Rozvor

iTrader: (4)

Hi guys

Looking for some straight cut gearbox for my 2WD cosworth one seller offers to me a Type 9 gearbox with straight cut kit saying that supports my horsepower and torque. Questions:

- He says that I'm needed a Sierra XR4 bellhousing and no more. Is ok?

I think that std cosworth flywheel and clutch don't fit with that gearbox but not sure. And what about the starter motor?

Regards

caprizetec170

unless it v6 cossie engine xr4 bellhousing is wrong. dont think a type 9 would really be up to the job of the torque of a cosworth engine

Roscopeco

iTrader: (1)

Thought type 9's were only good for around 160bhp tops ?

Rozvor

iTrader: (4)

Wow, now I've 420bhp and around the same torque but didn't find any other option with straight cut (Only Glebe T5 gearkit)

BRAMMER

iTrader: (23)

Whats wrong with the standard setup, T5 and plated rear diff

Cossie92

I heard (rumours) that these gearboxes could take 500 nm!

mechanic28

iTrader: (5)

i have glebe in mine good kit but fecking noisey lol

oohogwash1

I would go for the T5, the T9 is a good gearbox but not as strong AFIK

XRT_si

iTrader: (2)

Type 9 would be useless at that power.

Quaife used to do a straight cut kit available from CTS. What's wrong with going Glebe?

martysmartie

iTrader: (1)

Correct lol, hence why Ford did not do so.

Lol at trying to compare a T9 to a T5, the latter is one of the strongest gearboxes fitted to a production Ford.

Martin

XRT_si

iTrader: (2)

And the former is one of the weakest

TOOTALL

I broke 2 T9's in a bog standard XR4i. Good job they were cheap to replace.