My new mk4 fiesta zetec turbo project! update 10/10/07
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
My new mk4 fiesta zetec turbo project! update 10/10/07
Hi peeps!
after i sold my 3 year rs turbo project earlier this year due to being bored and fed up with chasing rust! oh and moving out of home with my mrs, and belive me im never moving back home!
im the last 6 months of not having a toy i went out and bought a nove 1.4 delux plus with a 2.0 16 valve red top lump fitted but after gettin it home and putting it in the garage i got bored so i sold it and wanted to keep in the rs ownership circle. So i bought a rs2000 4x4 on a n reg, it had a fooked transfer box and after i found one i drove it for a week and got really really bored so it had to go!
i moved in my bungalow and the past three weeks i ve been getting settled, i ve decided to get a new project! its not going to be an over night project due to not having as much dollar as when i lived at home but i intend to have it finished for next summer and have some fun doing track days and attending shows!
a few pics of the nova
here s the fiesta as it stands before i rip to pieces
hope you like
the wheels are comin off to be refurbed i might change the colour and new tyres as i want a nice set of yokahama pradas!
as for spec
its a series 3 zetec black top
1800cc
low comp pistons
focus t190 cams
arp rod bolts
t190 t25 turbo and manifold
lumanition engine management(going in the bin)
3 inch bore exhaust
ap clutch
siemens injectors
lightened and balanced
its got kw coilovers
2wd cosworth front brakes
i got loads of plans but in need to get it stripped and ill see what ill keep and what ill sell!
any comments will be much appreciated!
after i sold my 3 year rs turbo project earlier this year due to being bored and fed up with chasing rust! oh and moving out of home with my mrs, and belive me im never moving back home!
im the last 6 months of not having a toy i went out and bought a nove 1.4 delux plus with a 2.0 16 valve red top lump fitted but after gettin it home and putting it in the garage i got bored so i sold it and wanted to keep in the rs ownership circle. So i bought a rs2000 4x4 on a n reg, it had a fooked transfer box and after i found one i drove it for a week and got really really bored so it had to go!
i moved in my bungalow and the past three weeks i ve been getting settled, i ve decided to get a new project! its not going to be an over night project due to not having as much dollar as when i lived at home but i intend to have it finished for next summer and have some fun doing track days and attending shows!
a few pics of the nova
here s the fiesta as it stands before i rip to pieces
hope you like
the wheels are comin off to be refurbed i might change the colour and new tyres as i want a nice set of yokahama pradas!
as for spec
its a series 3 zetec black top
1800cc
low comp pistons
focus t190 cams
arp rod bolts
t190 t25 turbo and manifold
lumanition engine management(going in the bin)
3 inch bore exhaust
ap clutch
siemens injectors
lightened and balanced
its got kw coilovers
2wd cosworth front brakes
i got loads of plans but in need to get it stripped and ill see what ill keep and what ill sell!
any comments will be much appreciated!
#4
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
Turbo-Beal
cheers
boy_racer2f2f
compomotive th fella!
they have the wrong tyres on them so they sit poo on the car!
a have also ordered new higher poundage springs for it so it will sit better as the coilovers are at its highest settings due to the zetec turbo engine being hevier than the 1.25 it had at the start!
cheers
boy_racer2f2f
compomotive th fella!
they have the wrong tyres on them so they sit poo on the car!
a have also ordered new higher poundage springs for it so it will sit better as the coilovers are at its highest settings due to the zetec turbo engine being hevier than the 1.25 it had at the start!
#5
PassionFord Post Whore!!
iTrader: (2)
im doing some thing with my mk4 at the mo (see project free fiesta)
could you do me a massive favour and send me pics of the engine mounts and gear box mounts, or tell me what mounts thay are, also, any parts your thinking of selling, let me no mate
cheers, leee
ps lovely car mate
could you do me a massive favour and send me pics of the engine mounts and gear box mounts, or tell me what mounts thay are, also, any parts your thinking of selling, let me no mate
cheers, leee
ps lovely car mate
#6
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
zippyobrien
it uses a series 3 engine(black top mondeo and focus)
it uses the focus engine mount that sits in the middle of the cambelt cover!
ill be selling the turbo and down pipe
the management
inlet manifold and injectors
engine
pretty much most of it as i got bigger things to go on it!
it uses a series 3 engine(black top mondeo and focus)
it uses the focus engine mount that sits in the middle of the cambelt cover!
ill be selling the turbo and down pipe
the management
inlet manifold and injectors
engine
pretty much most of it as i got bigger things to go on it!
Trending Topics
#16
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zippyobrien
dont suppose you no where to get the arch extensions mate, there mint
#21
hey ya - nice motor that cant understand why you would want to strip it
question if you dont mind
what did you do for the loom did you use the existing 1.25 loom and use a management with it
or did you rip out the 1.25 engine loom and apply a zetec loom to match the engine etc
did you have a management put in for it etc eg omex - sorry i am carrying out something similar myself
really like it tho - job well done
ta
question if you dont mind
what did you do for the loom did you use the existing 1.25 loom and use a management with it
or did you rip out the 1.25 engine loom and apply a zetec loom to match the engine etc
did you have a management put in for it etc eg omex - sorry i am carrying out something similar myself
really like it tho - job well done
ta
#22
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
alright peeps
been busy the past few weeks with work but i got a few hours to strip the fiesta!
heres some pics!
pics i took tonight
i still got loads more stripping to do!
it looks a mess but its all being put in the bin and all new stuff fitted!
got to get it bare for when it goes off for paint, also i got loads of new parts i ve been collecting, ill post em up in the week!
comments appreciated!
been busy the past few weeks with work but i got a few hours to strip the fiesta!
heres some pics!
pics i took tonight
i still got loads more stripping to do!
it looks a mess but its all being put in the bin and all new stuff fitted!
got to get it bare for when it goes off for paint, also i got loads of new parts i ve been collecting, ill post em up in the week!
comments appreciated!
#29
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
cheers for the comments!
i ve sold the 1800 lump and all the ancilleries!
i got a 2000 lump freahly built!
im aiming for 350 bhp safely!
i ve sold the 1800 lump and all the ancilleries!
i got a 2000 lump freahly built!
im aiming for 350 bhp safely!
#31
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
hi peeps
here is a big update so far sorry for the delay im just gettin straight in me new place!
so far i ve been collectin parts and organisin fabrication work!
here s the first pic!
i went up to cobra s main factory last week and picked a pair of seats and all the trimmings! i didnt want to wait and i got to pick a perfect set and got a super deal on them! enough chat heres some pics
they are a set of cobra sazuka fia seats with alloy side mount and custom subframes, with fia 4 point harnesses!
here are a couple of pics of my als throttle body, its got a modded iscv and a pf09 tps
here is a couple of pics of my rs turbo limited slip diff, cant say much but all will be revealed soon
here is one of my piston and rod (focus central and eagle steel rod(ill keep ya posted on the engine build but i dont want to give to much away!)
here is some parts to my management for the engine (new set of greens and a 3 bar map sensor and below that is my anti lag board) i cant wait
here is my b&m quickshift
here is my intercooler, needs a few mods
here is a pic of the box before it gets sent of for some heavy moddin! the same as the diff ill keep ya posted!!
what ya think???
here is a big update so far sorry for the delay im just gettin straight in me new place!
so far i ve been collectin parts and organisin fabrication work!
here s the first pic!
i went up to cobra s main factory last week and picked a pair of seats and all the trimmings! i didnt want to wait and i got to pick a perfect set and got a super deal on them! enough chat heres some pics
they are a set of cobra sazuka fia seats with alloy side mount and custom subframes, with fia 4 point harnesses!
here are a couple of pics of my als throttle body, its got a modded iscv and a pf09 tps
here is a couple of pics of my rs turbo limited slip diff, cant say much but all will be revealed soon
here is one of my piston and rod (focus central and eagle steel rod(ill keep ya posted on the engine build but i dont want to give to much away!)
here is some parts to my management for the engine (new set of greens and a 3 bar map sensor and below that is my anti lag board) i cant wait
here is my b&m quickshift
here is my intercooler, needs a few mods
here is a pic of the box before it gets sent of for some heavy moddin! the same as the diff ill keep ya posted!!
what ya think???
#33
Regular Contributor
Join Date: Nov 2004
Location: Essex
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
so can i confirm that the only changed engine mount is the top drivers side one? and is that a mtx75 gearbox on the standard mounts? looks good, would like to do somethin similar with my zs but thought the zetec lump was a git to get in
#40
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
keep it goin mate, your doin well so far. need to talk to u soon about big power engine build for mine. Remem what u said to me bout havin car on road but havin another engine that i can be building