2wd Coolant hose Routing?
#1
15000
Thread Starter
Join Date: Feb 2012
Location: Co Down
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
2wd Coolant hose Routing?
Does it matter which way round the coolant hoses are fitted on the oil filter heat exchanger? Also does it matter which way round the heater hoses are fitted to the bulkhead?
#2
PassionFord Post Whore!!
iTrader: (23)
If you buy a kit the pipes dictate where they should fit
As far as i'm aware when doing mine with a kit from AS
Looking at the oil modine the
left pipe - back of head (next to blue sensor)
right pipe - bottom pipe on bulkhead
top pipe on bulkhead - metal pipe that runs along the head
As far as i'm aware when doing mine with a kit from AS
Looking at the oil modine the
left pipe - back of head (next to blue sensor)
right pipe - bottom pipe on bulkhead
top pipe on bulkhead - metal pipe that runs along the head
#3
15000
Thread Starter
Join Date: Feb 2012
Location: Co Down
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for reply. The kit i have bought is telling me exactly what you've said and the reason i asked is that the hoses i took off were the opposite way. Maybe the previous owner fitted them the wrong way when he replaced the engine after painting the car
#5
I have converted a 2wd to a 4wd with a/c. Can someone please assist how to fit the water pipe from water pump onwards. thanks
emile
emile
Last edited by emilegarage; 01-05-2012 at 02:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
PRO-LINE MOTORSPORT
General Car Related Discussion.
5
28-09-2015 09:54 PM
Russ Payne
Ford Sierra/Sapphire/RS500 Cosworth
1
25-09-2015 08:29 PM