2WD Sapphire fuel pump cradle
#1
PassionFord Post Whore!!
Thread Starter
2WD Sapphire fuel pump cradle
Can anyone help? A while back there were some posts regarding someone making brand new alloy or stainless steel fuel pump cradles for Sapphire Cosworths. Has anyone bought one and if so can you give me the details of who makes them and how much they cost please. My original one has seen better days.
#2
PassionFord Regular
There was someone selling the in stainless on ebay, think they were over £150 though. Hope that helps, other than that get a good second hand 1 send it for blasting & powder coating then job done, mine cost me £50 all done that was a mint second hand 1 for £30 £10 blasted & powder coted & £10 in all new bolts & rubber bobbins. Looks bang on
The following users liked this post:
cossynut2 (19-02-2015)
The following users liked this post:
cossynut2 (19-02-2015)
#4
PassionFord Regular
iTrader: (7)
I seen this tonight on ebay, not sure if it fits your model. He is selling some nice unusual parts. I dont know this seller.
http://www.ebay.co.uk/itm/Ford-Sierr...item43d821ff1c
http://www.ebay.co.uk/itm/Ford-Sierr...item43d821ff1c
#6
PassionFord Post Whore!!
Thread Starter
I seen this tonight on ebay, not sure if it fits your model. He is selling some nice unusual parts. I dont know this seller.
http://www.ebay.co.uk/itm/Ford-Sierr...item43d821ff1c
http://www.ebay.co.uk/itm/Ford-Sierr...item43d821ff1c
Trending Topics
#9
PassionFord Post Whore!!
Thread Starter
Thanks for the information but the one I got from Gary is in sound condition. Just taken it apart into its 5 sections which are now at the powder coaters . £20 for the silver finish which I think is good value.
#11
help me please
hi I'm restoring my old 2wd cossie I'm desperatly looking for a fuel pump cradle would you now where or how to get my hands on one ? or dose that guy still make them cheers sorry to bother you but ive been looking every where
The following users liked this post:
rscoseuan (21-11-2016)
#15
I've found that life I needed.. It's HERE!!
Can anyone help? A while back there were some posts regarding someone making brand new alloy or stainless steel fuel pump cradles for Sapphire Cosworths. Has anyone bought one and if so can you give me the details of who makes them and how much they cost please. My original one has seen better days.
#16
I'm Finding My Feet Here Now
allot of craddles look f...ed because they were made of half decent steel time there sand blasted in my case i bearnt it of with a blow torch they survive very well
#17
PassionFord Post Whore!!
Thread Starter
I was lucky with the one I got from Gary at RS Breakers and I had it silver powder coated and fitted with new bolts /rubber sleeves etc.
#21
10K+ Poster!!
iTrader: (3)
I had a couple of cradles made from type six stainless steel which is the same stuff that beer barrels are made from, so pretty tough and durable and would probably out live the car they were bolted to in all honesty, how ever the production cost was quite high and I tested the water with the couple I had made but nobody really wanted to pay what I was asking for them so I wasn't going to risk getting a large batch made that would run into thousands of pounds and shelved the idea.
Sierras are us did have some advertised a while back including the internals of the cradle but don't have any advertised now, they probably felt the same as I did with these as if iirc they were are asking around £150 for the whole thing, but probably couldn't get the custom on them either
Sierras are us did have some advertised a while back including the internals of the cradle but don't have any advertised now, they probably felt the same as I did with these as if iirc they were are asking around £150 for the whole thing, but probably couldn't get the custom on them either
Thread
Thread Starter
Forum
Replies
Last Post
kosienutter
General Car Related Discussion.
31
22-08-2015 09:55 AM