P100 Project RS100 Cosworth Pic Heavy - Updated 04.05.16
09-02-2013, 05:15 PM
#161
The cab is painted and now home.
Work tomorrow
I wanted to start fitting it up.
Also done is the front bumper, vents, mirrors and some other bits and pieces.
NEED SOME TIME OFF WORK!
Massive thanks goes out to Joffy who spotted and bought me a side of arches and had them posted 
Thanks a bunch matey, money is on its way
Work tomorrow
I wanted to start fitting it up. Also done is the front bumper, vents, mirrors and some other bits and pieces.
NEED SOME TIME OFF WORK!
Massive thanks goes out to Joffy who spotted and bought me a side of arches and had them posted Thanks a bunch matey, money is on its way
Last edited by DixieTheKid; 09-02-2013 at 05:38 PM.
11-02-2013, 07:30 PM
#164
Lucifer II - 666
Mint!!!
17-02-2013, 03:47 PM
#173
Got the old girl back this week, yes thats me with the pikey riggers on!
Started to fit it up
The loom is from a saph 4x4 cos, so i've still got to cut out the rear e/w, c/l etc. Still have the ASB and engine loom to go in. Getting there now, head went off today for the valves to be put in, polished up and snapped exhaust stud to be drilled out.
Nearly there now, alarm and immobilizer to go in next so i can then finish up the interior install.
Need a 3 dr, door open warning thing and a 3dr elecie window switch as the ones i have are from a saph.
Started to fit it up
The loom is from a saph 4x4 cos, so i've still got to cut out the rear e/w, c/l etc. Still have the ASB and engine loom to go in. Getting there now, head went off today for the valves to be put in, polished up and snapped exhaust stud to be drilled out.
Nearly there now, alarm and immobilizer to go in next so i can then finish up the interior install.
Need a 3 dr, door open warning thing and a 3dr elecie window switch as the ones i have are from a saph.
18-02-2013, 06:56 PM
#177
Advanced PassionFord User
Fair play to you chris shes looking sweet 
27-02-2013, 09:21 PM
#186
Ive got to get a grill rubber trim and fit the grill first and then the arches so i know its bang on. Also got an fiberglass RS500 splitter to go on there.
02-04-2013, 05:38 PM
#200
Right then boys, as ive had some time off work and over easter ive done some work on the P100.
All looms are now in and mainly all hooked up, a few little ball aches during the way but nothing major. Because i bought the looms nothing was labeled but it was pretty straight foward. A few plugs need sorting out but im sure it will become clear in time.
Ill wait until the engine and engine loom are in before i tidy up the loom and put the rest of the trim in. Just in case.
I had to find a mk1 bulk head panel and some new grill brackets which i gave a clean up and a quick spray up.
Wanted to tidy up the loom in the bay today but ran out of time because i
decided to fit up this lot Bumper was an ass to get right.
Just need to dream up a way to pull the sides of the bumper in as the saph inner wings different. Need to drill some big holes!
Next is to get the running gear painted (or powder coated) and the arches of to the paint shop.
All looms are now in and mainly all hooked up, a few little ball aches during the way but nothing major. Because i bought the looms nothing was labeled but it was pretty straight foward. A few plugs need sorting out but im sure it will become clear in time.
Ill wait until the engine and engine loom are in before i tidy up the loom and put the rest of the trim in. Just in case.
I had to find a mk1 bulk head panel and some new grill brackets which i gave a clean up and a quick spray up.
Wanted to tidy up the loom in the bay today but ran out of time because i
decided to fit up this lot
Bumper was an ass to get right.Just need to dream up a way to pull the sides of the bumper in as the saph inner wings different. Need to drill some big holes!
Next is to get the running gear painted (or powder coated) and the arches of to the paint shop.
Last edited by DixieTheKid; 02-04-2013 at 05:40 PM.
