Actuator problems
#1
Actuator problems
Hi all, just wondering if someone may know the answer to a problem im having getting a suitable end for my actuator.
The actuator is a -31 and the turbo is a universal turbos T38.
I cant seem to get hold of the right end for the actuator as the long one i have is much too long and when it reaches the end of the thread it holds the wastegate door open.
The shorter one i have is so short that with the wastegate fully closed, its nowhere near the actuator rod!!
I could cut the rod down as some people have suggested but there must be a better way surely!
Any advice will be much appreciated!!
The actuator is a -31 and the turbo is a universal turbos T38.
I cant seem to get hold of the right end for the actuator as the long one i have is much too long and when it reaches the end of the thread it holds the wastegate door open.
The shorter one i have is so short that with the wastegate fully closed, its nowhere near the actuator rod!!
I could cut the rod down as some people have suggested but there must be a better way surely!
Any advice will be much appreciated!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
DavidK
Ford Sierra/Sapphire/RS500 Cosworth
1
27-09-2015 02:55 PM
Russ Payne
Ford Sierra/Sapphire/RS500 Cosworth
1
25-09-2015 08:29 PM