lowmans new car:)ford focus rs mk1,number 2893:)video n vented bonnet update,page3
#44
I've found that life I needed.. It's HERE!!
Thread Starter
#47
I've found that life I needed.. It's HERE!!
Thread Starter
yeah the standard lights were supposed to get back on,i think it looks better,still the other ones doesnt look that bad i think..i think it gets a fresh look.
for the summer..i will most likely get other wheels for the car..like all my other cosworths through the years ive always had wheels that not everyone else has..so i am twisting my brain on what wheels to put onbut i have some pinpoints though
cheers for lookin mate
#48
I've found that life I needed.. It's HERE!!
Thread Starter
just another moood picture of my focus rs and my friends escort cosworth
cheers and merry christmas to you all
cheers and merry christmas to you all
#49
I've found that life I needed.. It's HERE!!
Thread Starter
heypeople
just wanted to bring you a little update
the focus is now stored away for the winter..and i polised the car,and had a cleanup inside and in engine bay before the "blanket" went on the car
and i also have got my hands on a factory brand new focus rs steering wheel..and im well chuffed with that.its gonna be a nice addition to the car since its allready quite mint overall
hope you enjoy the pics
finished polishing the car,and ready to get the cover on
just getting some fresh air in the car
and...i found out that the car has folding mirrors...hehe it took a while to find it out obviouslyquite handy when in storage
factory brand new original steering wheel
just wanted to bring you a little update
the focus is now stored away for the winter..and i polised the car,and had a cleanup inside and in engine bay before the "blanket" went on the car
and i also have got my hands on a factory brand new focus rs steering wheel..and im well chuffed with that.its gonna be a nice addition to the car since its allready quite mint overall
hope you enjoy the pics
finished polishing the car,and ready to get the cover on
just getting some fresh air in the car
and...i found out that the car has folding mirrors...hehe it took a while to find it out obviouslyquite handy when in storage
factory brand new original steering wheel
Last edited by lowman; 13-01-2013 at 12:02 PM.
#52
I've found that life I needed.. It's HERE!!
Thread Starter
hey people
its been a while..but ive got some more updates pretty soon..just gotta figure out the shitty new version of photobucket
cheers for looking
its been a while..but ive got some more updates pretty soon..just gotta figure out the shitty new version of photobucket
cheers for looking
#53
I've found that life I needed.. It's HERE!!
Thread Starter
hey
here it is...my LITTLE BIG update
as you can see from the pics...there is quite a lot of nerdy upgrades.
like uprated thermostat housing..new windscreenwasher switch with interval ,and a factory brand new steering wheel...aaand as you can see ..i had to clean up even on the clockspring(the airbag contact thingy)hehe...but.anyways...enjoy the picsmore to come pretty soon
first of all ...resirc dumvalve....to stop the car from stalling in towards junctions and stuff..that together with the Mil cheater on the rear lambda sensor...it runs perfect all the time..no stalling,no mil light..so its all goodbut one question..i think i maybe have mounted the dumpvalve the wrong way around...any suggestions?....i mounted it not like the standard setup on the cosworth..for some reason...but...suggestions please
here it is...my LITTLE BIG update
as you can see from the pics...there is quite a lot of nerdy upgrades.
like uprated thermostat housing..new windscreenwasher switch with interval ,and a factory brand new steering wheel...aaand as you can see ..i had to clean up even on the clockspring(the airbag contact thingy)hehe...but.anyways...enjoy the picsmore to come pretty soon
first of all ...resirc dumvalve....to stop the car from stalling in towards junctions and stuff..that together with the Mil cheater on the rear lambda sensor...it runs perfect all the time..no stalling,no mil light..so its all goodbut one question..i think i maybe have mounted the dumpvalve the wrong way around...any suggestions?....i mounted it not like the standard setup on the cosworth..for some reason...but...suggestions please
Last edited by lowman; 15-05-2013 at 07:23 PM.
#55
I've found that life I needed.. It's HERE!!
Thread Starter
#57
I've found that life I needed.. It's HERE!!
Thread Starter
the main reason i like the amber ones is because of the 3door sierra cosworth vibe...the other reason is that i think it looks more whole if you know what i mean...i mean..the rears has got amber repeaters...so i always thought it is weird havin different repeaters from front to back..
but these ive bought sucks..they started to show sign of not beeing waterproof...which bothers me..so now i have to get another set,,and this time in gonna go for ford ones..not aftermarket ones.
and im also gonna buy brand new white ones.
#58
I've found that life I needed.. It's HERE!!
Thread Starter
hey people
got some updates here
been changin the timing belt, upgraded water pump, got a pair of brand new front fog lights,and put on some new screws on the arch liners
ill let the pictures do the talkingcheers for looking
proper ford locking tools,
let it aaall out(coolant
and aaalways use the correct torque setting for every bolthere the brand new upgraded water pump
done
timed up
DONE
trying out some new gearbox oil.i like to change the oils alot to keep the insides mint
cleaaan
cleaning the KN airfilter with the proper cleaning kit from KN
and i do have the SMOKERS PACK
new srews..and new brackets for the abs sensors both sides of course
new fog lights
old screw
neeeewwwww screw
got some updates here
been changin the timing belt, upgraded water pump, got a pair of brand new front fog lights,and put on some new screws on the arch liners
ill let the pictures do the talkingcheers for looking
proper ford locking tools,
let it aaall out(coolant
and aaalways use the correct torque setting for every bolthere the brand new upgraded water pump
done
timed up
DONE
trying out some new gearbox oil.i like to change the oils alot to keep the insides mint
cleaaan
cleaning the KN airfilter with the proper cleaning kit from KN
and i do have the SMOKERS PACK
new srews..and new brackets for the abs sensors both sides of course
new fog lights
old screw
neeeewwwww screw
Last edited by lowman; 08-07-2013 at 11:58 PM.
#62
15K+ Super Poster!!
iTrader: (2)
Looking great as usual!
Get yourself one of these if you don't like the cigarette lighter.
http://www.ebay.co.uk/itm/New-GENUIN...item25764c0092
Get yourself one of these if you don't like the cigarette lighter.
http://www.ebay.co.uk/itm/New-GENUIN...item25764c0092
#63
I've found that life I needed.. It's HERE!!
Thread Starter
thank you very much Sticky, Glenn and Dave
Richie...i doo like the Smokers pack.i do smoke...actually in the car too,,but never withouth windows open and i never use the ash tray..so it actually does not smell smoke
i do have some more parts coming my way at some pointto early to reveal what and when
but again...thank you very much for kind wordsmakes me wanna keep doing what i do
cheers
Richie...i doo like the Smokers pack.i do smoke...actually in the car too,,but never withouth windows open and i never use the ash tray..so it actually does not smell smoke
i do have some more parts coming my way at some pointto early to reveal what and when
but again...thank you very much for kind wordsmakes me wanna keep doing what i do
cheers
#64
I've found that life I needed.. It's HERE!!
Thread Starter
hey people
here is some pictures from my buftying session last weekend.
cleaned my car all up underneath ..spent to days just cleaning the underside.
ill let the pictures speak for themselves.
ps" the sills are wet "looking"because ive cleaned them and had waxoil on them to keep the rust free
cheers..and enjoy the geeky pictures
here is some pictures from my buftying session last weekend.
cleaned my car all up underneath ..spent to days just cleaning the underside.
ill let the pictures speak for themselves.
ps" the sills are wet "looking"because ive cleaned them and had waxoil on them to keep the rust free
cheers..and enjoy the geeky pictures
#65
I've found that life I needed.. It's HERE!!
Thread Starter
Merry christmaaaas people
car is in winterstorage at the momenti do have some plans for the car for next season..just waiting to get some more space where the car is storedsome pics of the "makin the car ready to be put away for 6months!
Cheeers for looking
car is in winterstorage at the momenti do have some plans for the car for next season..just waiting to get some more space where the car is storedsome pics of the "makin the car ready to be put away for 6months!
Cheeers for looking
Last edited by lowman; 22-12-2013 at 01:51 PM.
#67
I've found that life I needed.. It's HERE!!
Thread Starter
well..its uprated in that sense that it has a one piece design,,or it is not two pieces that is molded together
usually it is the lower part of the thermostat housing that starts to leak in the seam...
this one i got..that you can order from http://www.carpartsexpress.co.uk/For...3-241-648-500/
is a one piece design,and will not start to leak like the standard ones do.
its originally an SVT part....american tuned focus.
ive seen the alloy type aswell..but did not want that kind of parts on my car.
Last edited by lowman; 22-12-2013 at 03:26 PM.
#69
Live long and prosper!!
iTrader: (1)
hey mate
well..its uprated in that sense that it has a one piece design,,or it is not two pieces that is molded together
usually it is the lower part of the thermostat housing that starts to leak in the seam...
this one i got..that you can order from http://www.carpartsexpress.co.uk/For...3-241-648-500/
is a one piece design,and will not start to leak like the standard ones do.
its originally an SVT part....american tuned focus.
ive seen the alloy type aswell..but did not want that kind of parts on my car.
well..its uprated in that sense that it has a one piece design,,or it is not two pieces that is molded together
usually it is the lower part of the thermostat housing that starts to leak in the seam...
this one i got..that you can order from http://www.carpartsexpress.co.uk/For...3-241-648-500/
is a one piece design,and will not start to leak like the standard ones do.
its originally an SVT part....american tuned focus.
ive seen the alloy type aswell..but did not want that kind of parts on my car.
#74
I've found that life I needed.. It's HERE!!
Thread Starter
#75
I've found that life I needed.. It's HERE!!
Thread Starter
i borrowed some locking tools from ford..but if i recall correctly..i did not need the crank tool, as the crank pulley was NOT loose on the crank...there was the groove in the crank with the "locking halfmoon" in it..so i just made shure the timing was correct by checking the top dead centre.
and yes..i loosend the cam pulleys as well..that is quite essential when timing the timing belt.
Last edited by lowman; 27-12-2013 at 12:06 AM.
#79
I've found that life I needed.. It's HERE!!
Thread Starter