upgrading from l6 to l8 checklist
23-05-2012, 09:31 AM
#1
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: the Netherlands
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
upgrading from l6 to l8 checklist
As above,
I want to upgrade to closed loop
All I need to do is: ?
-l8 ecu (with suitable chip)
-retrofit a knocksensor to the block (and wire it to the loom/ecu)
-fit a lambdasensor in the downpipe (and wire it to the loom/ecu)
-fit a pf09 tps, and swap the outer wires to the tps
I want to upgrade to closed loop
All I need to do is: ?
-l8 ecu (with suitable chip)
-retrofit a knocksensor to the block (and wire it to the loom/ecu)
-fit a lambdasensor in the downpipe (and wire it to the loom/ecu)
-fit a pf09 tps, and swap the outer wires to the tps
Thread
Thread Starter
Forum
Replies
Last Post
