R.I.P. Focus Turbo...Focus RS on the go! FOR SALE!!!!!

COCHYN · 16-06-2008, 08:11 PM

Well as everyone knows, my Focus Turbo, which its history can be seen here....

http://passionford.com/forum/restorations-rebuilds-and-projects/231169-focus-turbo.html

.....died a very horrible death, as can be seen in this thread....

http://passionford.com/forum/general-car-related-discussion/235738-well-its-over-guys-car-in-flames.html

Inevitably, the loss of the car has left a major void in my life as it has always been the sole thing I could turn to when everything else seemed dull. No regrets, gave me a hell of a lot of enjoyment and I really wouldn’t change a thing…except maybe knowing the oil pump was on its last leg

So in the first week of almost going crazy without a car, I literally took a step closer to madness by buying a very nice 2.6 Twin Turbo RX-7. The colour was questionable, but damn was it a fun “look at me” ride

People always tell me, “once you go Jap, you don’t go back”, so I went and bought a proper one. It was fun, but not a patch on a fast Ford.

So I continued my search for an Escort Cosworth, and although I found the one I want….well, wanted for the better part of 10 years, the owner won’t sell up just yet. So another toy is needed in the mean time.

The phrase “stick to what you know best” kinda has a big part here…

Here she is, number 0788. Owned it for a month now. Very clean car TBH, a few bits n’ bobs needed seeing to, but nothing major and were sorted in my driveway within a few minutes. Lovely car, but not a patch on my Black Focus.

How she looked before I picked her up…

As mentioned before, some bell-end nicked around £2,500 worth of gear off my Focus while it was in the “secure” lock up, but they failed to spot my custom stainless intercooler pipework. Although the intercooler itself was not salvageable and the Roose hoses were all destroyed, I managed to get all the key bits and sent them of to my local sand blaster and also had them coated in satin black. Not trying to copy the Black Focus’s engine bay, but roughly the same setup. All I need now is to get another Intercooler and Roose hoses and I get sell the Chargecooler system complete.

Ding in the long pipe where the engine mounts melted and everything collapsed on the pipe...

I cut the ding section out and tig welded a new piece in before powder coating...

I was a bit concerned when I took the car to my local playground in Ogwen, driving it hard into the usual corners to see how she compares to the Black Focus. Pretty good in all fairness, but feels a bit like a good handling boat due to the height. So decked it a bit with some H&R’s. Also, whilst I took everything off the front end, I gave the struts a once over with some paint and cleaned everything up etc (and no, the yellow bucket isn’t used as an axle stand

) Oh, and I had a mate paint the bumper vents and fog surrounds in gloss black, while the upper grill was colour coded.

I got me some nice new smoked ST170 lights.

Thought this was a nice touch...

Mods so far…

K&N Gen II with Pumaspeed 400 elbow,
Bluefin and decat file,
Miltek exhaust,
Miltek decat (Thermo-Tec wrapped),
Custom intercooler system,
Turbosmart recirc. Valve (already on it),
H&R springs,
White wheels (already on it)
Gloss painted bumper fins and fog surrounds,
Colour coded grill,
ST170 headlights

Still missing my Focus so much, can’t believe it’s gone so quickly. The whole experience has been heart wrenching and I pray that none of you will ever have to experience anything as bad.

So in conclusion…I’m back in the game

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

COCHYN · 16-06-2008, 08:12 PM

Here's a bit about the recycled intercooler

On my black Focus....

After the fire, you can see the inlet pipe behind the engine and beside the front wing, and the long pipe from the compressor side of turbo is sitting on the drivers side seat, after being chucked from the road after the fire...

After picking them out of the car...

After cutting the dented bit out, tig welding a new piece in, sand blast and powder coat in satin black for a little change from the original look...

With some custom Roose hoses and a 700x220x70mm intercooler, trial fitting so far so bare with me

Still need to get some more hoses to extend the filter like my old one was, along with a nice big Group A again

Getting there slowly, had the car a month now, but I think in that time the work I've done is quite impressive, baring in mind the loss of the black one is still hovering

Zetecfiesta · 16-06-2008, 08:36 PM

looks good!

Fiesta_ie · 16-06-2008, 08:58 PM

good to see you're back and in style ;P

Dan · 16-06-2008, 09:59 PM

Quote:

Originally Posted by COCHYN

This pic made me smile mate, nice to see that you've still got the same enthusiasm for the modding!

I'm glad you have too, your black Focus was absolutely beautiful!

Try and make this one stand out from the crowd again, a tough job with an FRS!

jonnyrsturbo · 16-06-2008, 10:00 PM

nice 1 mate

dont break this 1

blacky. · 16-06-2008, 11:29 PM

you dont waste any time do you

Luca · 16-06-2008, 11:33 PM

Top work my friend looking sweeeeet....

Be back at Brunters in no time mate and progressing from where the black beauty left off.

COCHYN · 17-06-2008, 07:32 AM

Cheers guys, appreciate the "egging me on" comments!

Can't wait to get back to Brunters, it kinda feels like where we should be!

Turbocabbie · 17-06-2008, 07:41 AM

damn you have some stunning area's around you

Rab · 17-06-2008, 10:52 PM

Nice!!! Needs the wheels painting. Silver or Black I think.

Pity about the black one, it was a lovely motor! But if you did that with a 1.4 shopping car, where will the RS end up.

500bhp monster?

COCHYN · 17-06-2008, 10:59 PM

Quote:

Originally Posted by Rab

Nice!!! Needs the wheels painting. Silver or Black I think.

Pity about the black one, it was a lovely motor! But if you did that with a 1.4 shopping car, where will the RS end up.

500bhp monster?

I'll make it into something special, don't you worry

But it'll never replace the black one. Hence why this is just a toy until I get an EsCos

The wheels are going, hate standard stuff. Wanting some nice MO's

Benni · 17-06-2008, 11:19 PM

Fantastic car mate, I think the wheels would be better standard, but I love it! I made you this, Won't last long on here, so you might want to use one of the three images. But, will be okay for most other forums.

Keep up the good work, Benni.

COCHYN · 17-06-2008, 11:22 PM

Www, that's clever, cheers for that Benni

But the wheels have got to go, their immaculate, but the Compomotive's are IMO the best wheels on a Ford. Gotta be done again

Oh, look out for me in Liverpool Benni, I'm there a lot

Benni · 17-06-2008, 11:27 PM

I'll keep my eye out for you mate! I did a photoshop for someone a while ago of a Focus RS on new style comps in antherite if you wanna look?

Benni!

COCHYN · 29-06-2008, 05:34 PM

Newly revised Intercooler system now fits a treat, after a bit of alteration work to allow more clearance from the air con, as the black didn't have that.

Note, the filter is for sale after next week when the Group A comes

jonnyrsturbo · 29-06-2008, 05:41 PM

stunning mate

rst-g · 29-06-2008, 06:00 PM

looks well smart!!!

Charlie Chalk · 29-06-2008, 06:02 PM

Wouldnt mind one tbh, Nice cars.

Keep it up .

COCHYN · 29-06-2008, 08:19 PM

Will do, not got long now till the Fair, so need to work harder to do a few more custom bits

COCHYN · 16-07-2008, 09:44 PM

Just some updates to keep this thread alive

Had some time to fit my new wheels today, so here's a couple of pics. Sorry, no arty farty pics like usual, didn't have much time, hence the blurryness...

These are for sale if anyone wants them. Packed and ready to go to a new owner...

And off subject of wheels, who wants to guess what I'm making for track days? Looks very rough here, started making it a day after my tonsilectomy :doh: so wasn't really up to it, but these were taken a while back and it looks much better now, and will soon have a nice gloss black coating. Will feed enough air to me nice big Group A

ph2003 · 16-07-2008, 10:02 PM

looks like the beginings of a lovely car!

slammedorion · 16-07-2008, 10:37 PM

Looks mint on the new wheels...

Perfect choice for a Focus RS...

That bit of fibreglass above... looks like a air feed, looks like it'll fit neatly where the n/s headlight is suppose to be...

Very nice...

jonnyrsturbo · 16-07-2008, 11:52 PM

really liking the new wheels mate

COCHYN · 17-07-2008, 08:57 AM

Quote:

Originally Posted by slammedorion

Looks mint on the new wheels...

Perfect choice for a Focus RS...

That bit of fibreglass above... looks like a air feed, looks like it'll fit neatly where the n/s headlight is suppose to be...

Very nice...

Spot on!

turbo_boost · 17-07-2008, 09:45 AM

Sorry mate but imo the focus rs wheels look better. However nice car

COCHYN · 17-07-2008, 09:47 AM

your gay!

CliffRS4 · 17-07-2008, 11:50 AM

Gutted for you with the black Focus.

It's the dedicated that fight back. Looking forward to keeping an eye on the new mods that will undoubtably happen.

Love the wheels now.

COCHYN · 26-07-2008, 11:04 AM

Took some pics this morning of how she stands. A little dissapointed I couldn't get a manifold in time, but I don't think it looks too bad after just 2 months of ownership

The headlamp pod will be ready, so that will be on in the show too!

luke89 · 26-07-2008, 11:33 AM

car looks lovely mate !!

PeterRST · 26-07-2008, 11:37 AM

Yep, awesome car you've got there!

Seen the other thread about your black one going up in flames and was proper gutted for you.

Glad to see there's a happy-end!

PeterRST · 26-07-2008, 11:38 AM

Oh, great pictures, too, btw. Nice car AND landscape!

COCHYN · 30-07-2008, 08:27 PM

As you've probably read in one of my previous threads, I was busy making a duct for my Group A filter for track/show use. Here's how it started, using a posh Carte Dor ice cream tub for the duct

But because it was quite difficult to work with from the outside mold, I made another mold from the inside of headlamp lense. Which IMO looked more original because the fibreglass resin showed all the small details like the lines on the upper lens and the Ford logo etc.

Making tatty brackets, which will be changed when I have enough time to focus on the pod more after Ford Fair. Which includes all impure sections due to lazy filler rubbing

...

Then had it painted in gloss black to match the bumper fins and fog surrounds...

The hardcore ending

macca33 · 13-09-2008, 02:40 AM

Alright mate good job, love the wheels.. Are you going to do your bonnet the same as the black one?

COCHYN · 13-09-2008, 08:29 AM

Nah, gonna keep this one more or less standard on the outside. Just a few nice touches

Brian · 13-09-2008, 08:35 AM

Looks stunning mate

Brian

Allyc85 · 13-09-2008, 12:04 PM

Your car makes me want a Focus RS so bad! That air vent looks brilliant mate

escort van s.n · 13-09-2008, 12:06 PM

cracking looking rs that mate

rst-g · 13-09-2008, 02:03 PM

love that air intake mate!!!!!!!

COCHYN · 13-09-2008, 10:31 PM

Want one?

Here's a few from Ford Fair

16-06-2008, 08:12 PM	#2
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Here's a bit about the recycled intercooler On my black Focus.... After the fire, you can see the inlet pipe behind the engine and beside the front wing, and the long pipe from the compressor side of turbo is sitting on the drivers side seat, after being chucked from the road after the fire... After picking them out of the car... After cutting the dented bit out, tig welding a new piece in, sand blast and powder coat in satin black for a little change from the original look... With some custom Roose hoses and a 700x220x70mm intercooler, trial fitting so far so bare with me Still need to get some more hoses to extend the filter like my old one was, along with a nice big Group A again Getting there slowly, had the car a month now, but I think in that time the work I've done is quite impressive, baring in mind the loss of the black one is still hovering __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

16-06-2008, 08:58 PM	#4
Fiesta_ie Sandpaperman in acction Garage is empty, add now Trader Score: (0) Join Date: Oct 2007 Location: Lisbon Posts: 217 Rep Power: 5	good to see you're back and in style ;P __________________ old project http://passionford.com/forum/restorations-rebuilds-and-projects/234443-portuguese-fiesta-mk4.html fiesta mk3 xr2i zetec 130cv

16-06-2008, 11:29 PM	#7
blacky. PassionFord Post Troll Garage is empty, add now Trader Score: (0) Join Date: Nov 2005 Location: stockton Posts: 3,106 Rep Power: 10	you dont waste any time do you __________________ nail 0-60 in 3.4 1/4 in 11.58 *its not abuse anyway you spazz*

16-06-2008, 11:33 PM	#8
Luca Lukesville 1994 Ford Fiesta Trader Score: (2) Join Date: Nov 2005 Location: Portsmouth Posts: 9,245 Rep Power: 16	Top work my friend looking sweeeeet.... Be back at Brunters in no time mate and progressing from where the black beauty left off. __________________ Built @ JKM Performance - NEW SPEC 471.9 bhp thetrolley +500hp/ton - 134mph over 1/4 mile April 2011 - 11.74 @ 129.15mph

17-06-2008, 07:32 AM	#9
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Cheers guys, appreciate the "egging me on" comments! Can't wait to get back to Brunters, it kinda feels like where we should be! __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

16-06-2008, 08:36 PM	#3
Zetecfiesta PassionFord Post Whore!! Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: Westhoughton Bolton Posts: 3,934 Rep Power: 11	looks good!

16-06-2008, 10:00 PM	#6
jonnyrsturbo is half man, half amazin' Garage is empty, add now Trader Score: (0) Join Date: Feb 2008 Location: newcastle upon tyne Posts: 2,765 Rep Power: 7	nice 1 mate dont break this 1

17-06-2008, 10:52 PM	#11
Rab Fucking superstar........ Garage is empty, add now Trader Score: (0) Join Date: May 2004 Location: Argyll.... It's lonely... Posts: 12,601 Rep Power: 20	Nice!!! Needs the wheels painting. Silver or Black I think. Pity about the black one, it was a lovely motor! But if you did that with a 1.4 shopping car, where will the RS end up. 500bhp monster? __________________

17-06-2008, 11:19 PM	#13
Benni Ban[B][/B]ned Garage is empty, add now Trader Score: (0) Join Date: Jul 2005 Location: The Pool. Posts: 33,958 Rep Power: 40	Fantastic car mate, I think the wheels would be better standard, but I love it! I made you this, Won't last long on here, so you might want to use one of the three images. But, will be okay for most other forums. Keep up the good work, Benni. __________________ Bennitard.

17-06-2008, 11:22 PM	#14
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Www, that's clever, cheers for that Benni But the wheels have got to go, their immaculate, but the Compomotive's are IMO the best wheels on a Ford. Gotta be done again Oh, look out for me in Liverpool Benni, I'm there a lot __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

17-06-2008, 11:27 PM	#15
Benni Ban[B][/B]ned Garage is empty, add now Trader Score: (0) Join Date: Jul 2005 Location: The Pool. Posts: 33,958 Rep Power: 40	I'll keep my eye out for you mate! I did a photoshop for someone a while ago of a Focus RS on new style comps in antherite if you wanna look? Benni! __________________ Bennitard.

29-06-2008, 05:34 PM	#16
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Newly revised Intercooler system now fits a treat, after a bit of alteration work to allow more clearance from the air con, as the black didn't have that. Note, the filter is for sale after next week when the Group A comes __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

29-06-2008, 05:41 PM	#17
jonnyrsturbo is half man, half amazin' Garage is empty, add now Trader Score: (0) Join Date: Feb 2008 Location: newcastle upon tyne Posts: 2,765 Rep Power: 7	stunning mate

29-06-2008, 06:00 PM	#18
rst-g ZETEC TURBO Garage is empty, add now Trader Score: (0) Join Date: Sep 2007 Location: upton,wirral Posts: 1,703 Rep Power: 6	looks well smart!!!

29-06-2008, 06:02 PM	#19
Charlie Chalk Unknown. Garage is empty, add now Trader Score: (1) Join Date: Oct 2003 Location: ... Posts: 50,962 Rep Power: 59	Wouldnt mind one tbh, Nice cars. Keep it up . __________________ GE - 1D - T

29-06-2008, 08:19 PM	#20
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Will do, not got long now till the Fair, so need to work harder to do a few more custom bits __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

16-07-2008, 09:44 PM	#21
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Just some updates to keep this thread alive Had some time to fit my new wheels today, so here's a couple of pics. Sorry, no arty farty pics like usual, didn't have much time, hence the blurryness... These are for sale if anyone wants them. Packed and ready to go to a new owner... And off subject of wheels, who wants to guess what I'm making for track days? Looks very rough here, started making it a day after my tonsilectomy :doh: so wasn't really up to it, but these were taken a while back and it looks much better now, and will soon have a nice gloss black coating. Will feed enough air to me nice big Group A __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

16-07-2008, 10:02 PM	#22
ph2003 Virgin Garage is empty, add now Trader Score: (0) Join Date: Jan 2006 Posts: 8 Rep Power: 0	looks like the beginings of a lovely car!

16-07-2008, 10:37 PM	#23
slammedorion Orion ZT coming soon Garage is empty, add now Trader Score: (0) Join Date: Nov 2004 Location: Crewe Posts: 1,628 Rep Power: 9	Looks mint on the new wheels... Perfect choice for a Focus RS... That bit of fibreglass above... looks like a air feed, looks like it'll fit neatly where the n/s headlight is suppose to be... Very nice...

16-07-2008, 11:52 PM	#24
jonnyrsturbo is half man, half amazin' Garage is empty, add now Trader Score: (0) Join Date: Feb 2008 Location: newcastle upon tyne Posts: 2,765 Rep Power: 7	really liking the new wheels mate

17-07-2008, 09:45 AM	#26
turbo_boost Too many posts.. I need a life!! Garage is empty, add now Trader Score: (0) Join Date: Oct 2005 Location: on planet earth Posts: 563 Rep Power: 0	Sorry mate but imo the focus rs wheels look better. However nice car

17-07-2008, 09:47 AM	#27
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	your gay! __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

17-07-2008, 11:50 AM	#28
CliffRS4 PassionFord Post Whore!! Garage is empty, add now Trader Score: (1) Join Date: Jun 2003 Location: Hertfordshire Posts: 4,430 Rep Power: 13	Gutted for you with the black Focus. It's the dedicated that fight back. Looking forward to keeping an eye on the new mods that will undoubtably happen. Love the wheels now. __________________

26-07-2008, 11:04 AM	#29
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Took some pics this morning of how she stands. A little dissapointed I couldn't get a manifold in time, but I don't think it looks too bad after just 2 months of ownership The headlamp pod will be ready, so that will be on in the show too! __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

26-07-2008, 11:33 AM	#30
luke89 Team HOTHOT! Garage is empty, add now Trader Score: (1) Join Date: Apr 2004 Location: Reading, Berkshire Drives : 2.0ltr fez .. when it works Posts: 3,969 Rep Power: 11	car looks lovely mate !! __________________ lambo green audi tt 265bhp 4x4 umm GPtuning

26-07-2008, 11:37 AM	#31
PeterRST Advanced PassionFord User Garage is empty, add now Trader Score: (1) Join Date: Feb 2006 Location: Ulm/Germany Posts: 2,478 Rep Power: 9	Yep, awesome car you've got there! Seen the other thread about your black one going up in flames and was proper gutted for you. Glad to see there's a happy-end! __________________ Original picture by Quax

26-07-2008, 11:38 AM	#32
PeterRST Advanced PassionFord User Garage is empty, add now Trader Score: (1) Join Date: Feb 2006 Location: Ulm/Germany Posts: 2,478 Rep Power: 9	Oh, great pictures, too, btw. Nice car AND landscape! __________________ Original picture by Quax

30-07-2008, 08:27 PM	#33
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	As you've probably read in one of my previous threads, I was busy making a duct for my Group A filter for track/show use. Here's how it started, using a posh Carte Dor ice cream tub for the duct But because it was quite difficult to work with from the outside mold, I made another mold from the inside of headlamp lense. Which IMO looked more original because the fibreglass resin showed all the small details like the lines on the upper lens and the Ford logo etc. Making tatty brackets, which will be changed when I have enough time to focus on the pod more after Ford Fair. Which includes all impure sections due to lazy filler rubbing ... Then had it painted in gloss black to match the bumper fins and fog surrounds... The hardcore ending __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

13-09-2008, 02:40 AM	#34
macca33 Regular Contributor Garage is empty, add now Trader Score: (0) Join Date: Sep 2006 Location: N Ireland Posts: 287 Rep Power: 6	Alright mate good job, love the wheels.. Are you going to do your bonnet the same as the black one? __________________ People on face book with a couple of hundred friends plus!!! GET FUCKING REAL!!!

13-09-2008, 08:29 AM	#35
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Nah, gonna keep this one more or less standard on the outside. Just a few nice touches __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html

13-09-2008, 08:35 AM	#36
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Looks stunning mate Brian __________________

13-09-2008, 12:04 PM	#37
Allyc85 I've found that life I needed.. It's HERE!! Garage is empty, add now Trader Score: (0) Join Date: Oct 2006 Location: Beer Posts: 1,469 Rep Power: 7	Your car makes me want a Focus RS so bad! That air vent looks brilliant mate

13-09-2008, 12:06 PM	#38
escort van s.n 15000 Garage is empty, add now Trader Score: (0) Join Date: Mar 2008 Location: johnstonebridge,lockerbie Posts: 24 Rep Power: 0	cracking looking rs that mate __________________ white van man rule the highways

13-09-2008, 02:03 PM	#39
rst-g ZETEC TURBO Garage is empty, add now Trader Score: (0) Join Date: Sep 2007 Location: upton,wirral Posts: 1,703 Rep Power: 6	love that air intake mate!!!!!!! __________________ FIESTA ZETEC TURBO RE-BUILD http://passionford.com/forum/restora...ild-start.html DA TURB RUNNA ROUND http://passionford.com/forum/restora...er-engine.html

13-09-2008, 10:31 PM	#40
COCHYN Ginger Welsh Boy Garage is empty, add now Trader Score: (0) Join Date: Jan 2005 Location: North Wales....Macclesfield area now though! Posts: 8,078 Rep Power: 16	Want one? Here's a few from Ford Fair __________________ Focus Cosworth Projecthttp://passionford.com/forum/restora...7-10-09-a.html Focus RS Toyhttp://passionford.com/forum/restora...on-the-go.html Last edited by COCHYN; 13-09-2008 at 10:34 PM.