My Mk2 Fiesta Area Six Exhaust Manifold *12/12/11* Page 7 - Page 7

Brian · 11-06-2010, 08:34 AM

Cheers Raj

Could you PM me how much you would charge to flock a full XR2 dash? Am thinking maybe a 2 tone main bit of dash black and the bit in the picture above maybe a grey?

Brian

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

Brian · 30-06-2010, 08:15 PM

UPDATE 30/06/10
Spent a few hours on the car again today managed to remove the sound deading pads from the boot floor, also made a start removing the seam sealer in the boot area and removed a few un wonted brackets also found some rust in both corners of the boot

And one of my dash and gauges fitted

Brian

Brian · 02-07-2010, 07:57 AM

**UPDATE 01/07/10**
Started off today by fitting the alternator first i had to remove the base model tie bar bracket
From this

To this

A XR2 tie bar bracket
With that sorted i made a start stripping the under side
From this

To this

All so done abit more on the inside

And a few of the whole car

Thats it for today

Brian

Twins · 02-07-2010, 11:44 AM

Brian · 31-10-2010, 09:54 AM

UPDATE 31/10/10

Not done much to the car over the last few weeks but i did win this on ebay a few weeks ago

A Pace reverse charge carrier

, been told there quite rare

:

Only a small update after seeing Mart's (xrt-mart) adaptor he was using to allow him to run a FRST TPS on the zetec throttle body i asked him if he could get me one made up which he did thanks to Shaun (Newrick) who actually made it
Here's a few picture's (i still need to drill 2 holes to bolt it to the throttle body and
also get hold of a FRST TPS

Sorry about the crappy phone pictures

Brian

jamie rst · 31-10-2010, 10:39 AM

Looking good pal

marky_g · 31-10-2010, 12:36 PM

pace is cross over is like rocking horse shit mate def help you out with on the single pass inter cooler you have

Brian · 31-10-2010, 09:42 PM

Quote:

Originally Posted by jamie rst

Looking good pal

Cheer's mate

Brian

Brian · 31-10-2010, 09:44 PM

Quote:

Originally Posted by marky_g

pace is cross over is like rocking horse shit mate def help you out with on the single pass inter cooler you have

I thought they was rare wont say what i paid for it

Brian

Brian · 27-12-2010, 05:00 PM

Update Airtec Radiator 27/12/81

Got a Airtec radiator for christmas so today i went and fitted to see what it looked like

Picture with a intercooler fitted (not sure if i am keeping this one)

Brian

Twins · 27-12-2010, 05:58 PM

looking good

Brian · 27-12-2010, 06:17 PM

Thanks mate

Brian

jamie rst · 27-12-2010, 06:43 PM

Looking nice mate

turbo looks like it will be close to the rad

and get a bigger cooler on it you know you want to lol

Brian · 27-12-2010, 07:07 PM

Thanks mate

The turbo is going to be mounted above the gearbox

Brian

jamie rst · 27-12-2010, 09:48 PM

NICE

Glenn. · 27-12-2010, 10:46 PM

Wow thats looking well cool.Keep up the good work.

xeonxr6 · 27-12-2010, 10:58 PM

Quote:

Originally Posted by Brian

Thanks mate

The turbo is going to be mounted above the gearbox

Brian

orly? should we be expecting an Area Six manifold?

Brian · 27-12-2010, 11:11 PM

Quote:

Originally Posted by jamie rst

NICE

Thanks mate

Brian

Brian · 27-12-2010, 11:12 PM

Quote:

Originally Posted by Glenn.

Wow thats looking well cool.Keep up the good work.

Cheer's mate

Brian

Brian · 27-12-2010, 11:15 PM

Quote:

Originally Posted by xeonxr6

orly? should we be expecting an Area Six manifold?

Yes mate possilby

Brian

xeonxr6 · 27-12-2010, 11:17 PM

Come on spill! Do you already have one? lol

Brian · 27-12-2010, 11:25 PM

Quote:

Originally Posted by xeonxr6

Come on spill! Do you already have one? lol

No not yet mate

Brian

Brian · 04-01-2011, 08:51 PM

Another update 4/1/11
I bought this 6 paddle clutch off Rob-tt which he used in his Zetec Turbo mk2

I also got a Focus RS breather to as mine was blocked off

Brian

dingla rs · 05-01-2011, 12:02 AM

looking good pal nice project

Brian · 05-01-2011, 03:18 PM

Thanks mate

Brian

me_again · 05-04-2011, 07:47 PM

Looking good mate will have to pop round some time to have a look

Brian · 26-11-2011, 09:50 AM

**SMALL UPDATE 26TH NOVEMBER 2011**
I bought these Gaz Gold coilovers with remote resvouirs

Not the best pictures as taken on my phone
Should have a bit of a engine update next week
Brian

fezzajsy · 26-11-2011, 09:54 AM

looking good mate

Brian · 26-11-2011, 10:01 AM

Quote:

Originally Posted by fezzajsy

looking good mate

Thanks mate

Brian

Matty B898 · 28-11-2011, 12:23 PM

Top work fella.

Love the Gaz coilovers with remote res.

Twins · 28-11-2011, 05:16 PM

james kiely · 28-11-2011, 05:28 PM

looks great brian

are the cannisters retro fitted or can you buy them like that?

Brian · 28-11-2011, 06:54 PM

Quote:

Originally Posted by Matty B898

Top work fella.

Love the Gaz coilovers with remote res.

Cheer's mate

they do look pretty trick

Quote:

Originally Posted by Twins

Thanks mate

Quote:

Originally Posted by james kiely

looks great brian

are the cannisters retro fitted or can you buy them like that?

Thanks mate, tbh i am not sure i bought them from ebay like it, they come off a xr2 race car

Brian

Matty B898 · 29-11-2011, 09:05 AM

Quote:

Originally Posted by james kiely

looks great brian

are the cannisters retro fitted or can you buy them like that?

I recon Gaz would be able to make you a set. I'm going to contact them about a set for the mk1 fez.

Brian · 05-12-2011, 01:03 PM

Probably mate, i need to speak to them as wont these all check refurbed before i fit them

Brian

chrisxr2it3 · 05-12-2011, 06:39 PM

looking good mate

Brian · 05-12-2011, 08:39 PM

Quote:

Originally Posted by chrisxr2it3

looking good mate

Cheer's Chris

Brian

Brian · 12-12-2011, 09:14 PM

** UPDATE 12/12/11**
Area Six Exhaust manifold i ordered this a few weeks ago from Ian with the Help of Rob-tt (Cheer's for the pictures mate)

Will get some more pictures over the next few days when i hopefully get to fit it to the engine

Brian

chrisxr2it3 · 12-12-2011, 09:28 PM

very nice mate just need that gt28 you mentiond i no where you can bolt your t34

Brian · 12-12-2011, 09:32 PM

Cheer's Chris yeah mate i do but would need to sell my T34 first

Brian

30-06-2010, 08:15 PM	#242
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	UPDATE 30/06/10 Spent a few hours on the car again today managed to remove the sound deading pads from the boot floor, also made a start removing the seam sealer in the boot area and removed a few un wonted brackets also found some rust in both corners of the boot And one of my dash and gauges fitted Brian __________________

02-07-2010, 07:57 AM	#243
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	UPDATE 01/07/10 Started off today by fitting the alternator first i had to remove the base model tie bar bracket From this To this A XR2 tie bar bracket With that sorted i made a start stripping the under side From this To this All so done abit more on the inside And a few of the whole car Thats it for today Brian __________________

02-07-2010, 11:44 AM	#244
Twins 15K+ Super Poster!! Garage is empty, add now Trader Score: (14) Join Date: Sep 2004 Location: ESSEX Posts: 15,590 Rep Power: 23	__________________ My carbon clad s2

31-10-2010, 09:54 AM	#245
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	UPDATE 31/10/10 Not done much to the car over the last few weeks but i did win this on ebay a few weeks ago A Pace reverse charge carrier , been told there quite rare : Only a small update after seeing Mart's (xrt-mart) adaptor he was using to allow him to run a FRST TPS on the zetec throttle body i asked him if he could get me one made up which he did thanks to Shaun (Newrick) who actually made it Here's a few picture's (i still need to drill 2 holes to bolt it to the throttle body and also get hold of a FRST TPS Sorry about the crappy phone pictures Brian __________________

31-10-2010, 10:39 AM	#246
jamie rst Too many posts.. I need a life!! Garage is empty, add now Trader Score: (1) Join Date: Sep 2005 Location: Nottingham Posts: 943 Rep Power: 7	Looking good pal __________________ www.oddkiddcreations.co.uk

31-10-2010, 12:36 PM	#247
marky_g Fleet Manager Garage is empty, add now Trader Score: (0) Join Date: Aug 2004 Location: Thurrock Essex Posts: 5,351 Rep Power: 13	pace is cross over is like rocking horse shit mate def help you out with on the single pass inter cooler you have __________________ Click to see my RS Turbo project http://passionford.com/forum/showthr..._g#post3406438

27-12-2010, 05:00 PM	#250
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Update Airtec Radiator 27/12/81 Got a Airtec radiator for christmas so today i went and fitted to see what it looked like Picture with a intercooler fitted (not sure if i am keeping this one) Brian __________________

27-12-2010, 05:58 PM	#251
Twins 15K+ Super Poster!! Garage is empty, add now Trader Score: (14) Join Date: Sep 2004 Location: ESSEX Posts: 15,590 Rep Power: 23	looking good __________________ My carbon clad s2

27-12-2010, 06:17 PM	#252
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Thanks mate Brian __________________

27-12-2010, 06:43 PM	#253
jamie rst Too many posts.. I need a life!! Garage is empty, add now Trader Score: (1) Join Date: Sep 2005 Location: Nottingham Posts: 943 Rep Power: 7	Looking nice mate turbo looks like it will be close to the rad and get a bigger cooler on it you know you want to lol __________________ www.oddkiddcreations.co.uk

27-12-2010, 07:07 PM	#254
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Thanks mate The turbo is going to be mounted above the gearbox Brian __________________

27-12-2010, 09:48 PM	#255
jamie rst Too many posts.. I need a life!! Garage is empty, add now Trader Score: (1) Join Date: Sep 2005 Location: Nottingham Posts: 943 Rep Power: 7	NICE __________________ www.oddkiddcreations.co.uk

27-12-2010, 10:46 PM	#256
Glenn. Professional Waffler Garage is empty, add now Trader Score: (1) Join Date: Jul 2006 Location: Darlington county durham Posts: 27,880 Rep Power: 33	Wow thats looking well cool.Keep up the good work. __________________ NORTHEAST/NORTH YORKSHIRE ALL FORD MEET ORGANISER pm for details.

27-12-2010, 11:17 PM	#261
xeonxr6 15000 Garage is empty, add now Trader Score: (0) Join Date: Feb 2010 Location: doncaster Posts: 26 Rep Power: 0	Come on spill! Do you already have one? lol Last edited by xeonxr6; 27-12-2010 at 11:21 PM.

04-01-2011, 08:51 PM	#263
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Another update 4/1/11 I bought this 6 paddle clutch off Rob-tt which he used in his Zetec Turbo mk2 I also got a Focus RS breather to as mine was blocked off Brian __________________

05-01-2011, 12:02 AM	#264
dingla rs PassionFord Post Whore!! Garage is empty, add now Trader Score: (1) Join Date: Jun 2009 Location: catterick/sunny yorkshire Posts: 5,662 Rep Power: 8	looking good pal nice project __________________ loysport http://www.bafabrications.co.uk/ PM MONSTER FOR CUSTOM VIN TAGS carpartsexpress mail order ford parts 01914272186

05-01-2011, 03:18 PM	#265
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Thanks mate Brian __________________

05-04-2011, 07:47 PM	#266
me_again Wahay!! I've lost my Virginity!! Garage is empty, add now Trader Score: (0) Join Date: Jan 2007 Location: essex Posts: 94 Rep Power: 6	Looking good mate will have to pop round some time to have a look

26-11-2011, 09:50 AM	#267
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	SMALL UPDATE 26TH NOVEMBER 2011 I bought these Gaz Gold coilovers with remote resvouirs Not the best pictures as taken on my phone Should have a bit of a engine update next week Brian __________________

26-11-2011, 09:54 AM	#268
fezzajsy 10K+ Poster!! Garage is empty, add now Trader Score: (9) Join Date: Nov 2004 Location: jeRSey..isles Posts: 12,466 Rep Power: 20	looking good mate __________________ http://passionford.com/forum/restora...y-tidy-up.html

28-11-2011, 12:23 PM	#270
Matty B898 Part of the Furniture 1983 Ford Fiesta Trader Score: (0) Join Date: Nov 2007 Location: kent Posts: 150 Rep Power: 5	Top work fella. Love the Gaz coilovers with remote res.

28-11-2011, 05:16 PM	#271
Twins 15K+ Super Poster!! Garage is empty, add now Trader Score: (14) Join Date: Sep 2004 Location: ESSEX Posts: 15,590 Rep Power: 23	__________________ My carbon clad s2

28-11-2011, 05:28 PM	#272
james kiely PassionFord Post Whore!! Garage is empty, add now Trader Score: (3) Join Date: Feb 2008 Location: ireland Posts: 5,927 Rep Power: 10	looks great brian are the cannisters retro fitted or can you buy them like that? __________________ cheers james

05-12-2011, 01:03 PM	#275
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Probably mate, i need to speak to them as wont these all check refurbed before i fit them Brian __________________

05-12-2011, 06:39 PM	#276
chrisxr2it3 Wahay!! I've lost my Virginity!! Garage is empty, add now Trader Score: (1) Join Date: Jul 2009 Location: romford essex Posts: 87 Rep Power: 3	looking good mate __________________

12-12-2011, 09:14 PM	#278
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	UPDATE 12/12/11 Area Six Exhaust manifold i ordered this a few weeks ago from Ian with the Help of Rob-tt (Cheer's for the pictures mate) Will get some more pictures over the next few days when i hopefully get to fit it to the engine Brian __________________

12-12-2011, 09:28 PM	#279
chrisxr2it3 Wahay!! I've lost my Virginity!! Garage is empty, add now Trader Score: (1) Join Date: Jul 2009 Location: romford essex Posts: 87 Rep Power: 3	very nice mate just need that gt28 you mentiond i no where you can bolt your t34 __________________

12-12-2011, 09:32 PM	#280
Brian 10K+ Poster!! Garage is empty, add now Trader Score: (2) Join Date: Aug 2003 Location: Essex Posts: 10,261 Rep Power: 19	Cheer's Chris yeah mate i do but would need to sell my T34 first Brian __________________

12-12-2011, 09:32 PM
PassionFord Ford Focus Paid Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode