Adam-M

As above I'm trying to remove my B pillars and seat belts and can't get to the bolt that holds the seat belt as the black cover is really tight and I don't want to break it?

This is the little bugger...

Marc sierra

iTrader: (1)

If I remember correctly you should put the adjuster in the lowest position. You can then rotate the B pillar cover a bit to get to the bolt at the back. But I don't think you can actually remove the black cover.

Adam-M

Thanks Marc I'll give that a try tomorrow it's the last piece of interior trim left on the shell.

Next question, the boot vent flaps that sit behind the bumper, anyone know how they come out? Tried wriggling them but they're pretty solid.

cossie330

iTrader: (1)

I'm pretty sure the black part with the arrows on flicks out to gain access to the seat belt bolt. The flaps in the boot should just pull out but may be a bit tight

Adam-M

Tried that mate maybe I'm being too gentle I'll put abit more force in tomorrow lol

Adam-M

You were right cossie330 cheers, part with the arrow flips down to reveal two star screws that removes the full plastic bit.

Just need to get those two vents out the back without breaking them lol