Saff front bumper
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Saff front bumper
Other than the side fittings on the bumper, what else secures it to the car?
The 2 box sections that slot in to the chassis, do they have something securing them?
The 2 box sections that slot in to the chassis, do they have something securing them?
Trending Topics
#8
I've found that life I needed.. It's HERE!!
Thread Starter
I have seen the 40 torx screws but they look they only move the bumper horizontal.... am I right or terribly wrong?
#9
Part of the Furniture
Join Date: Nov 2009
Location: Tunbridge wells Kent
Posts: 176
Likes: 0
Received 16 Likes
on
15 Posts
Hi
They only adjust up and down if they are working correctly
I had trouble with one of mine where the captive nut had come loose
Had to tack it back in place with the mig welder (bit at a time so as not to get things too hot)
Needed a bit of freeing with some wd 40 too
Cheers Tim.
They only adjust up and down if they are working correctly
I had trouble with one of mine where the captive nut had come loose
Had to tack it back in place with the mig welder (bit at a time so as not to get things too hot)
Needed a bit of freeing with some wd 40 too
Cheers Tim.
#10
I've found that life I needed.. It's HERE!!
Thread Starter
Same question for the rear bumper....... do the chassis legs have anything in them for the bumper brackets to sit in/ on?
#11
Part of the Furniture
Join Date: Nov 2009
Location: Tunbridge wells Kent
Posts: 176
Likes: 0
Received 16 Likes
on
15 Posts
Hi Cameron
The rear bumper has a fixing either side
They are plastic turn buttons for want of a better description
There is also two plastic shoes that fit in the body either side that the bumper lugs slide into
The main bumper irons are held in by two torx bolts in the top of the chassis rail in the boot.
There are no rubber inserts in the ends of the chassis rails
You have got height adjusters both sides too.
Cheers Tim.
The rear bumper has a fixing either side
They are plastic turn buttons for want of a better description
There is also two plastic shoes that fit in the body either side that the bumper lugs slide into
The main bumper irons are held in by two torx bolts in the top of the chassis rail in the boot.
There are no rubber inserts in the ends of the chassis rails
You have got height adjusters both sides too.
Cheers Tim.
Thread
Thread Starter
Forum
Replies
Last Post