my project cab
#1
Advanced PassionFord User
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Blackpool
Posts: 1,798
Likes: 0
Received 0 Likes
on
0 Posts
my project cab
heres how the car looked when i first went to see it:
With these wheels on: ew!
A crack in the back bumper:
The roof is in a generally bad state lol:
Got it home and gave it a clean up:
And changed the wheels for these
With these wheels on: ew!
A crack in the back bumper:
The roof is in a generally bad state lol:
Got it home and gave it a clean up:
And changed the wheels for these
#2
Advanced PassionFord User
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Blackpool
Posts: 1,798
Likes: 0
Received 0 Likes
on
0 Posts
then ripped the plates off and put new ones on:
and thats how it looks at the moment, the car went in for an mot today, doesnt need too much doing to it
front suspension, track control arms and ball joints, rear wheel bearing needs adjusting, and a few bushes here and there.
current plans are:
New roof
get all the mot stuff sorted
Sell the magnex axhaust system, i dont like the sound of it.
Buy a full custom stainless exhaust from permazaust, they make it to my spec and can make it sound how i want it to sound
Polybush the whole car
Buff the entire car
Paint a few bits here and there
Replace every bolt for new ones
New bumpers
Few other bits and bobs that i cant remember right now.
Basically the story behind the car is its been sat for just under a year and the owner just wanted rid. Ive bought it as a project, the shell is absolutely solid, never had any welding nor is it showing any signs of it, even in the usual places there is very minor surface rust statring to show, but under the bonnet is in very good condition
Current spec:
Escort xr3i cabriolet;
1990 'G' plate
4-2-1 branch manifold
Kent cam
Vernier pulley
Sierra sapphire cosworth steering wheel
Mint 88' spec interior throughout
Full Stainless 3" magnex exhaust system
17" Dezent alloys
OMP strut brace
Rs turbo spoiler
90 spec bumpers
Cheers for looking, Dan
#3
Advanced PassionFord User
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Blackpool
Posts: 1,798
Likes: 0
Received 0 Likes
on
0 Posts
sorted all the work for the mot now, forgot to add the most important one to the list of failure..................emissions
i now know that on the efi model there is a screw that you can adjust which i have located, its back in at work for its re-test on thursday so i can have a play about with it and see if can get it under 3% fingers crossed!
got it back from its mot and attacked it on the saturday, stripped down the passenger side to replace the strut and tca and found that this was why the car was pulling wildly to the left
replaced the strut and tca on passenger side:
did the folowing on the drivers side too ( i didnt have to replace the drivers side strut for mot but didnt see the point in only replacing one )
the arch looked great for condition, again no rust:
i sprayed it satin black (it wasw going dark by this time so no pics of it lol, but painted the caliper red and took a quick pic the day after:
took the front bumper off aswell to see what condition the front panel was in:
again only small areas of surface rust, so ive flatted the front panel and its going to get a fresh coat of paint
New plans now ( providing the car gets through emissions test on thursday ) are new BLACK roof, and a full respray in pearl white, although the paint could be buffed back to a shine, there are areas where the previous owner has burnt through the paint from previous attempts at restoring the paint, and touching in stonechips with a very off-white paint.
thats all for now, cheers for reading
i now know that on the efi model there is a screw that you can adjust which i have located, its back in at work for its re-test on thursday so i can have a play about with it and see if can get it under 3% fingers crossed!
got it back from its mot and attacked it on the saturday, stripped down the passenger side to replace the strut and tca and found that this was why the car was pulling wildly to the left
replaced the strut and tca on passenger side:
did the folowing on the drivers side too ( i didnt have to replace the drivers side strut for mot but didnt see the point in only replacing one )
the arch looked great for condition, again no rust:
i sprayed it satin black (it wasw going dark by this time so no pics of it lol, but painted the caliper red and took a quick pic the day after:
took the front bumper off aswell to see what condition the front panel was in:
again only small areas of surface rust, so ive flatted the front panel and its going to get a fresh coat of paint
New plans now ( providing the car gets through emissions test on thursday ) are new BLACK roof, and a full respray in pearl white, although the paint could be buffed back to a shine, there are areas where the previous owner has burnt through the paint from previous attempts at restoring the paint, and touching in stonechips with a very off-white paint.
thats all for now, cheers for reading
#5
Advanced PassionFord User
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Blackpool
Posts: 1,798
Likes: 0
Received 0 Likes
on
0 Posts
new bumper fitted, its not brand new, bought it from a local ford breakers and to be fair it looked crap when i picked it up, but in better condition than the one i already had on, so it was bought, took the cab home and took the bumper off, didnt expect to find what i found, but after a quick wipeover the area behind the bumper it looked like this:
gave the new bumper a good wash, took out god knows how many scratches, and then clayed and polished it, then fitted it:
my idea now is with getting a black roof, to have black bump strips instead of red, i think it will break up the colour nicely
with regards to news about the roof the car is booked in on the 16th for a brand new black mohair roof which is costing Ł380 fully fitted with new tensioning cables too, and my parents have decided that since its my 21st birthday this month that they're gonna pay for it for me as a present big weight off my mind
thats it up to now, updates when new roof is on
cheers, Dan.
gave the new bumper a good wash, took out god knows how many scratches, and then clayed and polished it, then fitted it:
my idea now is with getting a black roof, to have black bump strips instead of red, i think it will break up the colour nicely
with regards to news about the roof the car is booked in on the 16th for a brand new black mohair roof which is costing Ł380 fully fitted with new tensioning cables too, and my parents have decided that since its my 21st birthday this month that they're gonna pay for it for me as a present big weight off my mind
thats it up to now, updates when new roof is on
cheers, Dan.
#7
Advanced PassionFord User
Good progress mate.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM