Focosmitch

iTrader: (1)

Has any done a filter relocation, if so, where did you get the kit from?

Im about to fit an oil cooler but am tight on room to get a filter and sandwich plate in the stock location.

Any info would be great help

Mitch

Focosmitch

iTrader: (1)

Anyone?

cossiestu

Assuming they're still going, Think Automotive in Isleworth could be worth a look...

lacey

Think auto are still going and that would be a good place to start .
If you need a remote filter head I have some .

Focosmitch

iTrader: (1)

Yeah think are still going, use them quite often.

I have a remote filter housing, thats not the issue, the issue is blanking the original filter housing..

Il talk to think...

Paul_RS

iTrader: (4)

How are you feeding the remote filter housing at the moment? I've seen takeoff plates that fit where the original filter would sit and they direct the oil to the remote filler.

Focosmitch

iTrader: (1)

Im not lol, thats why im asking i want to fit a remote filter head and cooler

cossiestu

Take off plates are just like fitting an oil filter, but with inlet/outlet pipes iirc?

Focosmitch

iTrader: (1)

Thtas right yes, but does anyone know where i can buy one lol.

cossiestu

Could have a look on Demon Tweeks / Burtons websites for a bit of research, then, once you been there, you can get one cheaper / correct part 1st time from Think Automotive, or possibly Rally Design could be worth a go... Or, google Aeroquip and see what comes up.

cossiestu

Mocals website says Matt Lewis Do them, also Merlin Motorsport....

http://www.mocal.co.uk/distributors.html#UK

Focosmitch

iTrader: (1)

Cheers stu, am going to think on friday for fittings and pipe anyway so will just see what they say

cossiestu

There's also RealSteel in Yiewsley, that do American car parts, they'll probably be worth an ask... They might need thread sizes though.