Wilwood 4 Pots & EBC Pads
30-08-2006, 05:48 PM
#1
Part of the Furniture
Thread Starter
Join Date: Jul 2004
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Wilwood 4 Pots & EBC Pads
Wilwood's Part Number: 120-5179 alongside EBC Greenstuff pads to suit.
Bought these from another forum a while back, the plan was to fit them to a CRX but then i wised up - sold the Honda and bought a Saph
Picture is from a mobile so a bit pants.
Obviously as i'm in N. Ireland i'm willing to post them etc
Price = £160 all in including postage, which is less than what i paid for them but i can appreciate whoever buys them is going to have to make up their own fitting kit so price reflects this
Cheers,
Terry
P.S. My understanding is these have been fitted to a 205 gti before but never actually used, there are some very slight marks on the edge of the caliper but they look in tip top order.
Bought these from another forum a while back, the plan was to fit them to a CRX but then i wised up - sold the Honda and bought a Saph
Picture is from a mobile so a bit pants.
Obviously as i'm in N. Ireland i'm willing to post them etc
Price = £160 all in including postage, which is less than what i paid for them but i can appreciate whoever buys them is going to have to make up their own fitting kit so price reflects this
Cheers,
Terry
P.S. My understanding is these have been fitted to a 205 gti before but never actually used, there are some very slight marks on the edge of the caliper but they look in tip top order.
30-08-2006, 10:05 PM
#3
Part of the Furniture
Thread Starter
Join Date: Jul 2004
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I've replied too boss.
And for anyone else who may ask, the following is all the information on measurements etc i was given when i first bought these.
bore size 1.62" 41,1 mm
disk width 1.25" 31,8
part number 120-5179
Billet NDL Caliper Highlights:
Wilwood's Billet Narrow Mount Dynalite (NDL) caliper combines the lightweight, high torque performance of our Dynalite Series Calipers, but utilizes a thicker pad design and bolts directly onto standard Superlite 3.5" mounts. This caliper weighs only 3.0 pounds, yet provides tremendous brake torque. The caliper is extremely compact and will easily mount in limited clearance applications.
ts computer generated billet design incorporates internal fluid crossover passages to eliminate external tubes, while the extra thick (.63") Dynalite pad is securely held in by the bridge bolt design. Standard Wilwood features include deep cup stainless steel pistons, high temperature piston seals and black anodized finish. The caliper is available in 1.75, 1.62, 1.38 and 1.12 inch piston bores for 1.25, .81, .50, and .38 inch rotor widths. The Billet NDL is ideal for many racing applications, including Late Models, Modifieds, Sprints, Off Road and Road Racers.
And for anyone else who may ask, the following is all the information on measurements etc i was given when i first bought these.
bore size 1.62" 41,1 mm
disk width 1.25" 31,8
part number 120-5179
Billet NDL Caliper Highlights:
Wilwood's Billet Narrow Mount Dynalite (NDL) caliper combines the lightweight, high torque performance of our Dynalite Series Calipers, but utilizes a thicker pad design and bolts directly onto standard Superlite 3.5" mounts. This caliper weighs only 3.0 pounds, yet provides tremendous brake torque. The caliper is extremely compact and will easily mount in limited clearance applications.
ts computer generated billet design incorporates internal fluid crossover passages to eliminate external tubes, while the extra thick (.63") Dynalite pad is securely held in by the bridge bolt design. Standard Wilwood features include deep cup stainless steel pistons, high temperature piston seals and black anodized finish. The caliper is available in 1.75, 1.62, 1.38 and 1.12 inch piston bores for 1.25, .81, .50, and .38 inch rotor widths. The Billet NDL is ideal for many racing applications, including Late Models, Modifieds, Sprints, Off Road and Road Racers.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
