3 door rep build little update 21/2/12
#81
I've found that life I needed.. It's HERE!!
Thread Starter
have a look at this beef. none of them have seen or know anythink about the car lol
PAGE SLATING MY CAR ON FACE BOOK
http://www.facebook.com/#!/groups/200067366736997/
PAGE SLATING MY CAR ON FACE BOOK
http://www.facebook.com/#!/groups/200067366736997/
Last edited by scoobypete; 16-02-2012 at 11:00 PM.
#83
I've found that life I needed.. It's HERE!!
Thread Starter
#87
I've found that life I needed.. It's HERE!!
Thread Starter
ahemmm yr the one that tried selling them to me ages ago lol,
u need to swap some bits of mine so i can have the rear end of the donor
u need to swap some bits of mine so i can have the rear end of the donor
#88
PassionFord Post Whore!!
seriously wtf is that facebook page about? best thing you can do mate is ignore it they seem to like winding you up so don't post on it? personally i love this car
#89
I've found that life I needed.. It's HERE!!
Thread Starter
and thankyou very much, im very happy with it aswell
#91
Fixing Fords
iTrader: (1)
Nice update Pete looking good mate, that's persil white lol and you know what I think about FAGBOOK . Near the end now, keep up the good work mate summer is only just round the corner.
Still got my standard rims Ran I would lend em ya but I reckon you would smoke them out lol only kidding mate, if you need loan of a set
Hocks are my fav too, gotta keep looking for a set pete ,I will keep an eye out for you.
Still got my standard rims Ran I would lend em ya but I reckon you would smoke them out lol only kidding mate, if you need loan of a set
Hocks are my fav too, gotta keep looking for a set pete ,I will keep an eye out for you.
#92
PassionFord Post Whore!!
Keep up the good work mate, looking good.
Nice to see a Cossie being built, whether its genuine or a replica.
Always good to see.
We all share the enthusiasm, good luck with the build mate
Nice to see a Cossie being built, whether its genuine or a replica.
Always good to see.
We all share the enthusiasm, good luck with the build mate
#93
Too many posts.. I need a life!!
Pete you say your not bothered about the facebook page why then post the link up on here ?
And guys the page was set up not to slag the car off but the fact pete liked to talk utter crap back in the day, which he still does now so has got a reputaion for it, especailly about his cars and what he is gonna do to them, and not listening to decent advise when he asks for it.
The guy who started the page has got more tuned motors of one sort of another than most will ever have, as even I have lost count how many he has now, and its not me before you lot think im the one behing the facebook page.
And guys the page was set up not to slag the car off but the fact pete liked to talk utter crap back in the day, which he still does now so has got a reputaion for it, especailly about his cars and what he is gonna do to them, and not listening to decent advise when he asks for it.
The guy who started the page has got more tuned motors of one sort of another than most will ever have, as even I have lost count how many he has now, and its not me before you lot think im the one behing the facebook page.
#95
Advanced PassionFord User
glad you have updated this mate,looks the part now
i was thinking of selling my 3dr rep as have 3 projects on the go but seeing this i cant do it,i want mine to look as good as yours.
i was thinking of selling my 3dr rep as have 3 projects on the go but seeing this i cant do it,i want mine to look as good as yours.
#97
I've found that life I needed.. It's HERE!!
Thread Starter
thanks guys its getting there.just carnt wait to get it out in the summer.
rapid: do you have any piks or your rep?
no compo compaird to your animal ade lol. what you mean by that last post btw?
rapid: do you have any piks or your rep?
no compo compaird to your animal ade lol. what you mean by that last post btw?
#98
Professional Waffler
iTrader: (6)
Pete, its looking good mate - i will also keep an eye out for a set of Hocks for ya.
Ade - i have 5 std cossie wheels which need refurbing but like an idiot i sold the 3 locks i had they also wont fit over the front brakes i have for the 3dr
Pete - at this rate my 3dr will get finished before yours hits the road.
Ade - i have 5 std cossie wheels which need refurbing but like an idiot i sold the 3 locks i had they also wont fit over the front brakes i have for the 3dr
Pete - at this rate my 3dr will get finished before yours hits the road.
#99
I've found that life I needed.. It's HERE!!
Thread Starter
#101
I've found that life I needed.. It's HERE!!
Thread Starter
I'll let u know. I've had someone offer me one without diff for one of my old boxes. So may be intrestid in just diff??
#102
Advanced PassionFord User
mines in a state atm,haven't done owt to it for ages
the only pic i got with some bits on,its outside undercover now so cant get anymore.
would love it to look as good as yours.
the only pic i got with some bits on,its outside undercover now so cant get anymore.
would love it to look as good as yours.
#103
I've found that life I needed.. It's HERE!!
Thread Starter
That looks cool. You going to redo it black? If u want it all spraying let me know. I paid around 700 for the whole job and could put you in contact with him. Is it going to be a road or track car?
#104
Advanced PassionFord User
cheers mate,its not black,thats just the new wings i put on,the car is blue but not sure what colour to have,was going to be white,i did paint it all underneath white but i like all the colours, its along way off paint tho,i want to get abetter front bumper & need work on the drivers door etc
that paint job seems cheap,good finish to,when i get near the time mate ill pm you etc,cant say when tho lol
mines just going to be a road car although the thought of two buckets & a roll cage is mint
that paint job seems cheap,good finish to,when i get near the time mate ill pm you etc,cant say when tho lol
mines just going to be a road car although the thought of two buckets & a roll cage is mint
#105
I've found that life I needed.. It's HERE!!
Thread Starter
no keep it road, will be nicer to use.if you do decide to sell it let me know please and i would love to do another one after this but in black
#108
I've found that life I needed.. It's HERE!!
Thread Starter
well yeaterday i got hur out give gur a good wash and pollish
then today got my clips through for my fogs so finaly got to fit those and my smoked indicators. there not on a switch, just come on with the full beam for the time
then today got my clips through for my fogs so finaly got to fit those and my smoked indicators. there not on a switch, just come on with the full beam for the time
#110
I've found that life I needed.. It's HERE!!
Thread Starter
i did get some work done on them and the rust that was there was treated. i wanted to put new arches is but couldnt find any and the quotes i was getting to replace them i just couldnt afford. they are solid now altho they dont look amasing if you remove the arch
#112
Advanced PassionFord User
Originally Posted by scoobypete;5814640
[IMG
[IMG
http://i66.photobucket.com/albums/h258/fiesta-si-boy/de26565f.jpg[/IMG]
what running gear have you used pete as the wheel sits odd in these pics imo,seems to sit in at the top to far if you get what i mean?
is it got scorpio tca's?
#114
I've found that life I needed.. It's HERE!!
Thread Starter
ive got a 4x4 steering rack and x member then 2wd hubs arb and lower arms. i donk know of another way of doing it but i know what you mean. im realy strggling to get the tracking right aswell
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
26-04-2021 12:09 PM
Focosmitch
Ford Focus RS Parts for Sale.
5
09-03-2016 01:03 PM
Focosmitch
Ford RS Cosworth Parts for Sale
5
03-11-2015 04:08 PM