Black sapph 2wd (31-1-2012 re-rebuild strip out) gt30 - Page 3

Moonstone Steve · 21-09-2008, 12:10 AM

That roof lining looks tops m8, it lifts the whole interior, good job.

Steve

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

biggiejody · 21-09-2008, 12:28 PM

oh hello fellow A.T.S fitter lol. its looking good so far, will have show mine some love and attention when i get it running again which hopefully will be a few weeks

Lo@der · 21-09-2008, 01:48 PM

Stunning job mate

Matt Baxter · 21-09-2008, 03:04 PM

Quote:

Originally Posted by biggiejody

oh hello fellow A.T.S fitter lol. its looking good so far, will have show mine some love and attention when i get it running again which hopefully will be a few weeks

lead technician/mot tester I think you'll find

How do you know i work for ATS then?

Matt Baxter · 21-09-2008, 03:05 PM

Quote:

Originally Posted by loader5710

Stunning job mate

So far so good glad you like it

how's yours going then?

biggiejody · 21-09-2008, 03:27 PM

Quote:

Originally Posted by Matt Baxter

lead technician/mot tester I think you'll find

How do you know i work for ATS then?

oooo so does tht mean u dont get dirty like me then lol.

coz in ur shiney shiney paintwork ur wearing the jolly green giant trousers and classy blue top lol and there unmissable by the trained eye lol.

so how long till u get ur cossie all done?

Matt Baxter · 21-09-2008, 03:35 PM

Quote:

Originally Posted by biggiejody

oooo so does tht mean u dont get dirty like me then lol.

coz in ur shiney shiney paintwork ur wearing the jolly green giant trousers and classy blue top lol and there unmissable by the trained eye lol.

so how long till u get ur cossie all done?

I see

nah mate still get dirty mate just i get paid more

(i wish)

I will start to swap over from the white one next sunday as I have the week off at the end of the month so it will need to be driving again for the 6th of october

what centre do you work at then

biggiejody · 21-09-2008, 03:46 PM

yer i had the same with mine but didnt go to plan. 5 months later nearly got it on the road lol. but thts wat a welded up diff does lol

im in croydon truck, so i take it ur in farnbourgh?

Matt Baxter · 21-09-2008, 03:59 PM

Quote:

Originally Posted by biggiejody

yer i had the same with mine but didnt go to plan. 5 months later nearly got it on the road lol. but thts wat a welded up diff does lol

im in croydon truck, so i take it ur in farnbourgh?

Lol

I work in aldershot

biggiejody · 21-09-2008, 04:02 PM

well once i get all mine done mayb we could meet up as ur only up the road from me really and someone i work wiv has got a 3 door were sorting so could have a mini meet lol i no are depot has room for doughnuts lol

Matt Baxter · 21-09-2008, 06:52 PM

Quote:

Originally Posted by biggiejody

well once i get all mine done mayb we could meet up as ur only up the road from me really and someone i work wiv has got a 3 door were sorting so could have a mini meet lol i no are depot has room for doughnuts lol

let me know how you get on mate

do you ever go to any meets? as i will be at the middlesex meet next month

cossie4i_ · 21-09-2008, 09:13 PM

Bloody good work Matt

Steve

Simmo · 25-09-2008, 06:58 PM

Great work Matt... coming along great guns!!!...

Matt Baxter · 25-09-2008, 07:27 PM

Quote:

Originally Posted by cossie4i

Bloody good work Matt

Steve

cheers so far so good cant wait to get it sorted

Quote:

Originally Posted by simmosaph

Great work Matt... coming along great guns!!!...

yeah its getting there

Matt Baxter · 25-09-2008, 07:32 PM

Just spent more money at Ford new fuel cap, lock kit new key and torch almost £70

also a new pair of Ford badges off ebay for £10

cos400 · 26-09-2008, 02:44 PM

hi how did u get your head lining out your car mate? (ie through the doors...boot..?)

Lo@der · 26-09-2008, 03:06 PM

Quote:

Originally Posted by Matt Baxter

So far so good glad you like it

how's yours going then?

I cant belive how bufty its looking

, I'm getting there will update my thread this week.

costina · 26-09-2008, 03:33 PM

Quote:

Originally Posted by cos400

hi how did u get your head lining out your car mate? (ie through the doors...boot..?)

I changed mine and removed it throu the boot

Paul

fezzajsy · 26-09-2008, 05:09 PM

gonna be awesome when done

biggiejody · 26-09-2008, 08:42 PM

nah not been to ant meets or anything yet, but will do as soons as its ready

Matt Baxter · 26-09-2008, 09:19 PM

Quote:

Originally Posted by loader5710

I cant belive how bufty its looking

, I'm getting there will update my thread this week.

Quote:

Originally Posted by cos400

hi how did u get your head lining out your car mate? (ie through the doors...boot..?)

As costina said it will come out through the boot

Quote:

Originally Posted by fezzajsy

gonna be awesome when done

yea with any luck it should look nice and clean

Quote:

Originally Posted by biggiejody

nah not been to ant meets or anything yet, but will do as soons as its ready

Matt Baxter · 26-09-2008, 09:22 PM

Got a new pair of bumper mouldings

As new under bonnet insulation

Matt Baxter · 26-09-2008, 09:24 PM

Fitted the new carbon mirror covers

Basky · 26-09-2008, 09:32 PM

As new under bonnet insulation

[/quote]
that looks familier,that used to be on my saph(the L plate one we had)

Matt Baxter · 26-09-2008, 09:36 PM

Quote:

Originally Posted by Basky

that looks familier,that used to be on my saph(the L plate one we had)

I see, thats prob why its in almost mint condition

ANDYRACER · 26-09-2008, 09:46 PM

Is the engine still not in?

Looks a tidy build with all the new bits.

Basky · 27-09-2008, 10:47 PM

Quote:

Originally Posted by Matt Baxter

I see, thats prob why its in almost mint condition

glad you got it ok,

Matt Baxter · 28-09-2008, 07:48 PM

Matt Baxter · 28-09-2008, 07:51 PM

The engines in at last

its been a long day though

Quite like it with the white bonnet

Rs-Simon · 28-09-2008, 08:01 PM

You dont hang around Chief, nice one.

.

Matt Baxter · 28-09-2008, 08:13 PM

Quote:

Originally Posted by Rs-Simon

You dont hang around Chief, nice one.

.

you sound like Fi

i am fucking aching now tho must be getting old mate, ready for some

Munch · 28-09-2008, 08:39 PM

coming on nicely there, keep it up mate

**Sanchez_** · 28-09-2008, 09:15 PM

Quote:

Originally Posted by Matt Baxter

you sound like Fi

i am fucking aching now tho must be getting old mate, ready for some

thoiught u was guna ring u numpty !! well done need anything in the weekl ?

Simmo · 28-09-2008, 09:22 PM

Good work Matt!!!...

miller3 · 28-09-2008, 09:30 PM

Quote:

Originally Posted by Moonstone Steve

That roof lining looks tops m8, it lifts the whole interior, good job.

Steve

Where did you get that budd

Matt Baxter · 28-09-2008, 09:36 PM

Quote:

Originally Posted by Jay.

thoiught u was guna ring u numpty !! well done need anything in the weekl ?

I will be at it again tomorrow if you want to pop over

Quote:

Originally Posted by Simmo

Good work Matt!!!...

Cheers Paul

Quote:

Originally Posted by miller3

Where did you get that budd

If you were asking me I got it off moonstone steve mate i am sure he has more if you want some

Matt Baxter · 29-09-2008, 09:32 PM

Today I removed the diff gearbox exhaust rear brakes and dash

after a bit fucking about the diff was out

got the diff back in to the black one

also fitted the fuel pump and new braided hose from the tank to pump

also fitted the koni's at the rear

and this is how the white one was left tonight

After all the hard work was done the hood rat aka Paul came round

Cheers Simon for the help today, same time tomorrow mate!

kjc300 · 29-09-2008, 09:37 PM

Nice one Purse!!!

Been busy mate

hai07222 · 29-09-2008, 09:46 PM

Coming together now, good work

Rs-Simon · 29-09-2008, 09:59 PM

pmsl @ HOOD RAT .

21-09-2008, 01:48 PM	#83
Lo@der Passionford Thread Killer Garage is empty, add now Trader Score: (8) Join Date: Feb 2006 Location: bournemouth Posts: 3,570 Rep Power: 10	Stunning job mate __________________ Low Slung Denim

21-09-2008, 09:13 PM	#92
cossie4i_ TT T38 Power Garage is empty, add now Trader Score: (11) Join Date: Apr 2005 Location: kent Posts: 20,333 Rep Power: 27	Bloody good work Matt Steve __________________ TT T38, AB07 Cam, Ported Head, Hart Inlet, Spec-R intercooler, Air Injectors, Gripper Diff , Turbosystems Mapped.

25-09-2008, 06:58 PM	#93
Simmo I've found that life I needed.. It's HERE!! Garage is empty, add now Trader Score: (19) Join Date: Dec 2004 Location: West Sussex Posts: 1,403 Rep Power: 9	Great work Matt... coming along great guns!!!... __________________ 2.1zvh FRST West Sussex RS Owners Club

25-09-2008, 07:32 PM	#95
Matt Baxter Back in black! Garage is empty, add now Trader Score: (33) Join Date: Feb 2006 Location: Fleet, Hampshire Posts: 5,112 Rep Power: 12	Just spent more money at Ford new fuel cap, lock kit new key and torch almost £70 also a new pair of Ford badges off ebay for £10 __________________ My rebuild thread (2wd = proper cossy!) http://passionford.com/forum/restora...iny-stuff.html

26-09-2008, 02:44 PM	#96
cos400 PassionFord Regular Garage is empty, add now Trader Score: (0) Join Date: Sep 2004 Location: at work Posts: 456 Rep Power: 8	roof line hi how did u get your head lining out your car mate? (ie through the doors...boot..?)

26-09-2008, 05:09 PM	#99
fezzajsy 10K+ Poster!! Garage is empty, add now Trader Score: (9) Join Date: Nov 2004 Location: jeRSey..isles Posts: 12,475 Rep Power: 20	gonna be awesome when done __________________ http://passionford.com/forum/restora...y-tidy-up.html

26-09-2008, 09:22 PM	#102
Matt Baxter Back in black! Garage is empty, add now Trader Score: (33) Join Date: Feb 2006 Location: Fleet, Hampshire Posts: 5,112 Rep Power: 12	Got a new pair of bumper mouldings As new under bonnet insulation __________________ My rebuild thread (2wd = proper cossy!) http://passionford.com/forum/restora...iny-stuff.html

26-09-2008, 09:24 PM	#103
Matt Baxter Back in black! Garage is empty, add now Trader Score: (33) Join Date: Feb 2006 Location: Fleet, Hampshire Posts: 5,112 Rep Power: 12	Fitted the new carbon mirror covers __________________ My rebuild thread (2wd = proper cossy!) http://passionford.com/forum/restora...iny-stuff.html

26-09-2008, 09:32 PM	#104
Basky Advanced PassionFord User Garage is empty, add now Trader Score: (0) Join Date: Jul 2005 Location: stufFORDshire Posts: 1,595 Rep Power: 8	As new under bonnet insulation [/quote] that looks familier,that used to be on my saph(the L plate one we had) __________________

26-09-2008, 09:46 PM	#106
ANDYRACER The more turbos,more fun! Garage is empty, add now Trader Score: (0) Join Date: Sep 2007 Location: Stockport. N.W. Posts: 1,137 Rep Power: 6	Is the engine still not in? Looks a tidy build with all the new bits. __________________ IHI Power'd Skoda Octavia Vrs-325bhp/311ft @ 1.4 bar Dragon Green Volkswagen Golf Vr6-Standard

28-09-2008, 07:48 PM	#108
Matt Baxter Back in black! Garage is empty, add now Trader Score: (33) Join Date: Feb 2006 Location: Fleet, Hampshire Posts: 5,112 Rep Power: 12	__________________ My rebuild thread (2wd = proper cossy!) http://passionford.com/forum/restora...iny-stuff.html

28-09-2008, 07:51 PM	#109
Matt Baxter Back in black! Garage is empty, add now Trader Score: (33) Join Date: Feb 2006 Location: Fleet, Hampshire Posts: 5,112 Rep Power: 12	The engines in at last its been a long day though Quite like it with the white bonnet __________________ My rebuild thread (2wd = proper cossy!) http://passionford.com/forum/restora...iny-stuff.html Last edited by Matt Baxter; 28-09-2008 at 08:09 PM.

28-09-2008, 08:01 PM	#110
Rs-Simon Regular Contributor Garage is empty, add now Trader Score: (1) Join Date: May 2007 Location: Yateley Posts: 288 Rep Power: 5	You dont hang around Chief, nice one.. __________________

28-09-2008, 08:39 PM	#112
Munch Mr. Sparkle! Garage is empty, add now Trader Score: (0) Join Date: Nov 2005 Location: Wiltshire - swindon Posts: 12,687 Rep Power: 19	coming on nicely there, keep it up mate __________________ CHEERS, LEE Onslow Loves COD! Arguing on the internet is like racing in an impreza, even if you win, you're still a twat.

28-09-2008, 09:22 PM	#114
Simmo I've found that life I needed.. It's HERE!! Garage is empty, add now Trader Score: (19) Join Date: Dec 2004 Location: West Sussex Posts: 1,403 Rep Power: 9	Good work Matt!!!... __________________ 2.1zvh FRST West Sussex RS Owners Club

29-09-2008, 09:32 PM	#117
Matt Baxter Back in black! Garage is empty, add now Trader Score: (33) Join Date: Feb 2006 Location: Fleet, Hampshire Posts: 5,112 Rep Power: 12	Today I removed the diff gearbox exhaust rear brakes and dash after a bit fucking about the diff was out got the diff back in to the black one also fitted the fuel pump and new braided hose from the tank to pump also fitted the koni's at the rear and this is how the white one was left tonight After all the hard work was done the hood rat aka Paul came round Cheers Simon for the help today, same time tomorrow mate! __________________ My rebuild thread (2wd = proper cossy!) http://passionford.com/forum/restora...iny-stuff.html

29-09-2008, 09:37 PM	#118
kjc300 PassionFord Post Whore!! Garage is empty, add now Trader Score: (1) Join Date: Aug 2003 Location: Hampshire Posts: 3,789 Rep Power: 12	Nice one Purse!!! Been busy mate __________________ Cheers, Kev.

29-09-2008, 09:46 PM	#119
hai07222 Too many posts.. I need a life!! Garage is empty, add now Trader Score: (0) Join Date: Jul 2007 Location: Birmingham Posts: 558 Rep Power: 5	Coming together now, good work __________________

29-09-2008, 09:59 PM	#120
Rs-Simon Regular Contributor Garage is empty, add now Trader Score: (1) Join Date: May 2007 Location: Yateley Posts: 288 Rep Power: 5	pmsl @ HOOD RAT . __________________

29-09-2008, 09:59 PM
PassionFord Ford Focus Paid Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reshelling a Cos	fordnut	General Car Related Discussion.	13	05-08-2007 12:19 AM
Reshelling rs turbo	shagster42	Ford Escort RS Turbo	1	21-11-2006 06:11 PM
reshelling a s2 using a non-rs shell	andre_k	General Car Related Discussion.	8	03-09-2006 07:17 PM
reshelling a rs turbo. what parts would u replace with new?	EssexMikeSi	General Car Related Discussion.	5	02-12-2005 02:13 AM
Anyone up for reshelling an ERST?	James Raby	Ford Escort RS Turbo	23	03-09-2005 05:23 PM