32K Miles Moonstone 2WD Sapphire Cosworth *** Update *** (17-2-13)
07-02-2012, 07:22 PM
#1
Advanced PassionFord User
Thread Starter
32K Miles Moonstone 2WD Sapphire Cosworth *** Update *** (17-2-13)
Thought i would start a thread about my sapph totally mint 32k miles never welded and zero rust, as i make some changes and progress of the car etc!!
The car has always been maintained By Karl @ NMS who also live mapped the car T34 & Grey's and AP'S up front & Avo coilovers and fully poly bushed it really is the best pulling and driving Cosworth i have owned and i have owned a few over the years! really is a testament to Karl @ NMS Mapping
I have just detailed the car and thought i would add some pics
The car has had the full Zaino treatment and have been really impressed but thought i would try something a bit different and go for 2 coats of Jetseal 109 then 2 coats of Dodo juice Banana armour and topped off with Zaino z2 pro then Zaino Z8 seal and i'm really liking the finish
Here s a few pics thoughout the correction and to be fair the car was near perfect to begin with just a few light marrings to correct from car cover wheres it been in garage stored over winter
Heres the pics :thumb:
The car has always been maintained By Karl @ NMS who also live mapped the car T34 & Grey's and AP'S up front & Avo coilovers and fully poly bushed it really is the best pulling and driving Cosworth i have owned and i have owned a few over the years! really is a testament to Karl @ NMS Mapping
I have just detailed the car and thought i would add some pics
The car has had the full Zaino treatment and have been really impressed but thought i would try something a bit different and go for 2 coats of Jetseal 109 then 2 coats of Dodo juice Banana armour and topped off with Zaino z2 pro then Zaino Z8 seal and i'm really liking the finish
Here s a few pics thoughout the correction and to be fair the car was near perfect to begin with just a few light marrings to correct from car cover wheres it been in garage stored over winter
Heres the pics :thumb:
Last edited by Tarren; 17-02-2013 at 09:22 PM.
07-02-2012, 07:50 PM
#4
Advanced PassionFord User
Thread Starter
Rs 4 Steering wheel on 
Have to get the alloys refurbed as the front two have slight curb rash but it really annoying me as i am anal
oh and cambelt and tensioner changed, managed to get genuine bits from Matt Lewis top bloke is Matt
Have to get the alloys refurbed as the front two have slight curb rash but it really annoying me as i am anal
oh and cambelt and tensioner changed, managed to get genuine bits from Matt Lewis top bloke is Matt
Last edited by Tarren; 24-04-2014 at 12:19 PM.
Trending Topics
07-02-2012, 09:44 PM
#14
Advanced PassionFord User
Thread Starter
07-02-2012, 09:47 PM
#15
Too many posts.. I need a life!!
Join Date: May 2011
Location: chester cheshire
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
07-02-2012, 09:51 PM
#16
Advanced PassionFord User
Thread Starter
No mate didn't need to use 3M fast cut plus as the paint was really good and just didn't need it
My advice is use the 3M pads also they are colour coded to the tops of the bottles and again are awesome
07-02-2012, 09:53 PM
#17
Too many posts.. I need a life!!
Join Date: May 2011
Location: chester cheshire
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
07-02-2012, 10:06 PM
#18
Too many posts.. I need a life!!
Join Date: May 2011
Location: chester cheshire
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
07-02-2012, 10:12 PM
#19
Advanced PassionFord User
Thread Starter
07-02-2012, 10:14 PM
#20
Too many posts.. I need a life!!
Join Date: May 2011
Location: chester cheshire
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
10-02-2012, 11:00 PM
#30
Advanced PassionFord User
Thread Starter
It's been freezing but thought i would go down to garage to do a few bits oh and i finally managed to get some new OZ centre caps, what a nightmare that was. Had to come from OZ racing Head quaters in Italy
Old ones here............
and the new ones...............
I also took off the strut brace to give it the bufty treatment at home in the warm, took a few berfore and after pics came up superb i think
Old ones here............
and the new ones...............
I also took off the strut brace to give it the bufty treatment at home in the warm, took a few berfore and after pics came up superb i think
Last edited by Tarren; 24-04-2014 at 12:20 PM.
12-02-2012, 07:52 PM
#38
Advanced PassionFord User
Thread Starter
12-02-2012, 07:54 PM
#39
Advanced PassionFord User
Thread Starter
18-02-2012, 03:57 PM
#40
Advanced PassionFord User
Thread Starter
Right small update!!!!!!!!!!!!!!
Matt Lewis is the man
super fast delivery as always new cambelt and tensioner and all aux belts fitted!!
For piece of mind all new sensors too lol!! plus group A coil
Few pics of bits and engine
Matt Lewis is the man
super fast delivery as always new cambelt and tensioner and all aux belts fitted!!For piece of mind all new sensors too lol!! plus group A coil
Few pics of bits and engine
Last edited by Tarren; 24-04-2014 at 12:20 PM.