Question for the noz ppl

STUCOS · 21-03-2010, 11:32 AM

Going to be fitting a noz kit to mates cozzie,were is the best place to fit the nozzle,was going to fit it in to bottom of intercooler pipe,as he runs hard pipes,but didnt know if dv would effect it ?

cheeRS stu

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

MarK4 · 21-03-2010, 11:40 AM

i would say about 1-2" away from your inlet from what i have seen done on my cars.

This is where its going in my impreza

a couple of inch away from the inlet on my 200, you can see the solonoids in top left of pic.

and fitted to my RS

tomoyb · 21-03-2010, 06:14 PM

mine was mounted onto the t- peice for dump valve on cold side

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21-03-2010, 11:40 AM	#2
MarK4 Too many posts.. I need a life!! Garage is empty, add now Trader Score: (0) Join Date: Jun 2003 Location: Croydon Posts: 771 Rep Power: 9	i would say about 1-2" away from your inlet from what i have seen done on my cars. This is where its going in my impreza a couple of inch away from the inlet on my 200, you can see the solonoids in top left of pic. and fitted to my RS

21-03-2010, 06:14 PM	#3
tomoyb PassionFord Regular Garage is empty, add now Trader Score: (0) Join Date: Oct 2009 Location: scotland Posts: 434 Rep Power: 3	mine was mounted onto the t- peice for dump valve on cold side

21-03-2010, 06:14 PM
PassionFord Ford Focus Paid Advertisement