big thanks to RSMATT

cutch · 04-05-2012, 08:49 AM

looking for either 17mm or 18mm ID hose for my Bailey breather, i have 16mm but its way too tight down by the inlet to get it on, tried bioling the end and stretching but it aint going on, several skinned knuckles and alot of shouting have got me to here!

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

Rsmat · 04-05-2012, 08:55 AM

How long a piece you need mate...?

cutch · 04-05-2012, 09:01 AM

43cm Matt.

Rsmat · 04-05-2012, 09:59 AM

Right I'll go have a look mate.

slammedorion · 04-05-2012, 11:09 AM

http://www.autosiliconehoses.com/

Rsmat · 04-05-2012, 11:37 AM

That's where mine came from...^^^ I'm sending him a piece.

cutch · 04-05-2012, 11:57 AM

Your a true gent Matt!

^^^ Wouldnt even let me pay for postage!

Rsmat · 04-05-2012, 12:21 PM

No probs mate... I would have never used these off cuts anyway... So glad you can make use of them.

KSA-Cossie · 04-05-2012, 12:32 PM

Nice one Matt

GUZZLER · 04-05-2012, 04:30 PM

Good stuff Matt

stu21t · 04-05-2012, 04:41 PM

For futre reference this might help.
If i have a hose thats a bit tight i normally put some boiling water in a pot and let the hose sit in it for abit. 9 times out of 10 it will then stretch over.
Too late now i know, and if you tried that then ignore me lol.

Rsmat · 04-05-2012, 04:47 PM

Read his first post lol....

Glenn_ · 04-05-2012, 07:19 PM

We love you Matt.

stu21t · 04-05-2012, 08:21 PM

Pmsl
I swear that bit must have been edited in lol.

Rsmat · 04-05-2012, 09:06 PM

Quote:

Originally Posted by Glenn_

We love you Matt.

Thanks mate... We are genuine people..hope your ok mate.

.Ross. · 04-05-2012, 09:11 PM

Your a good man Matt

Sticky. · 04-05-2012, 11:28 PM

Nice one Matt.

Cossie Sean · 04-05-2012, 11:37 PM

Stu, read posts..........
Matt probebly punched fuck out of it, softened it up and spread to the desired diamiter, hence free as even the postman didnt want fuck all to do with it either

Top man for the freebie!

carlo · 05-05-2012, 07:30 AM

I'm sure I have black samco stuff in the garage as well mate

vaughant · 05-05-2012, 07:40 AM

Cutch is one of the soundest people on here,saved me from a lot of crap with my transit van last winter and again wouldn't take anything for helping,but the lure of irn bru was too much for him!!!
Eventually managed to convince his mrs to take half the scrap money I got for the van so she's sound as a pound as well.
Great to see all the help people give on here.
Btw cutch I STILL have your boys goalposts in my house,I'll drop them off next time I'm driving up,had to fly this time.

Well done matt,karma is strong!!!

Less. · 05-05-2012, 07:44 AM

Nice one Mat you seem to go out of your way to help people on her good one

**Jay,** · 05-05-2012, 07:44 AM

He 's a good lad our Matt

Rsmat · 05-05-2012, 08:42 AM

Cheers guys.

JayCC · 05-05-2012, 11:39 AM

Should have jumped in the car and driven them, lazy fucker!

Nice one

cutch · 05-05-2012, 04:41 PM

Matt, cant thank you enough mate, it arrived today 1st class! you didnt need to do that. Well you were right the 16mm slipped on straight away no problems, now making the bracket for the breather and should be finished tonight. Cheers bud, i owe you a pint!

Glenn_ · 05-05-2012, 04:57 PM

Quote:

Originally Posted by RS_matt

Thanks mate... We are genuine people..hope your ok mate.

I would do anything to help my fellow ford mad people out.

Yeh im ok fella.Thanks for asking.

GUZZLER · 05-05-2012, 05:57 PM

Great post chaps, I've dealt with Matt & Cutch, both good lads, reminds me of why I still browse this forum everyday

04-05-2012, 09:01 AM	#3
cutch Series 1 4x4 cossie 1985 Ford Escort Trader Score: (1) Join Date: Mar 2008 Location: Bonnie Scotland !! Or offshore in Africa!!!! Posts: 2,484 Rep Power: 8	43cm Matt. __________________ My Series 1 4x4 cosworth build I get all my bits from www.mattlewismotorsport.co.uk/

04-05-2012, 11:09 AM	#5
slammedorion Advanced PassionFord User Garage is empty, add now Trader Score: (0) Join Date: Nov 2004 Location: Crewe Posts: 2,338 Rep Power: 11	http://www.autosiliconehoses.com/ __________________

04-05-2012, 11:57 AM	#7
cutch Series 1 4x4 cossie 1985 Ford Escort Trader Score: (1) Join Date: Mar 2008 Location: Bonnie Scotland !! Or offshore in Africa!!!! Posts: 2,484 Rep Power: 8	Your a true gent Matt! ^^^ Wouldnt even let me pay for postage! __________________ My Series 1 4x4 cosworth build I get all my bits from www.mattlewismotorsport.co.uk/

04-05-2012, 04:30 PM	#10
GUZZLER PassionFord Post Whore!! Garage is empty, add now Trader Score: (3) Join Date: Apr 2004 Location: Northants Posts: 8,190 Rep Power: 18	Good stuff Matt __________________

04-05-2012, 04:41 PM	#11
stu21t PassionFord Post Troll Garage is empty, add now Trader Score: (0) Join Date: Oct 2004 Location: south london Posts: 3,378 Rep Power: 12	For futre reference this might help. If i have a hose thats a bit tight i normally put some boiling water in a pot and let the hose sit in it for abit. 9 times out of 10 it will then stretch over. Too late now i know, and if you tried that then ignore me lol. __________________ link to my cossie powered renault 5 http://passionford.com/forum/restora...nault-5-a.html http://harringtonbuilders.co.uk

04-05-2012, 08:55 AM	#2
Rsmat BANNED BANNED Garage is empty, add now Trader Score: (2) Join Date: May 2004 Location: either at work or on way :) Posts: 22,815 Rep Power: 0	How long a piece you need mate...?

04-05-2012, 09:59 AM	#4
Rsmat BANNED BANNED Garage is empty, add now Trader Score: (2) Join Date: May 2004 Location: either at work or on way :) Posts: 22,815 Rep Power: 0	Right I'll go have a look mate.

04-05-2012, 11:37 AM	#6
Rsmat BANNED BANNED Garage is empty, add now Trader Score: (2) Join Date: May 2004 Location: either at work or on way :) Posts: 22,815 Rep Power: 0	That's where mine came from...^^^ I'm sending him a piece.

04-05-2012, 12:21 PM	#8
Rsmat BANNED BANNED Garage is empty, add now Trader Score: (2) Join Date: May 2004 Location: either at work or on way :) Posts: 22,815 Rep Power: 0	No probs mate... I would have never used these off cuts anyway... So glad you can make use of them.

04-05-2012, 12:32 PM	#9
KSA-Cossie 20K+ Super Poster. Garage is empty, add now Trader Score: (3) Join Date: May 2004 Location: Shutting down jap crap Posts: 24,812 Rep Power: 34	Nice one Matt

04-05-2012, 04:47 PM	#12
Rsmat BANNED BANNED Garage is empty, add now Trader Score: (2) Join Date: May 2004 Location: either at work or on way :) Posts: 22,815 Rep Power: 0	Read his first post lol....

04-05-2012, 07:19 PM	#13
Glenn_ Chasing Radders Garage is empty, add now Trader Score: (1) Join Date: Jul 2006 Location: Darlington county durham Posts: 38,719 Rep Power: 45	We love you Matt. __________________

04-05-2012, 08:21 PM	#14
stu21t PassionFord Post Troll Garage is empty, add now Trader Score: (0) Join Date: Oct 2004 Location: south london Posts: 3,378 Rep Power: 12	Pmsl I swear that bit must have been edited in lol. __________________ link to my cossie powered renault 5 http://passionford.com/forum/restora...nault-5-a.html http://harringtonbuilders.co.uk

04-05-2012, 09:11 PM	#16
.Ross. Advanced PassionFord User 2008 Ford F-150 Trader Score: (2) Join Date: Apr 2009 Location: BC, Canada Posts: 2,203 Rep Power: 7	Your a good man Matt __________________ Blown V8 Shopping Trolly

04-05-2012, 11:28 PM	#17
Sticky. 20K+ Super Poster. Garage is empty, add now Trader Score: (4) Join Date: Apr 2004 Location: Liverpool Posts: 23,137 Rep Power: 33	Nice one Matt. __________________ www.mattlewismotorsportonline.co.uk www.richardburnsfoundation.com www.mt-motorsport.com

04-05-2012, 11:37 PM	#18
Cossie Sean big floppy donkey dick Garage is empty, add now Trader Score: (0) Join Date: May 2003 Location: Building My High Reving 2.2 5cyl 20v Turbo powered RWD A4 Posts: 3,785 Rep Power: 14	Stu, read posts.......... Matt probebly punched fuck out of it, softened it up and spread to the desired diamiter, hence free as even the postman didnt want fuck all to do with it either Top man for the freebie! __________________ Couple of Quick Audis and RouseSport Saff

05-05-2012, 07:30 AM	#19
carlo 15K+ Super Poster!! Garage is empty, add now Trader Score: (4) Join Date: Mar 2005 Location: Ayrshire (the bronx) Posts: 17,047 Rep Power: 26	I'm sure I have black samco stuff in the garage as well mate __________________

05-05-2012, 07:40 AM	#20
vaughant PassionFord Post Whore!! Garage is empty, add now Trader Score: (1) Join Date: Jun 2008 Location: south wales, swansea Posts: 6,436 Rep Power: 12	Cutch is one of the soundest people on here,saved me from a lot of crap with my transit van last winter and again wouldn't take anything for helping,but the lure of irn bru was too much for him!!! Eventually managed to convince his mrs to take half the scrap money I got for the van so she's sound as a pound as well. Great to see all the help people give on here. Btw cutch I STILL have your boys goalposts in my house,I'll drop them off next time I'm driving up,had to fly this time. Well done matt,karma is strong!!!

05-05-2012, 07:44 AM	#21
Less. having a mid life crisis Garage is empty, add now Trader Score: (0) Join Date: Jun 2003 Location: Kent Posts: 45,245 Rep Power: 57	Nice one Mat you seem to go out of your way to help people on her good one

05-05-2012, 07:44 AM	#22
Jay, Super Moderator 2007 Focus ST3 Trader Score: (4) Join Date: May 2004 Location: south east Posts: 19,565 Rep Power: 29	He 's a good lad our Matt __________________ I DONT LIKE EAGLE EITHER

05-05-2012, 08:42 AM	#23
Rsmat BANNED BANNED Garage is empty, add now Trader Score: (2) Join Date: May 2004 Location: either at work or on way :) Posts: 22,815 Rep Power: 0	Cheers guys.

05-05-2012, 11:39 AM	#24
JayCC PassionFord Post Troll Garage is empty, add now Trader Score: (0) Join Date: Jul 2005 Location: Hertfordshire Posts: 2,564 Rep Power: 10	Should have jumped in the car and driven them, lazy fucker! Nice one __________________ PSN : ZetecTurbo XBox : JZetec

05-05-2012, 04:41 PM	#25
cutch Series 1 4x4 cossie 1985 Ford Escort Trader Score: (1) Join Date: Mar 2008 Location: Bonnie Scotland !! Or offshore in Africa!!!! Posts: 2,484 Rep Power: 8	Matt, cant thank you enough mate, it arrived today 1st class! you didnt need to do that. Well you were right the 16mm slipped on straight away no problems, now making the bracket for the breather and should be finished tonight. Cheers bud, i owe you a pint! __________________ My Series 1 4x4 cosworth build I get all my bits from www.mattlewismotorsport.co.uk/

05-05-2012, 05:57 PM	#27
GUZZLER PassionFord Post Whore!! Garage is empty, add now Trader Score: (3) Join Date: Apr 2004 Location: Northants Posts: 8,190 Rep Power: 18	Great post chaps, I've dealt with Matt & Cutch, both good lads, reminds me of why I still browse this forum everyday __________________

05-05-2012, 05:57 PM
PassionFord Ford Focus Paid Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode