F2 Maxi Build Lucifer II - refurbish and fit ATL fuel cell. New FibreGlass boot!!!!!

[Minirotty]

another pic just wanted to add in thread, finished building up coil overs today and was well chuffed with end result thanks to Tim for helping out with it also

If you were logged in, you wouldn't be seeing this ad! Register your free account today, or log in if you already have an account.

[Rides]

Nice one kev mate...would love a set of those for my RS2000,4x4... anyway kev bud have a great xmas all the best ..AL

[marco polo]

looking good kev happy christmas to you and the family


marco

[COLEYST200]

looking good mate its nice when you get some paint on the car for the first time . and which JAWEL did you go to as i use the one nere spaghetti junction this is wot i got when i did the under side of my 3dr

[Minirotty]

Collected the paint from Smethwick Coley mate only a little run across town from me

Originally Posted by Rides

Nice one kev mate...would love a set of those for my RS2000,4x4... anyway kev bud have a great xmas all the best ..AL

Thanks fella, you too

Originally Posted by marco polo

looking good kev happy christmas to you and the family


marco

Cheers mate, have to catch up after Christmas mate, may pop over when passing for a cuppa tea n biscuits

[Minirotty]

Been back at lock up today with Sam armed with a welder, plan was to fit seat bars and finish welding turrets in.

But realised some more had to be removed from floor pan, the original seat mounts etc were in the way as Sam said they would be lol

tucjk ages, when finshed gettin um out started to do turret and electric went up the lock up and by time got it fixed was knackered and went home lol

some pics -











Trial fitted seat before mounting bars welded in





more soon.

[GINGExR2 T]

Looking good, seats look very nice mate

[Minirotty]

Cheers bud

[Minirotty]

update - 99% finished ready for paint now, all internal floor work done today and also finished one of the turrets welding.

was quite hard to take pics of the seat bars as we had primerd and thiinly stone chipped the floor but heres a few of the floor -







then the what I though looked very sexy bit, seats in and mocked up with harnesses to check all positioning was corretc - looks ace!!!

harness bars are perfect -







then the very cool bit, seats.........










Seat positions taken from measuring sams rally shell, spot on I think.

getting there, more soon.

[Twins]

Looking good

[Minirotty]

Cheers bud

[Minirotty]

Look what I got through in the post today!







45mm Jenveys thanks to Gary for selling them

[Minirotty]

anyone know what BHP are cossy greys god for?

[steanlol]

my old one on greys was running 380bhp

[J1mbo]

Originally Posted by Minirotty

anyone know what BHP are cossy greys god for?

450hp

[Minirotty]

Nice one, they'll be staying then

[J1mbo]

if anything theyre tooo big mate ! but theyd do the job what power ya going for fella

[Minirotty]

na mate theyre fine, removed um from a maxi spec engine running 240 on pectal

I'll be runnign Omex and 300+ bud.

[J1mbo]

300+ n/a ?? an what engine is it ?

[Minirotty]

read the thread ya lazy cunt

[J1mbo]

type me the awnser, i dont do reading when half asleep

[Minirotty]

it's an I4 bud

brief spec

2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc

2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.

[16vzetec]

Originally Posted by Minirotty

it's an I4 bud

brief spec

2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc

2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.

the very last maxi's had 305bhp just before they were dropped for being to fast!

[J1mbo]

Originally Posted by 16vzetec

the very last maxi's had 305bhp just before they were dropped for being to fast!

they claimed 305 hp, just trying to think what inlets they were using, barrels or slides, i think it was slides they used on the late big power ones and were in the area of 285 bhp, they never made much more

there is lots of dyno sheets at work ill have to have a look through

think they changed the inlets from barrels to slides or vice versa dependant on the surface of the rally, gravel, tarmac

[J1mbo]

Originally Posted by Minirotty

it's an I4 bud

brief spec

2.2 stroker - 2.3 block, 2L Crank (steel or LnB Knife edged have both) LnB fly wheel, Steel rods, Cosworth forged pistons built to 13:1 c/r, 2L worked head, Maxi cams, adjustable cam sprockets, uprated springs, solid lifters, Pace Dry Sump, 4-1 manifold one off 2/12 to 3" bore, 45mm Jenveys etc etc

2L Maxi blocks ran 280 BHP, I'm building 2.2 stroker but with what I think is better spec than the maxi 2L and aiming for 300+.

sounds good mate be god to see it on a proper dyno to see what it really gives over a rolling road but all the same will be good to see !

[Minirotty]

they ran slides on the late ones, I doubt this'll make the power I want on it's first run out the box but it wont be shy either.

ill get the fucker to 300+ as ill develop it there as I know its achievable, if it wasnt i wouldn't be trying.

would have chosen slide for this but couldnt find any available but when a set comes up ill get um if possible at the time.

[Minirotty]

Update on parts not shell lol

Collected 9 x alloy wheels today for mine and Sams car - OZ Ford MotorSport Magnesium 18x8's

removed from Colin MrCaes works focus's.





Most have hair line cracks to rims so in need of repair but for what they cost theyre defo worth it.

also picked this up -





Spot whats missing from this rocker cover?

Oil filler cap - hasn't got one, was removed from this black cabby - I dont need oil filler as im runing dry sump!





running 2.3 scorpion engine on auto box factory fitted, another one off lol

Thanks to Paul for parts and going scrappy for me, cheers bud.

[.Ross.]

Top fooking Banana there KEV ...

Gonna be plenty of ...How you fill it with Oil? questions comming your way

[Minirotty]

I'll tell them it's a development engine that needs no oil

[Minirotty]

Better pics of the alloys, tuck um all up the unit.

Couple of lads found out I had them and asked for one for memorabelia (sp)purpuses lol I said piss off obviusly lol





also sorted out having them all repaired already but id like to have all stickers made up again as want them to look original.

[Minirotty]

A few pics of the focus in tarmac spec with wheels

[THEDMAN]

Are you sure the Works wheels are 108 PCD?

The centre bore is also massive compared to standard Ford!

[spudmurphy]

Were the wheels listed on ebay till recently?

Was gutted when the auction got pulled, was hoping for a last minute cheap ebay snipe lol

Cool project btw

Spud

[caprizetec170]

ya sure those wheels will fit do a bit of work on rally cars seen some of these and seem more like 120 pcd and 90 mm center bore

[Minirotty]

Originally Posted by spudmurphy

Were the wheels listed on ebay till recently?

Was gutted when the auction got pulled, was hoping for a last minute cheap ebay snipe lol

Cool project btw

Spud

they were, i went to collect another part off of the seller and saw these in his garden so had um

not sure if I can get um to fit onto this car as yet but if it proves to much work ill fit them to my other RS

[cossiedevil]

As said on another site love them rims and nice progress.Getting mad looking at all these updates and unable to do anything on my own rs

[Minirotty]

lol cheers bud but I'm sure once your new garage is built you'll crack on and get loads more than me done

[Stolton]

Looks a wicked project mate

[COCHYN]

Christ, ET57!

[Minirotty]

Originally Posted by JamSportSeries2

Looks a wicked project mate

Thank you