Show season soon, what jobs have you got to do?
#1
ELASTIC BAND
Thread Starter
Show season soon, what jobs have you got to do?
To get the car ready then?
Me, just fitted some new front bumber mounts, sprayed the spliter and fog surrounds.
along with a full service, almost.
Just got to
fit the bumper,
reattach an oil breater pipe I snapped off!
recheck my fuel filter dont leak, after fitting some dowty washers.
change the insurance from layaway to road use
Taxing for the 1st April, as will use for work next week, due to being school holidays less traffic
then pop to a mates to have the cambelt renewed.
Me, just fitted some new front bumber mounts, sprayed the spliter and fog surrounds.
along with a full service, almost.
Just got to
fit the bumper,
reattach an oil breater pipe I snapped off!
recheck my fuel filter dont leak, after fitting some dowty washers.
change the insurance from layaway to road use
Taxing for the 1st April, as will use for work next week, due to being school holidays less traffic
then pop to a mates to have the cambelt renewed.
#2
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
Received 1,042 Likes
on
996 Posts
Ive just had my timing belt and tensioner removed the other week. I thought since the t belt cover was off i would change the dizzy cap and arm.
I just havent got round to refitting it yet. I haven't booked any cars shows yet cause im waiting to get into our new house.
I just havent got round to refitting it yet. I haven't booked any cars shows yet cause im waiting to get into our new house.
The following users liked this post:
CrOwSoN15 (26-03-2015)
#4
I've found that life I needed.. It's HERE!!
Mines been picked up and off to SCS tomorrow to go stage 3 and a cambelt and oil change once it's back just clean and drive if I get anything else dome its a bonus lol
#5
Ben
Actually buy a project
#6
PassionFord Post Whore!!
Some more miles and then oil change, as I killed it on way to ford fair last year.
Refurb on current wheels or change to S2 wheels.
Get modded bumper finished and a bit of paint work.
Fit additional gauges.
Refurb on current wheels or change to S2 wheels.
Get modded bumper finished and a bit of paint work.
Fit additional gauges.
#7
wesskitzo
iTrader: (1)
To get the car ready then?
Me, just fitted some new front bumber mounts, sprayed the spliter and fog surrounds.
along with a full service, almost.
Just got to
fit the bumper,
reattach an oil breater pipe I snapped off!
recheck my fuel filter dont leak, after fitting some dowty washers.
change the insurance from layaway to road use
Taxing for the 1st April, as will use for work next week, due to being school holidays less traffic
then pop to a mates to have the cambelt renewed.
Me, just fitted some new front bumber mounts, sprayed the spliter and fog surrounds.
along with a full service, almost.
Just got to
fit the bumper,
reattach an oil breater pipe I snapped off!
recheck my fuel filter dont leak, after fitting some dowty washers.
change the insurance from layaway to road use
Taxing for the 1st April, as will use for work next week, due to being school holidays less traffic
then pop to a mates to have the cambelt renewed.
Trending Topics
#9
PassionFord Regular
1. Wait for new AP 4pots from reyland 330 j hooks front 300 j hooks rear,
Wait for big red to send my rear calipers back, Fit the lot.
2. Fit my new splitter.
3. Tax
4. Fill with shell optimax & enjoy.....
Wait for big red to send my rear calipers back, Fit the lot.
2. Fit my new splitter.
3. Tax
4. Fill with shell optimax & enjoy.....
#12
ELASTIC BAND
Thread Starter
#14
Regular Contributor
Visit NMS for stage 3
Fit ali clutch ratchet
Paint rocker cover back to red and cams gold
Work out where my oil leaks coming from
Work out why the gearbox is leaking from the output shaft
Remove carpets and paint floor
Wet wash carpets and seats
New tyres all round
New windscreen
Fit d/v
Fit OEM fan switch as lower one keeps kicking in permanently making my engine bay dirty
Fit ali clutch ratchet
Paint rocker cover back to red and cams gold
Work out where my oil leaks coming from
Work out why the gearbox is leaking from the output shaft
Remove carpets and paint floor
Wet wash carpets and seats
New tyres all round
New windscreen
Fit d/v
Fit OEM fan switch as lower one keeps kicking in permanently making my engine bay dirty
#16
Carbon Crazy
iTrader: (5)
cut out holes in floor
weld in rust repairs
finish cutting wiring loom
fit wiring loom
fit battery cabling
fit battery cut off
fit extinguisher and pulls
fit intercom
make seat mounts
fit seats
make floor for pedal box
refit dash
make braided brake hoses front to rear
fit anti-roll bars
fit front brakes
fix handbrake cable
fit hydraulic handbrake
fit carbon/kevlar guards
fit carbon mudflaps
fit roof vent
fit vinyl wrap on roof
fit engine
weld in rust repairs
finish cutting wiring loom
fit wiring loom
fit battery cabling
fit battery cut off
fit extinguisher and pulls
fit intercom
make seat mounts
fit seats
make floor for pedal box
refit dash
make braided brake hoses front to rear
fit anti-roll bars
fit front brakes
fix handbrake cable
fit hydraulic handbrake
fit carbon/kevlar guards
fit carbon mudflaps
fit roof vent
fit vinyl wrap on roof
fit engine
#20
I'm Finding My Feet Here Now
full resto..... its away at painters for its first real big welding/painting session in 35yrs , then its redo wiring loom,full interior, pinto refresh,rebuild 48 carbs, everything..... lol,,,,, maybe make crail april....pigs flying....
#25
PassionFord Post Whore!!
Join Date: Dec 2009
Location: South of England
Posts: 6,728
Likes: 0
Received 560 Likes
on
522 Posts
To get the car ready then? Me, just fitted some new front bumber mounts, sprayed the spliter and fog surrounds. along with a full service, almost. Just got to fit the bumper, reattach an oil breater pipe I snapped off! recheck my fuel filter dont leak, after fitting some dowty washers. change the insurance from layaway to road use Taxing for the 1st April, as will use for work next week, due to being school holidays less traffic then pop to a mates to have the cambelt renewed.
#26
PassionFord Post Whore!!
I got a bit carried away with mine.
It currently looks like this, only I've stripped it some more and started cutting metal out lol.
And the subframe...
And I haven't even touched the rear end yet lol.
I won't list what I have to do because I would be here all day.
Here's a small selection of the parts I've been buying.
I only get 2 nights a week to work on it so progress is slow!
It will be finished by May and on the road for the first time in 4 years!!!
It currently looks like this, only I've stripped it some more and started cutting metal out lol.
And the subframe...
And I haven't even touched the rear end yet lol.
I won't list what I have to do because I would be here all day.
Here's a small selection of the parts I've been buying.
I only get 2 nights a week to work on it so progress is slow!
It will be finished by May and on the road for the first time in 4 years!!!
#27
TT T38 Power
iTrader: (15)
The 4i needs a visit to the legend Moan of Turbosystems for a mapping session.
The 3dr needs the original wheels refitting.
No shows booked yet as I am moving from Kent to Somerset in April. Will have plenty to do in the house but I have a very nice 4 car garage with a workshop space at the back to play in.
Steve
The 3dr needs the original wheels refitting.
No shows booked yet as I am moving from Kent to Somerset in April. Will have plenty to do in the house but I have a very nice 4 car garage with a workshop space at the back to play in.
Steve
#28
wesskitzo
iTrader: (1)
The 4i needs a visit to the legend Moan of Turbosystems for a mapping session.
The 3dr needs the original wheels refitting.
No shows booked yet as I am moving from Kent to Somerset in April. Will have plenty to do in the house but I have a very nice 4 car garage with a workshop space at the back to play in.
Steve
The 3dr needs the original wheels refitting.
No shows booked yet as I am moving from Kent to Somerset in April. Will have plenty to do in the house but I have a very nice 4 car garage with a workshop space at the back to play in.
Steve
#30
PassionFord Post Whore!!
iTrader: (2)
All fluids changed
Refit rear beam
Buy tyres for my new wheels and get them on.
Cam belt change
Mot
God knows what else but safe to say progress will be slow. I bought the wheels months ago and they haven't been anywhere near the car yet. If they don't clear my brakes I'll be fucking gutted
Refit rear beam
Buy tyres for my new wheels and get them on.
Cam belt change
Mot
God knows what else but safe to say progress will be slow. I bought the wheels months ago and they haven't been anywhere near the car yet. If they don't clear my brakes I'll be fucking gutted
#32
PassionFord Post Whore!!
Mot and tax... Easy enough
Once retrimmed interior is done, swap it all over...
Fit new manifold and book it in for mapping...
Once retrimmed interior is done, swap it all over...
Fit new manifold and book it in for mapping...
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
rsguy
General Car Related Discussion.
44
29-09-2015 03:29 PM