Alan12112 Fiesta mk6 turbo :P
03-05-2009, 11:01 PM
#1
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Alan12112 Fiesta mk6 turbo :P
Ok folks, alot of people on here have been asking me for quite some time to get a project thread up on here so here goes, it's gonna take me a while to get you upto speed so bare with me
03-05-2009, 11:03 PM
#2
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Ok peeps here goes - trying to find all the old pics of my fiesta so I can start from the beginning but i fear too many of my old mods have ben lost in cyberspace forever 
It all started 08/06/2004 Wit the last drive of my beloved (and still much missed mini)
The very next day I picked up my shiny new Fiesta 1.4 Flame in panther black!!
I was soo proud!! Didn't do anythin for it until my mrs bought me a set of st150 indicators
These made such a difference to the car I thought I wonder what difference some lexus lights would make?
Oh dear I can see now how terrible it looks but I was only 18 and I was young and nieve
Left it like this for a few months and saved up enough for some wheels!!
on the Car
As you can see it's a moon buggy so I had it lowered on some -45mm spax springs
It all started 08/06/2004 Wit the last drive of my beloved (and still much missed mini)
The very next day I picked up my shiny new Fiesta 1.4 Flame in panther black!!
I was soo proud!! Didn't do anythin for it until my mrs bought me a set of st150 indicators
These made such a difference to the car I thought I wonder what difference some lexus lights would make?
Oh dear I can see now how terrible it looks but I was only 18 and I was young and nieve
Left it like this for a few months and saved up enough for some wheels!!
on the Car
As you can see it's a moon buggy so I had it lowered on some -45mm spax springs
03-05-2009, 11:05 PM
#3
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Around this time I joined ukfn - got on with everyone and was a proud member -
My little fiesta was doin me proud I was meeting peeps all around my area theywere all sayin what a nice car i had! This was good but i'm never happy!!
So I decided to sort the sound situation out at Global Ice Wired - ended up with 2 x Components, 2 x Coaxials, A head unit, xbox, 2 amps and a boot build
New headunit
New speakers
A boot build
I spent far too much money on this but again I was nieve and thought I was gettin the best!
Had some custom sill plates made
Next was (and still is) one of my fav mods - Full St leather
I had my install tested out at al local cruise (warrington car warz) and found out it wasnt as loud as I had hoped!!
So back I went to G.I.W and spent even more money
Had some new subs, 2 power caps fitted and some led's in the foot wells and in the boot and another hidden amp to power the subs as my amps that are on show power the components ans the coaxials. So i now had 2 x Components, 2 x Coaxials, A head unit, xbox, 3 amps, 2 power caps and a boot build!
Had it tested and it hit
My little fiesta was doin me proud I was meeting peeps all around my area theywere all sayin what a nice car i had! This was good but i'm never happy!!
So I decided to sort the sound situation out at Global Ice Wired - ended up with 2 x Components, 2 x Coaxials, A head unit, xbox, 2 amps and a boot build
New headunit
New speakers
A boot build
I spent far too much money on this but again I was nieve and thought I was gettin the best!
Had some custom sill plates made
Next was (and still is) one of my fav mods - Full St leather
I had my install tested out at al local cruise (warrington car warz) and found out it wasnt as loud as I had hoped!!
So back I went to G.I.W and spent even more money
Had some new subs, 2 power caps fitted and some led's in the foot wells and in the boot and another hidden amp to power the subs as my amps that are on show power the components ans the coaxials. So i now had 2 x Components, 2 x Coaxials, A head unit, xbox, 3 amps, 2 power caps and a boot build!
Had it tested and it hit
03-05-2009, 11:08 PM
#4
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
I was so engrossed with UKFN that I decided to go to the BW3 meet - glad I did as I met quite a few friends there and I saw how much potential the fiesta has! And how far ahead my boot build was!! I'm sure my car was the loudest there!! :P
Got to BW3 and tried on the not yet available ultra lights and realised how bad my lexus lights were!
When I returned home I decided to buy a bodykit!
Trail fitting
Also some focus Rs wheels of simhoppers car!!
The extra vigilant among you might have noticed my new grill - It was such a steal I couldnt say no!! lol
My headunit was stolen
So I decided to get even more power to my subs - I bought a new amp
Some proper wiring
And a really expensive new headunit (Sad face cos it cost me soo much)
This did the bis and it's alot louder now
Although i've never had it tested since so I dont know what is puttin out power wise
About this time another body kit was bought and subsequently sold
My wheels were looking abit tattered so decided to get some new ones!
Thats how she was for FITP 2006
I finally saw the light and changed back to my standard lights!!
^^ Much better ^^ :thumbsup:
Colour coding time!
Got to BW3 and tried on the not yet available ultra lights and realised how bad my lexus lights were!
When I returned home I decided to buy a bodykit!
Trail fitting
Also some focus Rs wheels of simhoppers car!!
The extra vigilant among you might have noticed my new grill - It was such a steal I couldnt say no!! lol
My headunit was stolen
So I decided to get even more power to my subs - I bought a new amp
Some proper wiring
And a really expensive new headunit
(Sad face cos it cost me soo much)This did the bis and it's alot louder now
Although i've never had it tested since so I dont know what is puttin out power wiseAbout this time another body kit was bought and subsequently sold
My wheels were looking abit tattered so decided to get some new ones!
Thats how she was for FITP 2006
I finally saw the light and changed back to my standard lights!!
^^ Much better ^^ :thumbsup:
Colour coding time!
Last edited by alan12112; 03-05-2009 at 11:10 PM.
03-05-2009, 11:13 PM
#5
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Got a nice little St spoiler
Fitted
I was happy for all of 10 mins as she now looked a little on the high side! I know she was no moon buggy anymore but I still wasn't happy
So I bought these
And they did this
I was much happier!!
Found some st leather door cards on ebay
Colour coded the interior
Fitted
I was happy for all of 10 mins as she now looked a little on the high side! I know she was no moon buggy anymore but I still wasn't happy
So I bought these
And they did this
I was much happier!!
Found some st leather door cards on ebay
Colour coded the interior
03-05-2009, 11:20 PM
#6
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Much better I thought!
Got me some black ford badges front rear and steering wheel!! Can't descibr how good the quality of service was from dmb grpahics but I have recommended them with a passion to anyone and everyone I know!!
That how she was when I went to santa pod!
[/url]
Video of me Vrs a 3 door!! lol
[/url]
I know it looks like I have missed gear or something but I didnt
How she ws at FITP 2007
My Mag Feature!!
I have just taken out the rear suspension cups to get my car even lower at the back
How she sits now
Thanx for reading - Next step - ST engine!! Watch this space!
Got me some black ford badges front rear and steering wheel!! Can't descibr how good the quality of service was from dmb grpahics but I have recommended them with a passion to anyone and everyone I know!!
That how she was when I went to santa pod!
[/url]Video of me Vrs a 3 door!! lol
[/url]I know it looks like I have missed gear or something but I didnt
How she ws at FITP 2007
My Mag Feature!!
I have just taken out the rear suspension cups to get my car even lower at the back
How she sits now
Thanx for reading - Next step - ST engine!! Watch this space!
03-05-2009, 11:22 PM
#7
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Few more pics of my headunit and how my car looks at night
I love how low my car looks in that last pic - looks just llike someone has put the back bumper on the ground!
I love how low my car looks in that last pic - looks just llike someone has put the back bumper on the ground!
Trending Topics
03-05-2009, 11:26 PM
#9
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Finally checked some boxes on my list - Some bargains I got at ford fair
Here they are!
Omp Strut Brace
A fiesta mk6.5 Zetec-s Steering wheel! Much more desireable for re-sale than the St one!
Here they are!
Omp Strut Brace
A fiesta mk6.5 Zetec-s Steering wheel! Much more desireable for re-sale than the St one!
03-05-2009, 11:27 PM
#10
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Just got back from Tim's - I've (he's) fitted my mk6.5zs steering wheel
Here's the man in question
Here's the finished product :thumbsup:
Very nice i'm sure you'll agree!!
Also fitted my colour coded washer jets and my ghia maplight thingy!
Here's the man in question
Here's the finished product :thumbsup:
Very nice i'm sure you'll agree!!
Also fitted my colour coded washer jets and my ghia maplight thingy!
03-05-2009, 11:29 PM
#11
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Conversion was started at this point here's the car with the rear bumper off the fiesta st
Last edited by alan12112; 03-05-2009 at 11:57 PM.
03-05-2009, 11:41 PM
#12
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
old engine out - bye bye 1.4!
St pedals!
Hello 2.0 power
Manifold and TB back on
K&N Induction kit Fitted
Pipework/Cables tidied up
And Miltec Exhaust Fitted
ST Clocks
A balancing act lol
Still alot to do but its getting there
Last edited by alan12112; 03-05-2009 at 11:55 PM.
04-05-2009, 12:01 AM
#13
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Car from the side with the rear bumper on!
The rear discs :thumbsup:
The front discs
2 pics of the engine in place and the second pic is now my desktop! I can't wait to pick her up now!
I have red magnacors on the way
The rear discs :thumbsup:
The front discs
2 pics of the engine in place and the second pic is now my desktop! I can't wait to pick her up now!
I have red magnacors on the way
04-05-2009, 12:10 AM
#15
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
This arrived from fleabay
So my engine bay went from this
To this
I'm very happy! Especially now i've just bought alot of bling
So my engine bay went from this
To this
I'm very happy! Especially now i've just bought alot of bling
Last edited by alan12112; 04-05-2009 at 12:13 AM.
04-05-2009, 12:12 AM
#16
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Just got the 1st piece of my engine bay bling last night!
Here are some pics (sorry for the quality they we're off my phone)
Header Tank Cover -
Fitted -
This was just a trial fitting as it needs to be polished before i'm happy with it!
I'll get some better pics when it's all polished up and I have the rest fitted (next few days I hope)
Can't believe the trouble i've had getting these off royal mail - but they finally arrived yesterday - they have yet to be put on the car but they look awesome!
All I need now is the chrome PAS tank cover and a samco hose for my induction kit and it's done (possibly some under bonnet mirrors)
Here are some pics (sorry for the quality they we're off my phone)
Header Tank Cover -
Fitted -
This was just a trial fitting as it needs to be polished before i'm happy with it!
I'll get some better pics when it's all polished up and I have the rest fitted (next few days I hope)
Can't believe the trouble i've had getting these off royal mail - but they finally arrived yesterday - they have yet to be put on the car but they look awesome!
All I need now is the chrome PAS tank cover and a samco hose for my induction kit and it's done (possibly some under bonnet mirrors)
Last edited by alan12112; 04-05-2009 at 12:17 AM.
04-05-2009, 12:23 AM
#19
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Car seemed really quick now but I still wanted more so out came the back seats and in went the cage
Treated my car to a new rad, an oil change, some new spark plugs and some sexy indution hose
Treated my car to a new rad, an oil change, some new spark plugs and some sexy indution hose
04-05-2009, 12:31 AM
#21
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
right another day, another mod for me
Finally fitted my chrome wing rail covers and i'm rather pleased with the outcome!!
Oh yeah and a bit of an arty shot of my engine!!
I really like that pic ^^
Everything has arrived - mirrors for the bonnet and a nice strut via Lo0n - cheers mate!!
Pics
BTW thats not fixed in place there I was just testing it! I fit it properly yesterday but didn't get any pics oops!
Mirrors
Cheers
Finally fitted my chrome wing rail covers and i'm rather pleased with the outcome!!
Oh yeah and a bit of an arty shot of my engine!!
I really like that pic ^^
Everything has arrived - mirrors for the bonnet and a nice strut via Lo0n - cheers mate!!
Pics
BTW thats not fixed in place there I was just testing it! I fit it properly yesterday but didn't get any pics oops!
Mirrors
Cheers
04-05-2009, 12:33 AM
#22
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
540 mile round trip to essex and back
But I'm glad I did!
Got my self a new gearbox with a lsd!! :thumbsup:
I can't believe the difference this has made to my car!
Here's a pic of my baby on the ramps
if you go for one mod to your car make sure it's this one - LSD's are awesome!!
You can carry so much more speed through a corner and it feels so much more planted on the road!!
But I'm glad I did!
Got my self a new gearbox with a lsd!! :thumbsup:
I can't believe the difference this has made to my car!
Here's a pic of my baby on the ramps
if you go for one mod to your car make sure it's this one - LSD's are awesome!!
You can carry so much more speed through a corner and it feels so much more planted on the road!!
04-05-2009, 12:34 AM
#23
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Right folks here goes I have taken the plunge and i'm going for the turbo conversion on my duratec!
I paid the deposit yesterday so there's no going back now!
Here's the kit :thumbsup:
* High flow performance cast turbo manifold
* TD04 13T Turbo charger
* Full front mount intercooler
* Stainless steel 2.5'' exhaust downpipe
* Oil feed pipe
* oil return pipe and adaptor to fit sump
* Oil pressure switch T-piece
* Performance air filter
* Turbo intake pipe
* All intercooler connection pipes with silicone hose joiners
* 39lb ford racing injectors
* Dump valve
* Spark plugs
* New gaskets
* Dreamscience X3 with turbo application program
* Stage 2 organic clutch 2 piece
* Labour to fit clutch and turbo kit
* Dyno session on our in house Mustang Dyno to finalise mapping of ECU
Obviously I already have the dreamscience and my car is going to be the 1st by this company so i'm getting it at a reasonable rate!
It goes in on July the 19th and I get it back the 2nd of August - the day before Ford Fair, I might be on the fast ford stand aswell
Here's what the kit looks like
I paid the deposit yesterday so there's no going back now!
Here's the kit :thumbsup:
* High flow performance cast turbo manifold
* TD04 13T Turbo charger
* Full front mount intercooler
* Stainless steel 2.5'' exhaust downpipe
* Oil feed pipe
* oil return pipe and adaptor to fit sump
* Oil pressure switch T-piece
* Performance air filter
* Turbo intake pipe
* All intercooler connection pipes with silicone hose joiners
* 39lb ford racing injectors
* Dump valve
* Spark plugs
* New gaskets
* Dreamscience X3 with turbo application program
* Stage 2 organic clutch 2 piece
* Labour to fit clutch and turbo kit
* Dyno session on our in house Mustang Dyno to finalise mapping of ECU
Obviously I already have the dreamscience and my car is going to be the 1st by this company so i'm getting it at a reasonable rate!
It goes in on July the 19th and I get it back the 2nd of August - the day before Ford Fair, I might be on the fast ford stand aswell
Here's what the kit looks like
Last edited by alan12112; 04-05-2009 at 12:36 AM.
04-05-2009, 12:42 AM
#24
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Conversion started by performance3000
The hoses will be red when this is done but they have used blue to mock up everything
engine bay almost looks factory apart from the big stainles induction hose - lol
NB the above is at the wheel horsepower!
The hoses will be red when this is done but they have used blue to mock up everything
engine bay almost looks factory apart from the big stainles induction hose - lol
NB the above is at the wheel horsepower!
Last edited by alan12112; 04-05-2009 at 12:49 AM.
04-05-2009, 12:50 AM
#25
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Here are some videos my mate took at ford fair 2008
http://www.youtube.com/watch?v=AO9sDLafP_4
http://www.youtube.com/watch?v=vPOmjUQvLjU
http://www.youtube.com/watch?v=I88DBgzWseQ
Hope you like!!
http://www.youtube.com/watch?v=AO9sDLafP_4
http://www.youtube.com/watch?v=vPOmjUQvLjU
http://www.youtube.com/watch?v=I88DBgzWseQ
Hope you like!!
Last edited by alan12112; 04-05-2009 at 12:52 AM.
04-05-2009, 12:59 AM
#29
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
had the fast for shoot last week but I can't get the pics he took as it's not been in the mag yet
I took a few myself of him snapping though
low shot
wheel details
high one
engine
I must have to say the level of detail these guys go to is phenominal!
and the shots he showed me there and then were awesome, especially the moving ones
I took a few myself of him snapping though
low shot
wheel details
high one
engine
I must have to say the level of detail these guys go to is phenominal!
and the shots he showed me there and then were awesome, especially the moving ones
04-05-2009, 01:01 AM
#30
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
04-05-2009, 01:16 AM
#32
Focus St mk2 310 bhp :D
Thread Starter
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Finally decided after much deliberation to get rid of the comps and go back to the cossie wheels and i'm very happy I have done!!
So thats it folks, thats you lot caught up on 4 years of me modding what has become a very special fiesta in my eyes, I hope you like it and have some thoughts of your own which i'd love to hear
So thats it folks, thats you lot caught up on 4 years of me modding what has become a very special fiesta in my eyes, I hope you like it and have some thoughts of your own which i'd love to hear
04-05-2009, 01:21 AM
#33
YES I KNOW I CANT SPELL
Join Date: Mar 2008
Location: chingford e4
Posts: 5,271
Likes: 0
Received 0 Likes
on
0 Posts
Finally decided after much deliberation to get rid of the comps and go back to the cossie wheels and i'm very happy I have done!!
So thats it folks, thats you lot caught up on 4 years of me modding what has become a very special fiesta in my eyes, I hope you like it and have some thoughts of your own which i'd love to hear
So thats it folks, thats you lot caught up on 4 years of me modding what has become a very special fiesta in my eyes, I hope you like it and have some thoughts of your own which i'd love to hear
