Overboosting...???
28-02-2008, 01:27 PM
#2
Rubber Rhino Crew
iTrader: (1)
Join Date: Dec 2005
Location: Birmingham
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
amal valve controlls the actuator electronically.
Also check the vacum pipes from plenum to amal..then from amal to turbo if any come off or split then actuator will not open when it should making it overboost.
Cheers
Dan
Also check the vacum pipes from plenum to amal..then from amal to turbo if any come off or split then actuator will not open when it should making it overboost.
Cheers
Dan
28-02-2008, 02:57 PM
#4
PassionFord Regular
Thread Starter
Join Date: Oct 2004
Location: In a house
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
29-02-2008, 05:31 PM
#7
fuelling is not set for extra boost = melted engine worst case scenario!
If its extreme like my was, then its not really good for anything, the turbo is just boosting what it can, no actuator control at all, could result in dead turbo and engine.
If its extreme like my was, then its not really good for anything, the turbo is just boosting what it can, no actuator control at all, could result in dead turbo and engine.