FRST saved from the scrappy(now with seafront picture added)
#1
Too many posts.. I need a life!!
Thread Starter
FRST saved from the scrappy(now with seafront picture added)
after a year driving a snotter of a Sierra, my FRST project is beginning to get off the ground.
this last week or so have seen a great deal of phone calls and e-mails, ordering bits that i need, and the car has been stripped and collected.
so far, the postman/courier has brought me...
GAZ coil overs
powerflex polybushes
pro alloy intercooler and rad
samco boost and water hoses
bailey oil breather, swirl pot and header tank
wilwood 283mm discs and 4pot calipers
braided brake line kit
k&n induction kit
mongoose exhaust
4 brand new 16" mondeo Si alloys
burton quickshift
mk3.5 mirrors
LHD rear lights
clear indicators and repeaters
front and rear strut braces
stainless oil filler cap
escos gear knob
vibratechnic gearbox mounts
omex shift light
AP uprated clutch
just waiting for CTS stage 2 box (will be a week or two)
need some welding, then spraying.
a mate (Dave J) is doing most of it for me, except the spraying.
and i will be helping/hindering/making the tea as needed.
just wanted to thank everybody thats helped me out on here so far, and thanks to paul at burton, dave at dampertech, fordpartsuk.com, adel28 (ebay),stu at CTS, christian@APT,steveC, auto specialists in grays and of course... The Wife!
will post pictures when i have sorted the mysteries of photobucket
wish me luck!
this last week or so have seen a great deal of phone calls and e-mails, ordering bits that i need, and the car has been stripped and collected.
so far, the postman/courier has brought me...
GAZ coil overs
powerflex polybushes
pro alloy intercooler and rad
samco boost and water hoses
bailey oil breather, swirl pot and header tank
wilwood 283mm discs and 4pot calipers
braided brake line kit
k&n induction kit
mongoose exhaust
4 brand new 16" mondeo Si alloys
burton quickshift
mk3.5 mirrors
LHD rear lights
clear indicators and repeaters
front and rear strut braces
stainless oil filler cap
escos gear knob
vibratechnic gearbox mounts
omex shift light
AP uprated clutch
just waiting for CTS stage 2 box (will be a week or two)
need some welding, then spraying.
a mate (Dave J) is doing most of it for me, except the spraying.
and i will be helping/hindering/making the tea as needed.
just wanted to thank everybody thats helped me out on here so far, and thanks to paul at burton, dave at dampertech, fordpartsuk.com, adel28 (ebay),stu at CTS, christian@APT,steveC, auto specialists in grays and of course... The Wife!
will post pictures when i have sorted the mysteries of photobucket
wish me luck!
Trending Topics
#9
Too many posts.. I need a life!!
Thread Starter
Originally Posted by Twins
Nice to see you have started a resto thread ,dont worry its in good hands with Dave
showed my dad, he nearly cried
will post photos soon, visiting tomorrow morning.
dave has a mk3.5 quarter for it. flap, neck etc, all there.
and the side stripes are definitely going!
#11
Too many posts.. I need a life!!
Thread Starter
f#ck me, it does!!!
above is a rusty quarter and inner. all you could see was a couple of bubbles around the cap when i bought it!
some more...
most of quarter gone
what have they done!?
above is a rusty quarter and inner. all you could see was a couple of bubbles around the cap when i bought it!
some more...
most of quarter gone
what have they done!?
#16
Too many posts.. I need a life!!
Thread Starter
Originally Posted by Twins
Popped over this eve ,nice to see the quarter on
wifey came round, and said "it looks terrible, doesn't it?"
that was AFTER dave had the new quarter clamped on! should have seen the look on her face when he took it back off to show her what it looked like before!
i stripped the inners from the donor tailgate to stop myself feeling inadequate!
#21
Too many posts.. I need a life!!
Thread Starter
Originally Posted by xr2i-carl
quarter off another car??? or new one been painted silveR?
got one off a mk3.5 at TWINS suggestion, so will soon have a filler FLAP!
not seen another turbo with this, has anyone out there?
#24
Keep up the good work monkey boy (sorry did I say work I meant tea making!)
Why havent you posted a picture of the shiny rs blanking plate yet! That was the best bit!!
I am so tempted to post something "outlandish"............. but I won't (for now) as I expect you are a well respected member of this forum and I wouldn't want to tarnish your reputation
Why havent you posted a picture of the shiny rs blanking plate yet! That was the best bit!!
I am so tempted to post something "outlandish"............. but I won't (for now) as I expect you are a well respected member of this forum and I wouldn't want to tarnish your reputation
#25
Too many posts.. I need a life!!
Thread Starter
i will just point out that "japtastic spams" sig refers to his twin turbo supra
and obviously, everyone knows i'm not respected on this (or any other) forum...
and obviously, everyone knows i'm not respected on this (or any other) forum...
#27
Originally Posted by vx220
I will just point out that "japtastic spams" sig refers to his twin turbo supra
Just so you all know.........
1) I Drive a 9 foot wide jap whale (aka supra TT) made in Tokyo, which is nowhere near Dagenham.
2) I live in Kent not Essex
3) I worked with "vx220" for 3 years and yes infact he is a mentalist
I am going to be so popular here.......
#29
PassionFord Post Whore!!
Join Date: May 2003
Location: ESSEX
Posts: 6,467
Likes: 0
Received 0 Likes
on
0 Posts
i dontlike the 'flap' because its just not original!!!
dont get me wrong it is a bloody good idea, but if new quarter goin on anyhow and you dont spill petty on it, it should last 10 years
dont get me wrong it is a bloody good idea, but if new quarter goin on anyhow and you dont spill petty on it, it should last 10 years
#30
Originally Posted by xr2i-carl
i dontlike the 'flap' because its just not original!!!
GAZ coil overs
powerflex polybushes
pro alloy intercooler and rad
samco boost and water hoses
bailey oil breather, swirl pot and header tank
wilwood 283mm discs and 4pot calipers
braided brake line kit
k&n induction kit
mongoose exhaust
4 brand new 16" mondeo Si alloys
burton quickshift
mk3.5 mirrors
LHD rear lights
clear indicators and repeaters
front and rear strut braces
stainless oil filler cap
escos gear knob
vibratechnic gearbox mounts
omex shift light
Personally I think its a nice subtle mod
#32
Too many posts.. I need a life!!
Thread Starter
Originally Posted by xr2i-carl
i dontlike the 'flap' because its just not original!!!
dont get me wrong it is a bloody good idea, but if new quarter goin on anyhow and you dont spill petty on it, it should last 10 years
dont get me wrong it is a bloody good idea, but if new quarter goin on anyhow and you dont spill petty on it, it should last 10 years
something to do with ford using a thin squirt of rust preventer that completely failed to go anywhere near where the water would drain and get trapped!
with any luck, this car will be swimming in waxoyl or similar very soon
#35
Looking good dave! How long before its road worthy?
I thought that was cliff with the angle grinder at first in the 6th pic!
btw, I think you need to invest in axle stands! Im not sure what will break first, the chassis or the jack
Jack (another ex-colleague of vx220 )
I thought that was cliff with the angle grinder at first in the 6th pic!
btw, I think you need to invest in axle stands! Im not sure what will break first, the chassis or the jack
Jack (another ex-colleague of vx220 )
#37
Too many posts.. I need a life!!
Thread Starter
Originally Posted by Jack155Q4
btw, I think you need to invest in axle stands! Im not sure what will break first, the chassis or the jack
#38
Originally Posted by Jack155Q4
Looking good dave! How long before its road worthy?
I thought that was cliff with the angle grinder at first in the 6th pic!
btw, I think you need to invest in axle stands! Im not sure what will break first, the chassis or the jack
Jack (another ex-colleague of vx220 )
I thought that was cliff with the angle grinder at first in the 6th pic!
btw, I think you need to invest in axle stands! Im not sure what will break first, the chassis or the jack
Jack (another ex-colleague of vx220 )
My god it is cliff!!........In about 20 years time!
WE NEED MORE PICS!!! vx220
#39
Originally Posted by vx220
Originally Posted by Jack155Q4
btw, I think you need to invest in axle stands! Im not sure what will break first, the chassis or the jack