PF09 TPS
#1
Too many posts.. I need a life!!
Thread Starter
PF09 TPS
I am setting up my TPS and have the closed position set to 0.47V
which rises nicely to 4.78V
But when at 2.4V the sensor shows open circuit on my multi meter when opened slowly the reading come back at 2.9V
Closing the throttle is fine ....
I have tried my mates sensor and this is exactly the same,,,Any ideas.
Cheers
which rises nicely to 4.78V
But when at 2.4V the sensor shows open circuit on my multi meter when opened slowly the reading come back at 2.9V
Closing the throttle is fine ....
I have tried my mates sensor and this is exactly the same,,,Any ideas.
Cheers
#2
Too many posts.. I need a life!!
Thread Starter
One thing i have noticed that when the throttle slowly closes the readings fall and no open circuit happens.
it seems only on the way up.
Strange its with 2 sensors in exactly the same position.
it seems only on the way up.
Strange its with 2 sensors in exactly the same position.
#4
Too many posts.. I need a life!!
Thread Starter
Well i am at a total loss...
Just rechecked 0.47V closed - 7.02V fully open ?????
I am thinking by battery may be a bit on the low side but cant see it giving readings like this.
Please some input...
Just rechecked 0.47V closed - 7.02V fully open ?????
I am thinking by battery may be a bit on the low side but cant see it giving readings like this.
Please some input...
Thread
Thread Starter
Forum
Replies
Last Post
Glenn_
Ford Focus ST
78
17-07-2016 10:41 PM