eddyj

as above iv seen a few 2.0 pintos with efi on the engine what do you need to do this


is it just simply change the card to the efi intake ?


and will this give the car a rev limiter as the carbed dosent and I would like 1

slider

you can just put a rev limiter on it, omex do one which is popular

eddyj

so I could put a limiter on a carbed engine ?


is that a big job ?

costina

iTrader: (1)

you need a efi pinto engine as the heads have different intake ports for injectors. also full engine loom and ecu air flow meter and a fuel injection type tank and pump. also needs a return feed to tank.

eddyj

to much work so ,, I have a 1.6 pinto doing car up but not happy with the power or engine


mite just get running gear from a 2.0 twincam

costina

iTrader: (1)

why not buy a 2.3 16 valve scorpio and slot that in the sierra.???

eddyj

is there a lot of changing to be done

rdvil

All of these are bolt on operations, but none of them quick and easy. If you want a more powerful Sierra, easiest and possibly even cheapest way is to buy one. 2.0i GLS or somesuch shouldn't cost much over there.

martysmartie

iTrader: (1)

It would be a lot of work for the little additional power you would gain, I think I would be tempted into looking into bike carbs etc.

Martin