what's involved in putting a zetec into....
05-08-2014, 06:47 PM
#1
what's involved in putting a zetec into....
A sierra with either a Cvh/pinto or twinkly please.
I know the pinto uses spacers on the Xmember to lower it so I mates with the type9.
Just wondered what engine mounts & arms etc are required to mate a zetec to a mt75 if you would be so kind.
Also what management, or are carbs a better option. I've got something in my head I might do. Cheapest options please.
Chris
I know the pinto uses spacers on the Xmember to lower it so I mates with the type9.
Just wondered what engine mounts & arms etc are required to mate a zetec to a mt75 if you would be so kind.
Also what management, or are carbs a better option. I've got something in my head I might do. Cheapest options please.
Chris
05-08-2014, 07:23 PM
#2
PassionFord Regular
Join Date: Jun 2007
Location: mold. n.wales
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
use the sump, pick up pipe, engine mounts off a 1.8 cvh. starter motor off a 2.0 dohc Granada auto .zetec flywheel needs redowling to take pinto clutch. that's the basics to get it in.
I used carbs and an after market ecu. theres plenty of options with induction and wiring.
I used carbs and an after market ecu. theres plenty of options with induction and wiring.
05-08-2014, 07:29 PM
#3
Ben
Simplest in terms of getting it running would be a set of bike carbs and Megajolt ECU, I've still got the ECU kicking around someone if you're interested.
Thread
Thread Starter
Forum
Replies
Last Post
kyle_st200
Ford Focus Diesel
5
21-08-2015 09:28 PM