sierra Coilovers
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Jan 2007
Location: Cumbria
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
sierra Coilovers
what weight springs would be recomended on a sierra p100 with a 2.8 v6 in, that will be mainly driven on the road
iv got a set of AVO coilovers on it, but the springs are to short and the front bumper is almost on the ground with 7" 200Lb springs
Any recomendations
its lower than pic
iv got a set of AVO coilovers on it, but the springs are to short and the front bumper is almost on the ground with 7" 200Lb springs
Any recomendations
its lower than pic
#4
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Jan 2007
Location: Cumbria
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
theres still alot of work to be done on it but ill put some pics up.
its had a bit more work done since these pics but there is still a long way to go yet.
its had a bit more work done since these pics but there is still a long way to go yet.
#7
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Jan 2007
Location: Cumbria
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
i used a 2.8 cos i had it lying around and i dont really have the money to buy a cosy motor, unless you know someone donating one to a good cause?
Trending Topics
#10
I would like to see a front corner pictures.
the 2.8 v6 with two exauhst ports? everything I know... that is not the motor to use.
I rebuilt mine and knew no better.
trying source me a cosworth v6 now.
nice car though!!!
TF
the 2.8 v6 with two exauhst ports? everything I know... that is not the motor to use.
I rebuilt mine and knew no better.
trying source me a cosworth v6 now.
nice car though!!!
TF
Thread
Thread Starter
Forum
Replies
Last Post
chowfornow
Ford Non RS / XR / ST parts for sale.
14
05-01-2019 09:01 PM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM