underside resto...
the finish on the g-box is amazin.
30-04-2010, 11:05 PM
#176
i keep thinkin about doing my mo,s in diamond white but really not sure
but this is a recent pic of mine and adams so you get the idea of anthracite will have to get some other pics up for you
Last edited by hitchwest; 30-04-2010 at 11:19 PM.
02-05-2010, 07:14 AM
#178
Parts Restoring Nutter
Hi Nels
Gearbox looks good matey. What paint did you use on it??
I should be able to start shipping back some of your parts early next week
Little taster
CheeRS
Chris
Passion Restoration Products
Gearbox looks good matey. What paint did you use on it??
I should be able to start shipping back some of your parts early next week
Little taster
CheeRS
Chris
Passion Restoration Products
02-05-2010, 07:29 PM
#181
Parts Restoring Nutter
It all depends on what parts need to be done and condition really matey.
Nels sent me 4-5 boxes of parts which all needed stripped down, degreased, blasted and powdercoated/wet painted.
All are complete and i will be sending him the pictures for him to use on this thread.
Please email me at chris@passionrestorationproducts.com if you require further info as i may get into trouble with mods if i start putting prices etc.
Kind regards
Chris
Last edited by Chris Latham; 02-05-2010 at 07:31 PM.
02-05-2010, 07:31 PM
#182
Parts Restoring Nutter
03-05-2010, 08:33 AM
#183
Hi Karl
It all depends on what parts need to be done and condition really matey.
Nels sent me 4-5 boxes of parts which all needed stripped down, degreased, blasted and powdercoated/wet painted.
All are complete and i will be sending him the pictures for him to use on this thread.
Please email me at chris@passionrestorationproducts.com if you require further info as i may get into trouble with mods if i start putting prices etc.
Kind regards
Chris
It all depends on what parts need to be done and condition really matey.
Nels sent me 4-5 boxes of parts which all needed stripped down, degreased, blasted and powdercoated/wet painted.
All are complete and i will be sending him the pictures for him to use on this thread.
Please email me at chris@passionrestorationproducts.com if you require further info as i may get into trouble with mods if i start putting prices etc.
Kind regards
Chris
Karl
29-05-2010, 08:05 AM
#196
Parts Restoring Nutter
Hi Nels
Glad everything turned up with you safe and sound
Hope everything is OK for you
I am just waiting for some manifold bolts and wiper mech bushes to turn up from Ford Germany, then i can assemble up your inlet manifold etc and get it sent on down to you
I have a vast range of "before and after" high resolution pics of your parts being done so will load them onto this thread over the weekend.
RS Stian: No, the fuel reg wasnt powder coated mate as i no about some sort of membrane inside it.
It was capped off, glass bead blasted, painted in Aluma Blast and laqured in satin diamond clear.
Kind regards
Chris @ PRP
Glad everything turned up with you safe and sound
Hope everything is OK for you
I am just waiting for some manifold bolts and wiper mech bushes to turn up from Ford Germany, then i can assemble up your inlet manifold etc and get it sent on down to you
I have a vast range of "before and after" high resolution pics of your parts being done so will load them onto this thread over the weekend.
RS Stian: No, the fuel reg wasnt powder coated mate as i no about some sort of membrane inside it.
It was capped off, glass bead blasted, painted in Aluma Blast and laqured in satin diamond clear.
Kind regards
Chris @ PRP
29-05-2010, 11:11 AM
#197
I've found that life I needed.. It's HERE!!
iTrader: (3)
Join Date: Oct 2007
Location: Kent
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
love the look of the power steering tank was that an ally one poder coated or the standard one painted. what wsa it painted/powder coated with?
top work by the way.
cheers,
Phil
top work by the way.
cheers,
Phil
29-05-2010, 01:56 PM
#198
Parts Restoring Nutter
The power steering tank is Nels original ford plastic tank.
I degreased it, panel wiped it down, primeed it, shot a coat of black textured finish onto it and then diamond cleared it in satin finish.
It was then topped off with a brand new genuine ford cap.
Cheers
Chris @ PRP
30-05-2010, 12:25 AM
#199
Hi Nels
Glad everything turned up with you safe and sound
Hope everything is OK for you
I am just waiting for some manifold bolts and wiper mech bushes to turn up from Ford Germany, then i can assemble up your inlet manifold etc and get it sent on down to you
I have a vast range of "before and after" high resolution pics of your parts being done so will load them onto this thread over the weekend.
RS Stian: No, the fuel reg wasnt powder coated mate as i no about some sort of membrane inside it.
It was capped off, glass bead blasted, painted in Aluma Blast and laqured in satin diamond clear.
Kind regards
Chris @ PRP
Glad everything turned up with you safe and sound
Hope everything is OK for you
I am just waiting for some manifold bolts and wiper mech bushes to turn up from Ford Germany, then i can assemble up your inlet manifold etc and get it sent on down to you
I have a vast range of "before and after" high resolution pics of your parts being done so will load them onto this thread over the weekend.
RS Stian: No, the fuel reg wasnt powder coated mate as i no about some sort of membrane inside it.
It was capped off, glass bead blasted, painted in Aluma Blast and laqured in satin diamond clear.
Kind regards
Chris @ PRP
have now started to put the parts back on..man all those bolts where do they go??ahhh
Last edited by fezzajsy; 30-05-2010 at 12:28 AM.
30-05-2010, 11:23 AM
#200
I've found that life I needed.. It's HERE!!
iTrader: (3)
Join Date: Oct 2007
Location: Kent
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Hi Phil
The power steering tank is Nels original ford plastic tank.
I degreased it, panel wiped it down, primeed it, shot a coat of black textured finish onto it and then diamond cleared it in satin finish.
It was then topped off with a brand new genuine ford cap.
Cheers
Chris @ PRP
The power steering tank is Nels original ford plastic tank.
I degreased it, panel wiped it down, primeed it, shot a coat of black textured finish onto it and then diamond cleared it in satin finish.
It was then topped off with a brand new genuine ford cap.
Cheers
Chris @ PRP
where did you get the stuff to do it from or can you do one for me if i send you a tank and some cash.
cheers,
Phil