2.1zvh 6 speed mk3 track car ,NOW IN PAINT
#1
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
2.1zvh 6 speed mk3 track car ,NOW IN PAINT
hi all my name is Graham or Rsturbowhite and i thort it mite be a good idear to make a thread on hear , some of u mite already no me and some of u mite of seen me around on the ford seen in the car in me sig
one day back in 2006 i was scrap yard hunting like we all do !! and i went in to local scrap yard to find this gold mk3 1.3 escort sat on the deck with no wheels on , ready to be plonked on the scrap heap at the back off the yard ,so off i went to investergate it , after 5mins off lookin around it as the car was very clean on top , i went looking for the owner off the yard to come lift it up with the fork truck as i wanted to see underneth ,so the forks lifted the car up and a couldnt beleve how clean the car was ,so after agreing on a price off £100 pounds for the car , put some wheels on it ther and then and phoned the local recovery matey to come pick it up asap for me , after geting it home it was time to strip the car so that i could have a better look at the shell and this is how it looked
one day back in 2006 i was scrap yard hunting like we all do !! and i went in to local scrap yard to find this gold mk3 1.3 escort sat on the deck with no wheels on , ready to be plonked on the scrap heap at the back off the yard ,so off i went to investergate it , after 5mins off lookin around it as the car was very clean on top , i went looking for the owner off the yard to come lift it up with the fork truck as i wanted to see underneth ,so the forks lifted the car up and a couldnt beleve how clean the car was ,so after agreing on a price off £100 pounds for the car , put some wheels on it ther and then and phoned the local recovery matey to come pick it up asap for me , after geting it home it was time to strip the car so that i could have a better look at the shell and this is how it looked
Last edited by rsturbowhite; 07-03-2011 at 12:50 AM. Reason: Better name
#11
Regular Contributor
Join Date: Jan 2009
Location: in the unit - middlesbrough
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
#15
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Want'n to start at the begin Dicko be nice to get peoples feed back on the work that has gone in to it even tho it hasn't been all my work !!! Seems that there is already a couple haven digs at each other even tho there on the same team ???
#20
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully the will be dun now and we can get back to wot the thread started out to be ...!! A in site to the car that has taken so long to get were it is today
#22
sit boo boo sit
iTrader: (4)
Daz a have plenty of pic's fella when the bitch'n stops bitch'n each other a will be able to get down to wot the thread was started for....!
Hopefully the will be dun now and we can get back to wot the thread started out to be ...!! A in site to the car that has taken so long to get were it is today
Hopefully the will be dun now and we can get back to wot the thread started out to be ...!! A in site to the car that has taken so long to get were it is today
Any luck with those wheels you were after last week
#24
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
It's a open board fella just seem to me that beefy fines his fun from winding spesh up on here even tho spech has gone out his way to make his car the way it is ...!!! A carnt make me mind up for the wheels Daz ..
#27
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Some more pic.s of the rot and the shell been seam welded up by spesh ...!
[IMG]
Will post more later today
[IMG]
Will post more later today
Last edited by rsturbowhite; 26-02-2011 at 02:27 PM.
#28
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
#30
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
#33
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
#35
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
After the body work was sorted out speech and me self made a start on make'n the cage !!
So of we when't to the hire shop to get a pipe bender and the over to pick up some 5meter seamless tube to do the job . After a odd couple off try,s on a spare bit of pipe it was time to have ago for real on the car so wot do u think
Note the door bars have my added tough to them with a drop in as am no slim jim
So of we when't to the hire shop to get a pipe bender and the over to pick up some 5meter seamless tube to do the job . After a odd couple off try,s on a spare bit of pipe it was time to have ago for real on the car so wot do u think
Note the door bars have my added tough to them with a drop in as am no slim jim
Last edited by rsturbowhite; 26-02-2011 at 02:13 PM.
#38
I've found that life I needed.. It's HERE!!
lovely graham
i don't think i've seen some of those pics, you guys take on what a lot of people couldn't even contemplate...
well planned, and very well executed, fab work is impeccable guys, well done.
i don't think i've seen some of those pics, you guys take on what a lot of people couldn't even contemplate...
well planned, and very well executed, fab work is impeccable guys, well done.
#39
PassionFord Regular
Thread Starter
Join Date: Jun 2005
Location: guisborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the coments lads more pic,s to follow