Lots Of Aeroquip Fittings - BRAND NEW!!!

Will Pedley · 10-10-2009, 03:13 PM

Rightio - time for a clearout and i'm selling all my unused 'spares'...

All this stuff is brand new - most of it is still in its packaging.

The 'Red & Blue' fittings came from Think Auto and the 'Black' Fittings are AEROMOTIVE from Webster Race Engineering, so no chinese copy rubbish here

OK - In colour order.

AEROMOTIVE BLACK ANODISED FINISH (Both Halves where applicable)

3x -10AN Male To Male 'Cutoff Tapered Flare'
http://www.jdmperformance.co.uk/item...p?prodID=44179
£47.40 on there - i'm selling for £30 each!

1x -10AN Hose End Straight
http://www.jdmperformance.co.uk/item...p?prodID=44208
£53.14 on there - i'm selling for £35!

2x -6AN Male To Male 'Flare Union'
http://www.jdmperformance.co.uk/item...p?prodID=44173
£41.03 on there - i'm selling for £25 each!

2x -6AN Hose End Straight
http://www.jdmperformance.co.uk/item...p?prodID=44202
£45.68 on there - i'm selling for £30 each!

I also have:

1x -6AN 180 Degree Hose End
Bought through Webster Race Engineering for around £50 - unfortunately i can't find an online link. £35

RED & BLUE ANODISED FINISH (Both halves where applicable)

2x -10AN Hose End Straight
Paid £12.59+VAT - Selling for £10 each!

1x -6AN Hose End Straight
Paid £8.00+VAT - Selling for £5!

2x -6AN 45 Deg Hose End
Paid £19.07+VAT - Selling for £15 each!

2x -6AN 90 Deg Hose End
Paid £19.24+VAT - Selling for £15 each!

1x -6AN Adaptor Female to Female
(Can't find receipt - Sure it was around £10) - Selling for £5!

1x - 6AN to -10AN Male to Male Adaptor (All Blue)
Paid £7.82+VAT - Selling for £5!

2 x -6AN to -8AN Male to Male Adaptor (All Blue)
Paid £5.50+VAT - Selling for £3.50 each!

2x 1/2BSP to -10AN Male to Male Adaptor (All Blue)
Paid £5.77+VAT - Selling for £3.50 each!

I think the prices are suitably discounted to say i've done nothing with these other than take them out the delivery box and have them sat in my toolbox for the last 6-18 months!

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

Will Pedley · 10-10-2009, 03:17 PM

If anyone wants the lot - i'll do it for £325 delivered

Will Pedley · 12-10-2009, 02:53 PM

Anyone?

Don't make me have to do individual ebay adverts

-beefy- · 13-10-2009, 12:29 AM

how much of this lot would be useable on the s1 cos of mine fella ??

Will Pedley · 13-10-2009, 09:28 AM

The -6AN stuff is good for fuel systems.

The -10AN stuff is good for oil coolers/breathers etc.

I'm sure you could 'find' a use for it

Roosie · 13-10-2009, 07:59 PM

what adapter would i need to weld/screw into rocker cover for breather at back! i want a areoquip hose to go from rocker to breather with all the fittings

Will Pedley · 13-10-2009, 11:57 PM

Depends what fittings if any you have on the breather setup at the moment...

If you're starting from scratch - i'd suggest going for -10AN.

The adaptors i've got could be welded on, but personally i wouldn't, there are more suitable ones you can buy to do it.

Worlds worst salesman

Will Pedley · 15-10-2009, 03:05 PM

1 x -6AN Male To Male 'Flare Union' in Black
1 x -6AN 90 Deg Hose End Red/Blue
1 x -6AN 90 Deg Hose End Red/Blue

Are sold now

Will Pedley · 10-11-2009, 09:38 PM

UP UP UP! Still for sale

-beefy- · 10-11-2009, 09:42 PM

i want i want i want , but im skint lol ,

arrgggggggggggghhhhhhhhhhhhhhhhhh

lol

beef

Will Pedley · 23-12-2009, 02:39 PM

BTTT

tezmanian devil · 23-12-2009, 10:29 PM

do you have any -10 fitting's?

Will Pedley · 23-12-2009, 11:36 PM

Yes, couple of -10 straights and adaptors.

Please see the full list on the original post!

tezmanian devil · 25-12-2009, 01:09 AM

dam, i need 2x 60 degree -10's 1x 90degree -10 and 1x 45 degree -10

Rs Gus · 18-01-2010, 09:44 PM

oiy willam reply to my text or my call

10-10-2009, 03:17 PM	#2
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	If anyone wants the lot - i'll do it for £325 delivered __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

12-10-2009, 02:53 PM	#3
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	Anyone? Don't make me have to do individual ebay adverts __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

13-10-2009, 12:29 AM	#4
-beefy- formerly beefy-rst-2 Garage is empty, add now Trader Score: (6) Join Date: Sep 2005 Location: cleveland rsoc Posts: 9,634 Rep Power: 16	how much of this lot would be useable on the s1 cos of mine fella ?? __________________ founder of the parmo apprcieation scoceity ... SUPPORTER OF RONNIE AMIS !!-team airtec/gs automotive !!! Quote: Originally Posted by Will @ M Developments Honestly, a roller T4 like wennys would suit your needs perfectly. If it did blowjobs and made parmos you'd need nothing else in life

13-10-2009, 09:28 AM	#5
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	The -6AN stuff is good for fuel systems. The -10AN stuff is good for oil coolers/breathers etc. I'm sure you could 'find' a use for it __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

13-10-2009, 11:57 PM	#7
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	Depends what fittings if any you have on the breather setup at the moment... If you're starting from scratch - i'd suggest going for -10AN. The adaptors i've got could be welded on, but personally i wouldn't, there are more suitable ones you can buy to do it. Worlds worst salesman __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

13-10-2009, 07:59 PM	#6
Roosie 500bhp Cosworth in making 1994 Ford Escort My Garage Trader Score: (7) Join Date: May 2003 Location: Brandon Posts: 8,885 Rep Power: 17	what adapter would i need to weld/screw into rocker cover for breather at back! i want a areoquip hose to go from rocker to breather with all the fittings

15-10-2009, 03:05 PM	#8
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	1 x -6AN Male To Male 'Flare Union' in Black 1 x -6AN 90 Deg Hose End Red/Blue 1 x -6AN 90 Deg Hose End Red/Blue Are sold now __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

10-11-2009, 09:38 PM	#9
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	UP UP UP! Still for sale __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

10-11-2009, 09:42 PM	#10
-beefy- formerly beefy-rst-2 Garage is empty, add now Trader Score: (6) Join Date: Sep 2005 Location: cleveland rsoc Posts: 9,634 Rep Power: 16	i want i want i want , but im skint lol , arrgggggggggggghhhhhhhhhhhhhhhhhh lol beef __________________ founder of the parmo apprcieation scoceity ... SUPPORTER OF RONNIE AMIS !!-team airtec/gs automotive !!! Quote: Originally Posted by Will @ M Developments Honestly, a roller T4 like wennys would suit your needs perfectly. If it did blowjobs and made parmos you'd need nothing else in life

23-12-2009, 02:39 PM	#11
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	BTTT __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

23-12-2009, 10:29 PM	#12
tezmanian devil I've found that life I needed.. It's HERE!! Garage is empty, add now Trader Score: (8) Join Date: Dec 2006 Location: eastbourne Posts: 1,279 Rep Power: 7	do you have any -10 fitting's? __________________ my 300+bhp mk5 escort zetec turbo project http://passionford.com/forum/restora...engine-in.html

23-12-2009, 11:36 PM	#13
Will Pedley Borg Warner EFR Equipped! Garage is empty, add now Trader Score: (0) Join Date: Apr 2005 Location: In the unit, building a 450bhp Time Attack Focus! Posts: 5,631 Rep Power: 12	Yes, couple of -10 straights and adaptors. Please see the full list on the original post! __________________ Sierra Cosworth RS500 Time Attack Focus ST170 E46 330d Touring Take a look at my Time Attack build!

25-12-2009, 01:09 AM	#14
tezmanian devil I've found that life I needed.. It's HERE!! Garage is empty, add now Trader Score: (8) Join Date: Dec 2006 Location: eastbourne Posts: 1,279 Rep Power: 7	dam, i need 2x 60 degree -10's 1x 90degree -10 and 1x 45 degree -10 __________________ my 300+bhp mk5 escort zetec turbo project http://passionford.com/forum/restora...engine-in.html

18-01-2010, 09:44 PM	#15
Rs Gus impreza wrx sti version 8 Garage is empty, add now Trader Score: (2) Join Date: Jul 2003 Location: sheffield Posts: 8,764 Rep Power: 17	oiy willam reply to my text or my call __________________ Motorsport Developments: "The engine management Live mapping Specialists" 01253 508400

18-01-2010, 09:44 PM
PassionFord Ford Focus Paid Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aeroquip fittings	fordrallycar	Ford RS Cosworth parts for sale	4	12-06-2008 09:32 AM
Aeroquip fittings	fordrallycar	Ford RS Cosworth parts for sale	0	26-05-2008 11:56 AM
aeroquip fittings	Sanchez_	General Car Related Discussion.	5	30-09-2007 09:11 AM
Aeroquip fittings?	Billy_RS	General Car Related Discussion.	19	18-03-2007 04:55 PM
AEROQUIP FITTINGS,,,-8 -6 ETC???	M K	General Car Related Discussion.	21	03-10-2005 12:16 AM