moonstone 3dr small update
23-05-2015, 08:35 PM
#963
got a couple of jobs out of the way today,got the new hose on the washer jets and got the scuttle panel fitted.
got the new headlights and grill fitted up,hopefully for the last time,these fit so much better now the old 500 cooler has been replaced with a top feed cooler.
had this nut made by mk motorsport as I wasn't keen on the plastic one.
looking into the problem im having with the power steering looks like the rack has to be removed and sent away for inspection ill update once its been looked at,hopefully they find something wrong because I haven't a clue whats going on with it.
on another note a couple of weeks back while I was at NMS with mike we decided to drive another 3 hours south to Essex to have my spare block long studded and have the machining done for oil jets,looking at having it built up for a spare,but this wont happen quickly I just don't have the funds atm for new crank,rods and pistons.
got the new headlights and grill fitted up,hopefully for the last time,these fit so much better now the old 500 cooler has been replaced with a top feed cooler.
had this nut made by mk motorsport as I wasn't keen on the plastic one.
looking into the problem im having with the power steering looks like the rack has to be removed and sent away for inspection ill update once its been looked at,hopefully they find something wrong because I haven't a clue whats going on with it.
on another note a couple of weeks back while I was at NMS with mike we decided to drive another 3 hours south to Essex to have my spare block long studded and have the machining done for oil jets,looking at having it built up for a spare,but this wont happen quickly I just don't have the funds atm for new crank,rods and pistons.
25-05-2015, 05:49 AM
#966
I can't drive it yet Chris due the problem with the power steering,what sort of noise is it making and can you actually reverse the car?
14-06-2015, 11:37 AM
#970
very small update,couple of small jobs done.
l8 bracket fitted and ecu installed.
new wiper blades and gave the arms a lick of paint.
managed to source a spare wheel that fits over the AP'S
oh and after a 14 months wait the filter for my catch tank turns up from SPEC-R
l8 bracket fitted and ecu installed.
new wiper blades and gave the arms a lick of paint.
managed to source a spare wheel that fits over the AP'S
oh and after a 14 months wait the filter for my catch tank turns up from SPEC-R
The following users liked this post:
cozzy jeff (14-06-2015)
14-06-2015, 06:42 PM
#977
cossie fan (unluckerly)
14-06-2015, 07:06 PM
#978
james tbh mate I don't know what an alternative could be pete owns the tooling rights to that filter
I did try to get one direct from k and n and they told me I can only get them through pete.it must have cost me more in texts and phone calls chasing this up than it did for the whole catch tank
he told me on two occasions that these where special order from America when it turned up it had a sticker on it saying made in England lol.
I hate being lied to.
I did try to get one direct from k and n and they told me I can only get them through pete.it must have cost me more in texts and phone calls chasing this up than it did for the whole catch tank
he told me on two occasions that these where special order from America when it turned up it had a sticker on it saying made in England lol.
I hate being lied to.
15-06-2015, 07:45 PM
#980
cossie fan (unluckerly)
15-06-2015, 08:49 PM
#981
It won't be out this year mate,I'm having electrical issues atm which has got me baffled,don't have much left to do tbh,wire in lambda sensor install dash when it comes back,gauges, lower boot spoiler and set the front coilovers I'll get it mot's and tracking done early next year.
20-06-2015, 11:21 AM
#982
He must be a genuine bellend, when you pay for a service and parts to be made and get your time for said parts to be complete then have to wait over 12 months and phone call, bullshit, phone call, more bullshit over and over again its a pure pisstake.
This maybe something southerns are used to but up here when you say you'll do something and you don't it doesn't go down well, i've heard a few folk say if he doesn't sort the parts out they are going to be basically hammer him as he's a piss taker.
This maybe something southerns are used to but up here when you say you'll do something and you don't it doesn't go down well, i've heard a few folk say if he doesn't sort the parts out they are going to be basically hammer him as he's a piss taker.
20-06-2015, 12:25 PM
#983
cossie fan (unluckerly)
He must be a genuine bellend, when you pay for a service and parts to be made and get your time for said parts to be complete then have to wait over 12 months and phone call, bullshit, phone call, more bullshit over and over again its a pure pisstake.
This maybe something southerns are used to but up here when you say you'll do something and you don't it doesn't go down well, i've heard a few folk say if he doesn't sort the parts out they are going to be basically hammer him as he's a piss taker.
This maybe something southerns are used to but up here when you say you'll do something and you don't it doesn't go down well, i've heard a few folk say if he doesn't sort the parts out they are going to be basically hammer him as he's a piss taker.
20-06-2015, 02:35 PM
#985
I don't have anything against southerners in general 
but some of the business technique is a little different than what i'm used to - when you say it will be done you go out of way to stand by your word not blag it for an extra year lol but he's not alone. He makes parts equal to the next good fabricator i've got his tanks so know the workmanship
but some of the business technique is a little different than what i'm used to - when you say it will be done you go out of way to stand by your word not blag it for an extra year lol but he's not alone. He makes parts equal to the next good fabricator i've got his tanks so know the workmanship
20-06-2015, 04:39 PM
#986
That in itself is bollocks to Take MK he was sending me a diff strengthening plate 4 months ago it aint turning up it never will because thats how he is Im just glad he said have a look at it then pay for it and I m not the first to have this from him so is it because he is a useless lying northern person or is it because his personal word means fuck all !
But nice racist rant there Chris
But nice racist rant there Chris
20-06-2015, 06:59 PM
#988
That in itself is bollocks to Take MK he was sending me a diff strengthening plate 4 months ago it aint turning up it never will because thats how he is Im just glad he said have a look at it then pay for it and I m not the first to have this from him so is it because he is a useless lying northern person or is it because his personal word means fuck all !
But nice racist rant there Chris
But nice racist rant there Chris
is that coz your a lying southerner or your word means nothing
and what has this thread got to do with mean NOTHING
20-06-2015, 07:35 PM
#991
Either send me a pm if want to cry some more or dont bother at all its all good
20-06-2015, 07:39 PM
#993
Last word on this I did tell you and why did I not follow up the call is because there has been so many complain about your service and time schedules and I can not believe its purely because your a northern person that I decided to buy it from Burtons who actually do what they say lol
Either send me a pm if want to cry some more or dont bother at all its all good
Either send me a pm if want to cry some more or dont bother at all its all good
pm me your number
20-06-2015, 07:59 PM
#995
Facts to think about
You northerner +
pete southener
Both got useless businesses ethics = doesnt matter where your from ethics dont change
My point was it dont matter where your from Glad your sorted now though kid although Pete should of fully refunded you on top of suppling bits as a damage limitation exercise and because the piss was taken lol
20-06-2015, 08:28 PM
#996
Fuck for ? dont want or need to talk or buy from you
Facts to think about
You northerner +
pete southener
Both got useless businesses ethics = doesnt matter where your from ethics dont change
No mate Chris didMy point was it dont matter where your from
Glad your sorted now though kid although Pete should of fully refunded you on top of suppling bits as a damage limitation exercise and because the piss was taken lol
Facts to think about
You northerner +
pete southener
Both got useless businesses ethics = doesnt matter where your from ethics dont change
No mate Chris did
My point was it dont matter where your from Glad your sorted now though kid although Pete should of fully refunded you on top of suppling bits as a damage limitation exercise and because the piss was taken lol
20-06-2015, 11:29 PM
#997
I've found that life I needed.. It's HERE!!
21-06-2015, 06:27 AM
#998
MK Motorsport where's he based up north - from memory it's a 4 hour drive south for me lol it wasn't a personal attack on southern folk it was purely Pete and his shit service.
ajamesc he isn't all that, because he makes a few bits for enthusiasts and race cars doesn't make him the best out there as said plenty of local folk actually make better gear for all different apps
ajamesc he isn't all that, because he makes a few bits for enthusiasts and race cars doesn't make him the best out there as said plenty of local folk actually make better gear for all different apps
