møffe

here goes

in the back compbrake 300x20 kit


front 330 powervane + AP calipers

think this one is the engine. dont know.. maybe the trunk LOL


me and a friend made a breather tank in abaut 2hours.


buoght a stainless manifold from a mate of mine. it have been in his car abaut 8000km

the aim are abaut 1mill HP and a stopping power of 3mia G´s (so then its half Supra and BMW.. NOOT)

then i found some wery cheep OZ`s superleggera so theay are comin on this year.

møffe

more

think the std 4x4 manifold took med 1,5 week to take off and the new one took me abaut 15min to put on.
.


borrowed this at work, makes it a lot easyer


before you ask abaut the blue color. i am working at AC hydralik, http://www.ac-hydraulic.dk/

you probertly know it. maybe just with a WEEBER name on it.

møffe

some more.


again a blue color..

møffe

møffe

deflex thing

just finished my brackets for my AP calipers



i´m just wating for a packet from mike rainbird with a set of four konis and leda springs
and some 63x1,5 longer bolts for my wheels from burton.

møffe

the aim for this car are at mild trackday car with abaut 300hp and low down tourqe. (had first a 2wd manifold but sold it for the stainless one) the car are fitted with 3"mongoose and RS500 pace IC,big JR cone and a collings acuator and stage 1 chip. now im driving with 1,1bar of boost, and are okay happy with it. next year i hope i will get a ajustible rear beam from mike R and some new wheels and probertly a respray.

BTW the car are a final edtion from 1992.

the strutbrance are 110% my own design and are handmade by my self. the same with the breather tank and the baily lookalike turbodamper. and the flance to the turbo i´m building my self. the idea with this car altogether are to build so mutch as possible my self. and have as many spicial things on it there are homemade.

Brian

iTrader: (2)

Brian

møffe

Leda springs in track spec and 18 new 63x1,5 bolts


a box of konis


thanx to mike rainbird.

fezzajsy

iTrader: (9)

nice

Mike Rainbird

iTrader: (3)

Looks great . I could have done you the wheel studs as well for £1.50 each and obviously they could have been thrown in with the dampers / springs .

møffe

in know.. i found out this weekend wen i got my bracket finished for my AP calipers.. fooking. then i orderet from burton.. my OZ wheels i bought cheep (and with 25mm spacers) are with a too high ET so i dont have room for my calipers. and with the 25mm spacers i need longer studs.

there are just a million things there with a + on my budget.. and my new costum brakehoses are with a wrong fitting in the one end.. . .

and need it all togehter for this weekend. SUCKS. and it rains here in denmark at the moment.. and havent build a garage yet.

but im looking forward to try these springs. theay are the first here in denmark thet i know off.

møffe

started her up today. juste needed a new battery and in the mittle of ewerything a new radiator for the kabin! at least the wather dident disaper inside the engine.

so were out driwing today with my wife( first drive in 6months) and i ran in to a corsa OPC. 192hp and 7,2 0-100km/t and killed it compleatly. felt sooo nice. i really love my sierra. or the mistrease as my wife call it. at least my wife love our cosworth to.

next projekt are body work, and it relly need it. the last peoble there have been working on it must bee donald duck and picasso. (its from italy)

møffe

now i finaly been on RR with the car.

i´ve got

mongoose
JR conefilter
costum manifold
std injektores
collings acuator
collings stage 1 chip

møffe

after a couple of years without mods, well only some paint on my superleggera´s



and a bigger turbo

just a standart T34.63

then i always wanted to build my own inlet plenum

and here it is.





but i dident like the trumpet´s so after some time in my lathe



and some milling

i had this


now they are a little bit longer







and the bracket for the trottlewire



and then fitted

whizzisat114

iTrader: (2)

Some nice home made parts going into the car

Glenn_

iTrader: (1)

Nice project.I also like the home made parts too.

møffe

next projekt are a air scoop. this is just one made for a old sierra dohc projekt



so i just need to build a lower intercooler and move my oilcooler.

the plan are to see how many horsepower i get when it gets 1,3 bars of boost.

after that we probertly fit ab07 or piper COSBP285HT

and yes, becorse of the cosworth part´s special TAX its more fun to build parts myself.

MrC

Loving the blue turbo lol