heres a pic of the bits i bought in national day an fordfair an great days they were! mostly from matt lewis! My engine an that is up mine in the conservatory along with box an spare crank! Nearly ready to fit just guna put the new uprated camshaft an pulleys on. Had a replica rs500 rear whale tail spoiler from fordfair. Got to get all parts fitted see if there ok as its goin in for a respray end of next month hopefully!!
Im having a garage built aswel so when its back from the bodyshop its going in there. Had some bits for a hydraulic clutch so when it all comes ill get a pic up.
[IMG][/IMG]
[IMG][/IMG]
Im having a garage built aswel so when its back from the bodyshop its going in there. Had some bits for a hydraulic clutch so when it all comes ill get a pic up.
[IMG][/IMG]
[IMG][/IMG]
#155
PassionFord Regular
Thread Starter
#156
PassionFord Regular
Thread Starter
Hi guys had a few more bits most parts ready for the hydro clutch, most bits fitted aswel i put 3mm stainless steel plates each side of the bulkhead aswel. My new AP 6paddle clutch kit i had for a bargain!!.I've got an ecos lower splitter thats going under my rs500 front one with struts to bumper also. The rs500 rear spoiler i got doesnt fit so shelf it will be lol. havent been able to do much as my garage is being built aswel.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]