nevsrevs

no we got some sorted out for now, just raided the parts bin, we have just wired and pipped the boost controller up, happy days its not far off now,

jonfoc

looks great pal. I'm sorting a tubular front end for mine, saves a shed load of weight binning the crash bar

nevsrevs

yea they are heavy and the way they are made takes up so much room, just make sure its still strong enough to tie the legs together, the headlight brackets are way to big too, its so much nicer now we have got rid or them, wheres your thread then?

jonfoc

Getting all the things in place and once the car is at GR I'll start the pics and a thread. fancy making me a couple of headlight brackets?

nevsrevs

give yourself a day on the welder mate and get them done, they where a pain to make, here are some pics of tonights goodies,




cheers

jonfoc

Nice nice. I'm running a racetech dash as it links to my management.

nevsrevs

yea we have gone with good old acewell, cheap as chips, but does the job,

robman111

where abouts in somerset are you from mate?

nevsrevs

shepton/wells,

robman111

Not far from me then. if you are interested in that crank then you can have a look at it if your in the area.

dingla rs

iTrader: (2)

i just did a gizzmo centre console for me mate

nevsrevs

yea thats smart, for the money you cant complain, they are getting good reviews too, fingers crossed.

dingla rs

iTrader: (2)

Yer they must be good as most the frs boys
Have them. Cars coming on quite well now
Keep it up

nevsrevs

cheers the weekend here, so time to crack on, we need to get it runnind asap.

nevsrevs

we done this today, getting wires sorted now, rad and fan is all in now, its all looking good now, happy days,





rear window is done and in, likes get popping, cheers guys xxx

nevsrevs

should be getting it mapped within the next 2 weeks fingers crossed. hope it all holds together, lets pray for a nice spring/summer for some good track action....

robp-tt

iTrader: (1)

Thata great news about getting it mapped will you be taking it to any shows this year?

nevsrevs

not to sure yet rob, it all depends on wats being offered on track time, we are normanly at rs combe every year, cant wait to get it set up on the track, got alot of fine tuning to do yet,

nevsrevs

hi guys little update, we got our down pipe and boost pipes all done now, just waiting sor our silencer, and jobs a goodun, we went for the hall sensor for our speedo in the end, giving me a headache trying to rig it up to our mtx spped sensor, few days work left now, cheers.

Dicko&Vacant

iTrader: (3)

Looking good mate it's all coming together now

Who is going to be mapping it?

nevsrevs

friend of mine who does alot of stuff with omex is going to be doing it, looking forward to seeing all our hard work paying off, its been a busy year of working on the car as much as poss, but from start to finish in 14 months we are chuffed.

nevsrevs

pretty much got it all done now, all plumbed up, got fluids in, most of the dash is wired up, just got to get it booked in on the rollers now, for a days running in/mapping,

nevsrevs

does any one know on the focus fuel sender what wire does what, there is two and our dash only reads off 1 wire, any ideas would help, cheers guy,

Straight_4_N/a

lovs it

what internal loom you using? year and engine size...

nevsrevs

its a 2001 1.6 loom, whats left of it anyhows, cheers

Straight_4_N/a

lol 2001s where thay changed it but if its mk1 its brown/red wire

nevsrevs

brown and red is sig, so the other must be earth then i guess?

nevsrevs

this is our home grown heat shield, you got to love the motorsport cable ties.


still need to get my head round the fuel sender wires?

Straight_4_N/a

i checked my mk1.5 (it has the 1.6 loom at the min) and its brown/red from the tank to the dash

nevsrevs

sorted it now cheers bud, brown/red is sig red/white is earth, but it will work either way, got it rigged uup to dash now and all set up, its pretty trick really,

Rollinz

I have some metal tie wraps we use at work, can send you a couple if you need?

Andy Tucker

some damm fine work there mate

nevsrevs

cheers lads, just playing the waiting game to get it on the rollers now,

cheers for the offer rollinz, we will see how we get on with the plastic 1,s for now, if they melt then i will give you a shout, top man.

nevsrevs

and god said let there be light....... so we wired the fuckers up, time to start seeing some of these digits moving me thinks

smitsturbo

Looks stunning with good work

nevsrevs

cheers chap

cossyking

nice work mate take it we can have some battles at coombe this year then as looks nearly ready

Rollinz

Who's doing the mapping mate?

nevsrevs

yea we should be doing the 30th of april, would like to get out before for a shake down, but it all depends on that, what car ill you be in? how is the fiesta coming on?

nevsrevs

mate of mine does alot of work on omex stuff so he going to give it bash, lets hope it does not hole the block, lol