mk3 escort,2 litre zt 28/3/2010. geting pissed off now still no spark

[danny_boy699]

well been cracking on slowly give the block another coat of green painted sump and refitted it so the bottom end is all built up just waiting for for the misses to get up and take my for my fly wheel then i can get the block fited in the car this is the little shed i have been building it in lol block back on the sump waiting for flywheel so far so good

If you were logged in, you wouldn't be seeing this ad! Register your free account today, or log in if you already have an account.

[hai07222]

Coming together now. keep the updates coming

[danny_boy699]

cheeRS fella got the old cvh out just cleaning the bay up in parts then i put the block in

[danny_boy699]

few pics of the engine being riped out and konis fited













hope to pick my flywheel up tomorrow

[danny_boy699]

well got fly wheel so hoping to fit block some time this week

[danny_boy699]

flywheel on block so will get the block fited today

some pics of the car i found

inner wings painted


back box

[danny_boy699]

bottom end fited in the car will get some pics up later

[danny_boy699]

little update all rear end bits done like rs turbo swing arms and that all rear to fit and i have to finsih painting my rs7 soft spoke to go on al so painted bonnet stay sliver











wheels for it when i first got them for a bargian price of Ł50, now been refurberd just 1 left to do, if i don't like the look of them i sell them and buy some cossie rims

[fezzajsy]

[danny_boy699]

well fitted all rear swing arms had to drill the rear cross member to fit roll bar witch was a cunt, but got there in the end just waiting for a tank then i drop it back down on it's wheels, no pics as i wasn't planing on do this today

soft spoke mite be fore sale want some escort cossie rims

[rostill2007]

how much you want for the rims

[danny_boy699]

dunno mate seen them for sale on here for Ł450 but not that robing as they still need tryes

[danny_boy699]

little update got all my rear disc conversion kit and rover inlet manifold, and a few pics of how it is looking

[danny_boy699]

made this last night as i was bored need to blend it all in yet though

[danny_boy699]

done abit more to my gauge pod now looks like this



and rear disks brackets fitted

[Rs Adz]

were did u get your rear anti roll bar and arms from and was it a big job 2 drill and fit as i will have 2 do this when i find some for mine

[rst in breaking]

i wouldn't mind seeing some pics of the rear roll bar setup aswell please mate as i dont have one on mine lol

[danny_boy699]

mine is just a s2 turbo set up.

fited it all wrong at the moments need to swap and left arm and right arm round

it wasn't a bit job biggest job was drilling the rear xmemeber to bolt the roll bar too. 1 side was easy but drivers side was a cunt coz of the spare wheel well

i get a pic up tomorrow

[danny_boy699]

havn't updated this for a while as, been spending money on other stuff and shit like that

all rear discs fited just waiting for handbrake cable and pad to come in




paul mate i get u a pic of rear roll bar set up later forgot all about it and not realy done much to the car

[danny_boy699]

just finished my top cowling gauge pod painted it black but think it needs to be grey

[woolford]

looking good there.. just a question why use a 4door??

[danny_boy699]

diffrent realy mate, and the car has never seen a welder yet.

bought a rover inlet off clarke5700 thought ebay, will be paying for that tomorrow, seconed 1 i bought as the first 1 never showed up and the guy has vanished off the earth, should be geting a loan next week to buy my turbo off paul (rst in making) so fingers crossed i get it nack on the road for summer

[hai07222]

Good work, keep the updates coming

[danny_boy699]

thanks mate, will try to get some pics of the car tomorrow, as i gonna put it back on all 4's and get it moving

[Glenn.]

That looks spot on mate,keep up the good work.It would be nice to see it at a scotch corner meet some time.

[ShandzS1]

Good project!! How are u lowering the CR and what managment u going for?

[danny_boy699]

lowing the cr with a decomp plate for now, as money is tight but will probley get some pistons before it sees the road, managment wise gonna run mega squirt

[sexr3i]

get it all up and running and play with the mgment with the decomp and a std t3 mate so if you have problems and melt something it won't cost a fortune. Then when you've got to grips with it drop your expensive lump and big turbo in together.

[danny_boy699]

was gonna but still waiting for my decompe plate to come back so mite just put some pistons in it

[stembo21]

looks good mate keep the good work up

[danny_boy699]

today i put it back on it wheels and bled the brakes had to fit a new pipe as it started to leak

[danny_boy699]

got my inlet the other day and exhaust and inlet manifold studs, so heads off geting drilled and taped, got my decompe plate back but they can#t do out with it and they want Ł115 for a new 1 to be made, so bought another 1 off ebay, mite get it done 1 day

[danny_boy699]

pics i got off the bits so far

[danny_boy699]

well found out i got the wrong studs i got m10's not m8's so just bought some more off ebay, so once they come i get on bolting it all back together

[clarke5700]

please buy a good camra

[danny_boy699]

nowt wrong with the camra just i fucked about with it and got it a bit funny

[Ade]

Coming along nicely. Love the fact that it's a 5 door too!

[danny_boy699]

thanks ade, yeah i love that fact too, something abit diffrent but can all so take the family out 2 if i ever do have a kid

[danny_boy699]

well got my exhaust studs so i can do some work lol, will get a update tomorrow

[jonnyrsturbo]

lookin goooooood mate