pyropete125

Hi I have seen pics of the rose joints on the rear STA of the modded ones for caster/camber, but I am looking for a pic of the individual components and possibly some dimensions.

As in, is the threaded adjuster the heim joint threaded on both the inside and outside, diameter of the sleeve, length, etc?

I am going to be modding my beam this winter and these are some of the things I still need to figure out.

Thanks,
Pete

pyropete125

really? nobody has a close up shot or info on sizes?

robrs2

Theres plenty of info on the net and use search on here. There was a thread only last week about it.

Sonic Boom

iTrader: (11)

The rose joint sizes on my adrenaline rear beam are 7/8th 14 tpi (UNF)
If that's any help, it's currently off the car I can take some measurements of the bushes tomorrow if you like.
Rich

pyropete125

That would be awesome!

I have a mustang cobra 8.8 IRS center w/ 4.10 traction lock on the beam now but I want to make it all adjustable and stiffen it up a bit.

Most pics I see are just showing that part but not really detailed.

Thanks,
Pete