scotty4130

Abs light has been on in the car for a while, after some research here and testing the resistance of sensors, bridging float sensor, checking continuity between pins 9 and 10............Opened up the abs ecu and found scorch marks on the pcb. Just wondering what would have caused this? Don't want to plug another ecu in and have the same thing happen again.

tiny2white

iTrader: (2)

ABS! What's that then

I gave up along time ago trying to get mine going just stuck some brembos on the front and forgot the car ever had it!

DAN400

iTrader: (3)

i messed about with my abs light for a long time,
ended up wireing it into the oil light,
sorted

scotty4130

does that mean you have an abs ecu you don't need dan?

DAN400

iTrader: (3)

no its still in the car and still works , i just could nt get my feckin light to go out for mot so i did a bit of cheating

martysmartie

iTrader: (1)

Poor earth connection I suspect.

Martin

scotty4130

Any hints which earths i should check/uprate in relation to preventing this happen again?