Sierra Cosworth 4x4 fuel line
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Sierra Cosworth 4x4 fuel line
Good evening everybody,
Mi sierra is losing fuel, and it is in the connectors wich connect the tecalan lines (hard plastic) with metalic line which is fixed to the body.
Do you know how can I take this connectors out of the metalic line, in its both sides?
Does exist any way to do it easily? They are extremely hard, and I begin to think that there is a proper way to take them out
Thanks in advance.
Mi sierra is losing fuel, and it is in the connectors wich connect the tecalan lines (hard plastic) with metalic line which is fixed to the body.
Do you know how can I take this connectors out of the metalic line, in its both sides?
Does exist any way to do it easily? They are extremely hard, and I begin to think that there is a proper way to take them out
Thanks in advance.
#2
I've found that life I needed.. It's HERE!!
I was told you have to push something into the two holes which releases the mechanism and then pull it apart, even though I tried this and it didn't work
#3
Wahay!! I've lost my Virginity!!
Thread Starter
Tosh, it is how you said, and it works.
You don't need to push both holes. You only have to push one of them and you can release it.
Thanks!
You don't need to push both holes. You only have to push one of them and you can release it.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
charliecosworth
Ford Sierra/Sapphire/RS500 Cosworth
3
19-08-2015 02:00 PM