tpaul

hi guys
in process of replacing sump gasket. I have an original to go back on and wanted to know if you need to use or recommend a sealer to use with the gasket, also should i be using a sealer for the two half moon seals
thanks in advance
Paul

cozzy jeff

iTrader: (4)

just use sealer where the half moon seal meet the sump gasket.

use this:
http://www.ebay.co.uk/itm/LOCTITE-59...item4ade151c10

tpaul

Thank you Jeff much appreciated.
Have you made any more progress on yours ?
cheers
Paul

siscossie

iTrader: (4)

As above mate just done mine

cozzy jeff

iTrader: (4)

doing bits and pieces mate,got the new harness in and wired up,had more tanks turned up from spec r so that's this weekends work if the weathers ok.
its about time you started a resto thread paul,would like to see what you've been up to.

tpaul

Hi Jeff glad you have got the tanks,about time. Did you use anything else to put the seal in grease etc or does it go in dry if that makes sense?
My car is totally stripped at the moment and went for paint on Monday, Not going to get back until the new year, ive always wanted to get her painted so have gone for it, My car is standard and is going to stay that way parts permitting.The car has not been used for a while and was well overdue a freshen up leaks etc, so im hopefully going to get all the niggles sorted out and hopefully have her back on the road next year. I would post pics however im borrowing my daughters pc at the mo as mine is broke and i havnt got a camera lol, cant afford both at the mo as im saving for the paintjob etc.
expensive things these cars lol.
Ill try and get some pics when i get her back.
thanks
Paul

cozzy jeff

iTrader: (4)

just put the seals in dry mate and sealant as in the pics above and you should be fine.
looking forward to the pics mate.