t5 cosworth gearbox quafie version from gearbox man

[abdr500]

ok so nothing more any one want to add to this topic

If you were logged in, you wouldn't be seeing this ad! Register your free account today, or log in if you already have an account.

[Dan@Rapid-Ford]

fuck the gearbox just put pedals in it you won't need to cut much out of the floor

[abdr500]

Dan@Rapid-Ford
cut out of the floor what do you mean

[Dan@Rapid-Ford]

Originally Posted by abdr500

Dan@Rapid-Ford
cut out of the floor what do you mean

bring it over and I'll start you off

[abdr500]

haha i get it this incedent i can look back and injoy the pay out

[Dan@Rapid-Ford]

is that you behind bars and they put your car infront of you to wind you up

I think he might be up to something

[abdr500]

thats when i was collecting it lol

[Dan@Rapid-Ford]

Was that after they valeted for you??

and did you do big doughnuts in the car park before you left?? private property and all that

[marco polo]

Hi Lads


just to let you know there will, NOTbe a T5 sequentail box


there might be a MT75 RWD SEQUENTAIL BOX INSTEAD same goes for the 4wd MT75

working on one at the min


Bara was going to do a Mullit big tooth striaght cut T5 but has changed his mind because not enough interest


if there were 5 people that wanted a big tooth striaght cut box then he might start making some


I think the best way to go for a modded RWD box is the TKO route and if someone like Martin is offering a conversion to fit it in your car then go for it


cheers marco

[abdr500]

Mullit big tooth striaght cut T5 is that not the same as the gearbox man one what would the cost be for 1 if we did find 4 others just looking at my option wating for a response from martin about the tko box and it seems to be the best option but realy just want a direct fit

[rapidcossie]

gear box man one is a quaife gear kit and is not straight cut.

[marco polo]

Originally Posted by abdr500

Mullit big tooth striaght cut T5 is that not the same as the gearbox man one

No Mate


defo not ..........his own gears made to suit but still will be syncro box


price would be about 2.2k i would say but that would be a striaght bolt in jobbie no mods


marco

[abdr500]

straight cut.is that the nosie fuccker one if yes can i have one that is only straight cut on certain gears only

[marco polo]

abdr500


well yes it will be nosier that a normal box and no all the gears will be straight cut


marco

[Alg1k]

I have a gearbox man box in the dolly
I have had no issues with it changing gear even at 8700rpm
I have the standard forks and also
I have a hydraulic clutch set up which is thoroughly reccomended
My car recently made well over 640 hp atw
I have stepped of the clutch at 8300rpm on drag radials at the pod with no gbox woes but the tripple plate clutch didnt like it( the term explosion comes to mind)
The only issue i had with the box is when i missed 2nd gear and stripped it but since getting rid of the cable operated clutch its been perfect,
And i would also strongly reccomend an oil cooler .

[abdr500]

Originally Posted by marco polo

abdr500


well yes it will be nosier that a normal box and no all the gears will be straight cut


marco

how much nosier i dont mind a bit but can it be lived with so i need to find 4 other people DOES ANY ONE WANT TO ADD THEM SELF TO THE LIST

[rapidcossie]

Originally Posted by Alg1k

I have a gearbox man box in the dolly
I have had no issues with it changing gear even at 8700rpm
I have the standard forks and also
I have a hydraulic clutch set up which is thoroughly reccomended
My car recently made well over 640 hp atw
I have stepped of the clutch at 8300rpm on drag radials at the pod with no gbox woes but the tripple plate clutch didnt like it( the term explosion comes to mind)
The only issue i had with the box is when i missed 2nd gear and stripped it but since getting rid of the cable operated clutch its been perfect,
And i would also strongly reccomend an oil cooler .

your car kinda proves the box must be ok then Daz...

Sounds like a fookin monster

Who converted the T5 to run a oil cooler?

Any pics?

[2001ode]

Hi,
Sorry to hijack, but nobody spoke about T5 GLEBE kit.
Who have some info ?

Regards

Claude

[rapidcossie]

the glebe kit has very very long ratios does it not? 70 mph in 1st gear etc...

[2001ode]

GLEBE short ratio is very similar than QUAIFFE short ration.


GLEBE short ratio : 2.43 / 1.56 / 1.24 / 1.0 / 0.90
Quaiffe short ratio : 2.53 / 1.68 / 1.26 / 1.0 / 0.87

Regards.

Claude

[abdr500]

any one no were i can buy a tko box one sutied for a cosworth

[Dan@Rapid-Ford]

Originally Posted by Alg1k

I have a gearbox man box in the dolly
I have had no issues with it changing gear even at 8700rpm
I have the standard forks and also
I have a hydraulic clutch set up which is thoroughly reccomended
My car recently made well over 640 hp atw
I have stepped of the clutch at 8300rpm on drag radials at the pod with no gbox woes but the tripple plate clutch didnt like it( the term explosion comes to mind)
The only issue i had with the box is when i missed 2nd gear and stripped it but since getting rid of the cable operated clutch its been perfect,
And i would also strongly reccomend an oil cooler .

Hi

do you have the std ratio box or the close one? I've got the std ratio box, not had any problems with it but only running 370ish.

I think Dingy has got the close ratio box in his car.

[abdr500]

Dan@Rapid-Ford
ok so whats your box like lol

[Dan@Rapid-Ford]

I had an issue with the gearchange when I first got it but changed the fluid to syth oil and it was fine.

I've not had any serious issues with it yet, I'm hoping it the close ratio boxs have the problems and the std don't.

If you pay for the mullit box for me I'll try it and let you know and I'll even lend you my CTS one whilst its out

[abdr500]

ok so that me and dan that wants a mullet gearbox 3 more people left to find surley thers is other people that brake t5 gearbox or is it just a few of us that have real power

[Dan@Rapid-Ford]

Originally Posted by abdr500

ok so that me and dan that wants a mullet gearbox 3 more people left to find surley thers is other people that brake t5 gearbox or is it just a few of us that have real power

so your gonna buy me a mullet box I think you should re read what I've typed above.

[abdr500]

you are the mullet box

[Dan@Rapid-Ford]

so you've changed your mind

[abdr500]

lol just by one for the sake of it you have lots of money anyways do you have a t34 turbo you want to sell

[JonnyBravo]

Originally Posted by abdr500

any one no were i can buy a tko box one sutied for a cosworth

Not meaning to sound harsh mate but do you actually want a gearbox as Martin @ Reyland has already clearly stated he can supply a gearbox and everything you need to make it fit.

As thats what you want why don't you just sort it out now rather than keeping asking for options as quite simply there is no cheaper way of doing it.

Drenth, Glebe, Quaife or Mullet sequential boxes are all going to be a LOT of money and as I said before they are a complete waste in a road car.

Its YOUR choice but as I first said the Tremec is the best option and it IS available.

[abdr500]

JonnyBravo
i am not trying to get a cheaper opition as tko box is cheaper than the direct fit ones i have kindly ask martin in a pm to get back to me on a price when he does i will decide i have also sent a pm to marco i havent had any reply yet i am n ot looking for a cheaper option the tko is a cheaper option but posible the best option it just thers not mutch info on them

not much chance of getting a list together for the mullet box when you cant make your mind up what you want

[JonnyBravo]

Thats fair enough mate, I think MadRods box has been faultless with upto 1000hp being used at times

I know the ratios for the boxes have been posted before so someone on here has them, its a shame the search engine is so crap

[abdr500]

Matt J
well when i get a list of option for the 2wd cosworth i can then make my mind up i like to see my options first

[JonnyBravo]

Found this for you which might help you out

http://www.5speedtransmissions.com/5sp_comparison.html

All the info seems to be on there if you scroll down

[Dan@Rapid-Ford]

what about the selholm boxes

you'll like the price of them

[Alg1k]

Originally Posted by Dan@Rapid-Ford

Hi

do you have the std ratio box or the close one? I've got the std ratio box, not had any problems with it but only running 370ish.

I think Dingy has got the close ratio box in his car.

Hi I have the close box in my car
Bernie converted the box for oil cooler very simple job to do it

[Dingy]

Mines in and tested...its a bit tight on the down change but going up the box is now perfect....

Only at 1 bar of boost this was tested though, going to do some more tests today.

Thinking its a bit tight because of the rebuild