fiesta rs turbo rust box getting lots of love / resto
11-11-2007, 05:13 PM
#1
PassionFord Regular
Thread Starter
Join Date: Sep 2005
Location: crawley sussex
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
fiesta rs turbo rust box getting lots of love / resto
my wife always wanted a turbo i found a j reg turbo going cheep because at one point the nearside front wheel come off and damaged the wing
this is a pick of it just after i got it
mot and tax run out in november so it was time to do it up
old wing
new wing fitted
removed all the body kit and what was found RUST
we are going to replace the other wing offside rear quorter and the nearside rear arch
also carry out some mods
this is how we left it to day i will get all the parts on order 2 mo
this is a pick of it just after i got it
mot and tax run out in november so it was time to do it up
old wing
new wing fitted
removed all the body kit and what was found RUST
we are going to replace the other wing offside rear quorter and the nearside rear arch
also carry out some mods
this is how we left it to day i will get all the parts on order 2 mo
12-11-2007, 08:49 PM
#3
PassionFord Regular
Thread Starter
Join Date: Sep 2005
Location: crawley sussex
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
it also needs rear flour pans both inner sills only part that dont need work is the roof and boot flour all parts on order will be with me twomorrow time for work then
Trending Topics
..
19-11-2007, 03:06 PM
#10
PassionFord Regular
Thread Starter
Join Date: Sep 2005
Location: crawley sussex
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
update it was a very long week end got it all done and in primer finished at 4am monday morning some pics for every one
removed nearside rear
inner sill was all good
so fitted the new panel and outer sill
all the old parts
on to the offside
at last all the metal work was done so we put in primer
this is as we left it more work soon i got to find a new nearside door and boot now let me know what you think
removed nearside rear
inner sill was all good
so fitted the new panel and outer sillall the old parts
on to the offside
at last all the metal work was done so we put in primer
this is as we left it more work soon i got to find a new nearside door and boot now let me know what you think
19-11-2007, 09:35 PM
#17
Too many posts.. I need a life!!
Excellant work matey
That rear inner o/s arch is in vgc, its another favourite rusting place.
When its painted get it pumped full of Waxoyl
Cheers
That rear inner o/s arch is in vgc, its another favourite rusting place.
When its painted get it pumped full of Waxoyl
Cheers
19-11-2007, 10:04 PM
#18
I must say if there was a race in bying a rust buchet stripping it down and putting it back to a car you would have 1st place in this one ( GOOD WORK MATE ) did you go into work today . I think i would be in bed all day ...O... if you get bord you can come round my house and help me out 
19-11-2007, 10:26 PM
#19
PassionFord Regular
Thread Starter
Join Date: Sep 2005
Location: crawley sussex
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by COLEYST200
I must say if there was a race in bying a rust buchet stripping it down and putting it back to a car you would have 1st place in this one ( GOOD WORK MATE ) did you go into work today . I think i would be in bed all day ...O... if you get bord you can come round my house and help me out
(and i dont work in a body shop)i got my self a new car so i dont have to do any work to it i got the s2 off
mercury grey minter
this is the last one we did for a mate its a mk1 caviler sports hatch we also fitted a c20let lump into it
this one took 4weeks all in run it down santa pod and doing 13.5 with fueling probs great fun
01-02-2010, 07:39 PM
#29
PassionFord Regular
Thread Starter
Join Date: Sep 2005
Location: crawley sussex
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
over due up date vehicle all done been on the road over a year now also done a t3 turbo conversion but time has come that my wife needs a bigger car so it must go what is the price they go for now days ???? rough guide only
Thread
Thread Starter
Forum
Replies
Last Post